All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vinod Koul <vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
To: Dmitry Osipenko <digetx-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Thierry Reding
	<thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Jonathan Hunter
	<jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
	Laxman Dewangan
	<ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
	dmaengine-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH] dmaengine: tegra-apb: Support non-flow controlled slave configuration
Date: Thu, 12 Oct 2017 22:23:11 +0530	[thread overview]
Message-ID: <20171012165310.GU30097@localhost> (raw)
In-Reply-To: <20171003223838.31834-1-digetx-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

On Wed, Oct 04, 2017 at 01:38:38AM +0300, Dmitry Osipenko wrote:
> This allows DMA client to issue a non-flow controlled TX. In particular
> it is needed for the fuse driver that reads fuse registers using APBDMA
> to workaround a HW bug that results in hang when CPU and DMA perform
> simultaneous access to fuse peripheral.
> 
> Signed-off-by: Dmitry Osipenko <digetx-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> ---
>  drivers/dma/tegra20-apb-dma.c | 19 ++++++++++++++-----
>  1 file changed, 14 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
> index b9d75a54c896..a177039713a7 100644
> --- a/drivers/dma/tegra20-apb-dma.c
> +++ b/drivers/dma/tegra20-apb-dma.c
> @@ -353,7 +353,8 @@ static int tegra_dma_slave_config(struct dma_chan *dc,
>  	}
>  
>  	memcpy(&tdc->dma_sconfig, sconfig, sizeof(*sconfig));
> -	if (tdc->slave_id == TEGRA_APBDMA_SLAVE_ID_INVALID) {
> +	if (tdc->slave_id == TEGRA_APBDMA_SLAVE_ID_INVALID &&
> +	    sconfig->device_fc) {
>  		if (sconfig->slave_id > TEGRA_APBDMA_CSR_REQ_SEL_MASK)
>  			return -EINVAL;
>  		tdc->slave_id = sconfig->slave_id;
> @@ -970,8 +971,13 @@ static struct dma_async_tx_descriptor *tegra_dma_prep_slave_sg(
>  					TEGRA_APBDMA_AHBSEQ_WRAP_SHIFT;
>  	ahb_seq |= TEGRA_APBDMA_AHBSEQ_BUS_WIDTH_32;
>  
> -	csr |= TEGRA_APBDMA_CSR_ONCE | TEGRA_APBDMA_CSR_FLOW;
> -	csr |= tdc->slave_id << TEGRA_APBDMA_CSR_REQ_SEL_SHIFT;
> +	csr |= TEGRA_APBDMA_CSR_ONCE ;
				    ^^^
Checkpatch should have complained here, no space before ; please

> +
> +	if (tdc->slave_id != TEGRA_APBDMA_SLAVE_ID_INVALID) {
> +		csr |= TEGRA_APBDMA_CSR_FLOW;
> +		csr |= tdc->slave_id << TEGRA_APBDMA_CSR_REQ_SEL_SHIFT;
> +	}
> +
>  	if (flags & DMA_PREP_INTERRUPT)
>  		csr |= TEGRA_APBDMA_CSR_IE_EOC;
>  
> @@ -1110,10 +1116,13 @@ static struct dma_async_tx_descriptor *tegra_dma_prep_dma_cyclic(
>  					TEGRA_APBDMA_AHBSEQ_WRAP_SHIFT;
>  	ahb_seq |= TEGRA_APBDMA_AHBSEQ_BUS_WIDTH_32;
>  
> -	csr |= TEGRA_APBDMA_CSR_FLOW;
> +	if (tdc->slave_id != TEGRA_APBDMA_SLAVE_ID_INVALID) {
> +		csr |= TEGRA_APBDMA_CSR_FLOW;
> +		csr |= tdc->slave_id << TEGRA_APBDMA_CSR_REQ_SEL_SHIFT;
> +	}
> +
>  	if (flags & DMA_PREP_INTERRUPT)
>  		csr |= TEGRA_APBDMA_CSR_IE_EOC;
> -	csr |= tdc->slave_id << TEGRA_APBDMA_CSR_REQ_SEL_SHIFT;
>  
>  	apb_seq |= TEGRA_APBDMA_APBSEQ_WRAP_WORD_1;
>  
> -- 
> 2.14.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe dmaengine" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
~Vinod

  parent reply	other threads:[~2017-10-12 16:53 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-03 22:38 [PATCH] dmaengine: tegra-apb: Support non-flow controlled slave configuration Dmitry Osipenko
     [not found] ` <20171003223838.31834-1-digetx-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-10-05 12:20   ` Jon Hunter
2017-10-12 16:53   ` Vinod Koul [this message]
2017-10-12 17:35     ` Dmitry Osipenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171012165310.GU30097@localhost \
    --to=vinod.koul-ral2jqcrhueavxtiumwx3w@public.gmane.org \
    --cc=digetx-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=dmaengine-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
    --cc=ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
    --cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.