From: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
To: linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
"Benoît Cousson"
<bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"Bin Liu" <b-liu-l0cyMroinI0@public.gmane.org>
Subject: Re: [PATCH 7/7] ARM: dts: Use ti-sysc module driver for omap4 musb
Date: Tue, 10 Oct 2017 10:01:28 -0700 [thread overview]
Message-ID: <20171010170128.GW4394@atomide.com> (raw)
In-Reply-To: <20170929223411.9691-8-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
* Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org> [170929 15:35]:
> Let's make use of the generic ti-sysc module for musb to have
> a child device with working runtime PM.
...
> + target-module@4a0ab000 {
> + compatible = "ti,sysc-omap4";
> ti,hwmods = "usb_otg_hs";
And this should be compatible with "ti,sysc-omap2", I messed it up while
changing from type1 and 2 to omap2 and omap4. Will apply the updated
version below.
Regards,
Tony
8< ---------------------
>From tony Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
Date: Fri, 29 Sep 2017 08:20:50 -0700
Subject: [PATCH] ARM: dts: Use ti-sysc module driver for omap4 musb
Let's make use of the generic ti-sysc module for musb to have
a child device with working runtime PM.
Cc: Bin Liu <b-liu-l0cyMroinI0@public.gmane.org>
Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
---
arch/arm/boot/dts/omap4.dtsi | 36 ++++++++++++++++++++++++------------
1 file changed, 24 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -1117,19 +1117,31 @@
reg-names = "otghs_control";
};
- usb_otg_hs: usb_otg_hs@4a0ab000 {
- compatible = "ti,omap4-musb";
- reg = <0x4a0ab000 0x7ff>;
- interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "mc", "dma";
+ target-module@4a0ab000 {
+ compatible = "ti,sysc-omap2";
ti,hwmods = "usb_otg_hs";
- usb-phy = <&usb2_phy>;
- phys = <&usb2_phy>;
- phy-names = "usb2-phy";
- multipoint = <1>;
- num-eps = <16>;
- ram-bits = <12>;
- ctrl-module = <&omap_control_usbotg>;
+ reg = <0x4a0ab000 0x4>,
+ <0x4a0ab004 0x4>,
+ <0x4a0ab008 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x4a0ab000 0x1000>;
+
+ usb_otg_hs: otg@0 {
+ compatible = "ti,omap2-musb";
+ reg = <0x0 0x7ff>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mc", "dma";
+ usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
+ multipoint = <1>;
+ num-eps = <16>;
+ ram-bits = <12>;
+ ctrl-module = <&omap_control_usbotg>;
+ };
};
aes1: aes@4b501000 {
--
2.14.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 7/7] ARM: dts: Use ti-sysc module driver for omap4 musb
Date: Tue, 10 Oct 2017 10:01:28 -0700 [thread overview]
Message-ID: <20171010170128.GW4394@atomide.com> (raw)
In-Reply-To: <20170929223411.9691-8-tony@atomide.com>
* Tony Lindgren <tony@atomide.com> [170929 15:35]:
> Let's make use of the generic ti-sysc module for musb to have
> a child device with working runtime PM.
...
> + target-module at 4a0ab000 {
> + compatible = "ti,sysc-omap4";
> ti,hwmods = "usb_otg_hs";
And this should be compatible with "ti,sysc-omap2", I messed it up while
changing from type1 and 2 to omap2 and omap4. Will apply the updated
version below.
Regards,
Tony
8< ---------------------
>From tony Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Fri, 29 Sep 2017 08:20:50 -0700
Subject: [PATCH] ARM: dts: Use ti-sysc module driver for omap4 musb
Let's make use of the generic ti-sysc module for musb to have
a child device with working runtime PM.
Cc: Bin Liu <b-liu@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/boot/dts/omap4.dtsi | 36 ++++++++++++++++++++++++------------
1 file changed, 24 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -1117,19 +1117,31 @@
reg-names = "otghs_control";
};
- usb_otg_hs: usb_otg_hs at 4a0ab000 {
- compatible = "ti,omap4-musb";
- reg = <0x4a0ab000 0x7ff>;
- interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "mc", "dma";
+ target-module at 4a0ab000 {
+ compatible = "ti,sysc-omap2";
ti,hwmods = "usb_otg_hs";
- usb-phy = <&usb2_phy>;
- phys = <&usb2_phy>;
- phy-names = "usb2-phy";
- multipoint = <1>;
- num-eps = <16>;
- ram-bits = <12>;
- ctrl-module = <&omap_control_usbotg>;
+ reg = <0x4a0ab000 0x4>,
+ <0x4a0ab004 0x4>,
+ <0x4a0ab008 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x4a0ab000 0x1000>;
+
+ usb_otg_hs: otg at 0 {
+ compatible = "ti,omap2-musb";
+ reg = <0x0 0x7ff>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mc", "dma";
+ usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
+ multipoint = <1>;
+ num-eps = <16>;
+ ram-bits = <12>;
+ ctrl-module = <&omap_control_usbotg>;
+ };
};
aes1: aes at 4b501000 {
--
2.14.2
next prev parent reply other threads:[~2017-10-10 17:01 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-29 22:34 [PATCHv4 0/7] Fix remaining issues to drop more omap platform data Tony Lindgren
2017-09-29 22:34 ` Tony Lindgren
[not found] ` <20170929223411.9691-1-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2017-09-29 22:34 ` [PATCH 1/7] dt-bindings: bus: Minimal TI sysc interconnect target module binding Tony Lindgren
2017-09-29 22:34 ` Tony Lindgren
2017-10-01 13:11 ` Sebastian Reichel
2017-10-01 13:11 ` Sebastian Reichel
2017-10-01 17:14 ` Tony Lindgren
2017-10-01 17:14 ` Tony Lindgren
[not found] ` <20171001171406.GL4394-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2017-10-01 20:48 ` Sebastian Reichel
2017-10-01 20:48 ` Sebastian Reichel
2017-10-01 21:03 ` Tony Lindgren
2017-10-01 21:03 ` Tony Lindgren
[not found] ` <20170929223411.9691-2-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2017-10-10 15:46 ` Rob Herring
2017-10-10 15:46 ` Rob Herring
2017-10-10 16:45 ` Tony Lindgren
2017-10-10 16:45 ` Tony Lindgren
2017-09-29 22:34 ` [PATCH 2/7] ARM: OMAP2+: Parse module IO range from dts for legacy "ti,hwmods" support Tony Lindgren
2017-09-29 22:34 ` [PATCH 2/7] ARM: OMAP2+: Parse module IO range from dts for legacy "ti, hwmods" support Tony Lindgren
2017-09-29 22:34 ` [PATCH 3/7] ARM: OMAP2+: Populate legacy resources for dma and smartreflex Tony Lindgren
2017-09-29 22:34 ` Tony Lindgren
2017-09-29 22:34 ` [PATCH 4/7] bus: ti-sysc: Add minimal TI sysc interconnect target driver Tony Lindgren
2017-09-29 22:34 ` Tony Lindgren
2017-09-29 22:34 ` Tony Lindgren
[not found] ` <20170929223411.9691-5-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2017-10-13 17:51 ` Tony Lindgren
2017-10-13 17:51 ` Tony Lindgren
2017-10-13 17:51 ` Tony Lindgren
2017-09-29 22:34 ` [PATCH 5/7] ARM: dts: Add nodes for missing omap4 interconnect target modules Tony Lindgren
2017-09-29 22:34 ` Tony Lindgren
[not found] ` <20170929223411.9691-6-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2017-10-11 15:54 ` Peter Ujfalusi
2017-10-11 15:54 ` Peter Ujfalusi
[not found] ` <f5c57f0b-1423-c362-0fda-4069b77a2e38-l0cyMroinI0@public.gmane.org>
2017-10-11 16:58 ` Sebastian Reichel
2017-10-11 16:58 ` Sebastian Reichel
2017-10-12 6:07 ` Peter Ujfalusi
2017-10-12 6:07 ` Peter Ujfalusi
[not found] ` <da8d1d7f-f16d-8d71-cf49-acff79614610-l0cyMroinI0@public.gmane.org>
2017-10-12 8:40 ` Matthijs van Duin
2017-10-12 8:40 ` Matthijs van Duin
2017-10-12 9:10 ` Peter Ujfalusi
2017-10-12 9:10 ` Peter Ujfalusi
2017-10-13 16:46 ` Tony Lindgren
2017-10-13 16:46 ` Tony Lindgren
2017-09-29 22:34 ` [PATCH 6/7] ARM: dts: Configure SmartReflex only to idle the interconnect target module Tony Lindgren
2017-09-29 22:34 ` Tony Lindgren
2017-09-29 22:34 ` [PATCH 7/7] ARM: dts: Use ti-sysc module driver for omap4 musb Tony Lindgren
2017-09-29 22:34 ` Tony Lindgren
[not found] ` <20170929223411.9691-8-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2017-10-10 17:01 ` Tony Lindgren [this message]
2017-10-10 17:01 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171010170128.GW4394@atomide.com \
--to=tony-4v6ys6ai5vpbdgjk7y7tuq@public.gmane.org \
--cc=b-liu-l0cyMroinI0@public.gmane.org \
--cc=bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.