From: robh@kernel.org (Rob Herring)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] arm64: dts: fix unit-address leading 0s
Date: Fri, 13 Oct 2017 12:54:52 -0500 [thread overview]
Message-ID: <20171013175452.1198-2-robh@kernel.org> (raw)
In-Reply-To: <20171013175452.1198-1-robh@kernel.org>
Fix dtc warnings for 'simple_bus_reg' due to leading 0s. Converted using
the following command:
perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find arch/arm64/boot/dts -type -f -name '*.dts*'
Signed-off-by: Rob Herring <robh@kernel.org>
---
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 16 +++---
arch/arm64/boot/dts/apm/apm-shadowcat.dtsi | 6 +-
arch/arm64/boot/dts/apm/apm-storm.dtsi | 4 +-
arch/arm64/boot/dts/arm/foundation-v8.dtsi | 14 ++---
arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts | 2 +-
arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi | 24 ++++----
.../boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts | 2 +-
.../arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts | 2 +-
arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi | 4 +-
.../boot/dts/broadcom/stingray/stingray-clock.dtsi | 12 ++--
.../boot/dts/broadcom/stingray/stingray-fs4.dtsi | 4 +-
.../dts/broadcom/stingray/stingray-pinctrl.dtsi | 4 +-
.../boot/dts/broadcom/stingray/stingray-sata.dtsi | 32 +++++------
.../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 66 +++++++++++-----------
arch/arm64/boot/dts/cavium/thunder-88xx.dts | 2 +-
arch/arm64/boot/dts/cavium/thunder-88xx.dtsi | 32 +++++------
arch/arm64/boot/dts/hisilicon/hip05-d02.dts | 2 +-
arch/arm64/boot/dts/hisilicon/hip06-d03.dts | 2 +-
arch/arm64/boot/dts/marvell/armada-7040-db.dts | 2 +-
arch/arm64/boot/dts/marvell/armada-8040-db.dts | 2 +-
arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 2 +-
arch/arm64/boot/dts/marvell/armada-8080-db.dts | 2 +-
arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi | 4 +-
arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi | 4 +-
.../dts/marvell/armada-ap810-ap0-octa-core.dtsi | 4 +-
arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 6 +-
arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 6 +-
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 10 ++--
arch/arm64/boot/dts/qcom/msm8916.dtsi | 6 +-
arch/arm64/boot/dts/qcom/msm8996.dtsi | 12 ++--
30 files changed, 145 insertions(+), 145 deletions(-)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 8c8db1b057df..0daad839f92c 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -178,7 +178,7 @@
#size-cells = <0>;
};
- usb_otg: usb at 01c19000 {
+ usb_otg: usb at 1c19000 {
compatible = "allwinner,sun8i-a33-musb";
reg = <0x01c19000 0x0400>;
clocks = <&ccu CLK_BUS_OTG>;
@@ -191,7 +191,7 @@
status = "disabled";
};
- usbphy: phy at 01c19400 {
+ usbphy: phy at 1c19400 {
compatible = "allwinner,sun50i-a64-usb-phy";
reg = <0x01c19400 0x14>,
<0x01c1a800 0x4>,
@@ -211,7 +211,7 @@
#phy-cells = <1>;
};
- ehci0: usb at 01c1a000 {
+ ehci0: usb at 1c1a000 {
compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
reg = <0x01c1a000 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
@@ -223,7 +223,7 @@
status = "disabled";
};
- ohci0: usb at 01c1a400 {
+ ohci0: usb at 1c1a400 {
compatible = "allwinner,sun50i-a64-ohci", "generic-ohci";
reg = <0x01c1a400 0x100>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
@@ -233,7 +233,7 @@
status = "disabled";
};
- ehci1: usb at 01c1b000 {
+ ehci1: usb at 1c1b000 {
compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
reg = <0x01c1b000 0x100>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
@@ -247,7 +247,7 @@
status = "disabled";
};
- ohci1: usb at 01c1b400 {
+ ohci1: usb at 1c1b400 {
compatible = "allwinner,sun50i-a64-ohci", "generic-ohci";
reg = <0x01c1b400 0x100>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
@@ -259,7 +259,7 @@
status = "disabled";
};
- ccu: clock at 01c20000 {
+ ccu: clock at 1c20000 {
compatible = "allwinner,sun50i-a64-ccu";
reg = <0x01c20000 0x400>;
clocks = <&osc24M>, <&osc32k>;
@@ -486,7 +486,7 @@
#reset-cells = <1>;
};
- r_pio: pinctrl at 01f02c00 {
+ r_pio: pinctrl at 1f02c00 {
compatible = "allwinner,sun50i-a64-r-pinctrl";
reg = <0x01f02c00 0x400>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
index c9ffffb96e43..d8ecd1661461 100644
--- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
@@ -19,7 +19,7 @@
#address-cells = <2>;
#size-cells = <0>;
- cpu at 000 {
+ cpu at 0 {
device_type = "cpu";
compatible = "apm,strega", "arm,armv8";
reg = <0x0 0x000>;
@@ -29,7 +29,7 @@
#clock-cells = <1>;
clocks = <&pmd0clk 0>;
};
- cpu at 001 {
+ cpu at 1 {
device_type = "cpu";
compatible = "apm,strega", "arm,armv8";
reg = <0x0 0x001>;
@@ -125,7 +125,7 @@
<0x0 0x780a0000 0x0 0x20000>, /* GIC CPU */
<0x0 0x780c0000 0x0 0x10000>, /* GIC VCPU Control */
<0x0 0x780e0000 0x0 0x20000>; /* GIC VCPU */
- v2m0: v2m at 00000 {
+ v2m0: v2m at 0 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x0 0x0 0x0 0x1000>;
diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi
index c09a36fed917..00e82b8e9a19 100644
--- a/arch/arm64/boot/dts/apm/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi
@@ -19,7 +19,7 @@
#address-cells = <2>;
#size-cells = <0>;
- cpu at 000 {
+ cpu at 0 {
device_type = "cpu";
compatible = "apm,potenza", "arm,armv8";
reg = <0x0 0x000>;
@@ -27,7 +27,7 @@
cpu-release-addr = <0x1 0x0000fff8>;
next-level-cache = <&xgene_L2_0>;
};
- cpu at 001 {
+ cpu at 1 {
device_type = "cpu";
compatible = "apm,potenza", "arm,armv8";
reg = <0x0 0x001>;
diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dtsi b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
index 8ecdd4331980..21a7a575f02c 100644
--- a/arch/arm64/boot/dts/arm/foundation-v8.dtsi
+++ b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
@@ -97,7 +97,7 @@
timeout-sec = <30>;
};
- smb at 08000000 {
+ smb at 8000000 {
compatible = "arm,vexpress,v2m-p1", "simple-bus";
arm,v2m-memory-map = "rs1";
#address-cells = <2>; /* SMB chipselect number and offset */
@@ -189,12 +189,12 @@
#size-cells = <1>;
ranges = <0 3 0 0x200000>;
- v2m_sysreg: sysreg at 010000 {
+ v2m_sysreg: sysreg at 10000 {
compatible = "arm,vexpress-sysreg";
reg = <0x010000 0x1000>;
};
- v2m_serial0: uart at 090000 {
+ v2m_serial0: uart at 90000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x090000 0x1000>;
interrupts = <5>;
@@ -202,7 +202,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial1: uart at 0a0000 {
+ v2m_serial1: uart at a0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0a0000 0x1000>;
interrupts = <6>;
@@ -210,7 +210,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial2: uart at 0b0000 {
+ v2m_serial2: uart at b0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0b0000 0x1000>;
interrupts = <7>;
@@ -218,7 +218,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial3: uart at 0c0000 {
+ v2m_serial3: uart at c0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0c0000 0x1000>;
interrupts = <8>;
@@ -226,7 +226,7 @@
clock-names = "uartclk", "apb_pclk";
};
- virtio-block at 0130000 {
+ virtio-block at 130000 {
compatible = "virtio,mmio";
reg = <0x130000 0x200>;
interrupts = <42>;
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
index a83ed2c6bbf7..a1b73f46b625 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
@@ -104,7 +104,7 @@
<0 63 4>;
};
- smb at 08000000 {
+ smb at 8000000 {
compatible = "simple-bus";
#address-cells = <2>;
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
index 528875c75598..6cadb779729d 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
@@ -60,14 +60,14 @@
#size-cells = <1>;
ranges = <0 3 0 0x200000>;
- v2m_sysreg: sysreg at 010000 {
+ v2m_sysreg: sysreg at 10000 {
compatible = "arm,vexpress-sysreg";
reg = <0x010000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
};
- v2m_sysctl: sysctl at 020000 {
+ v2m_sysctl: sysctl at 20000 {
compatible = "arm,sp810", "arm,primecell";
reg = <0x020000 0x1000>;
clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>;
@@ -78,7 +78,7 @@
assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
};
- aaci at 040000 {
+ aaci at 40000 {
compatible = "arm,pl041", "arm,primecell";
reg = <0x040000 0x1000>;
interrupts = <11>;
@@ -86,7 +86,7 @@
clock-names = "apb_pclk";
};
- mmci at 050000 {
+ mmci at 50000 {
compatible = "arm,pl180", "arm,primecell";
reg = <0x050000 0x1000>;
interrupts = <9 10>;
@@ -98,7 +98,7 @@
clock-names = "mclk", "apb_pclk";
};
- kmi at 060000 {
+ kmi at 60000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x060000 0x1000>;
interrupts = <12>;
@@ -106,7 +106,7 @@
clock-names = "KMIREFCLK", "apb_pclk";
};
- kmi at 070000 {
+ kmi at 70000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x070000 0x1000>;
interrupts = <13>;
@@ -114,7 +114,7 @@
clock-names = "KMIREFCLK", "apb_pclk";
};
- v2m_serial0: uart at 090000 {
+ v2m_serial0: uart at 90000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x090000 0x1000>;
interrupts = <5>;
@@ -122,7 +122,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial1: uart at 0a0000 {
+ v2m_serial1: uart at a0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0a0000 0x1000>;
interrupts = <6>;
@@ -130,7 +130,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial2: uart at 0b0000 {
+ v2m_serial2: uart at b0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0b0000 0x1000>;
interrupts = <7>;
@@ -138,7 +138,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial3: uart at 0c0000 {
+ v2m_serial3: uart at c0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0c0000 0x1000>;
interrupts = <8>;
@@ -146,7 +146,7 @@
clock-names = "uartclk", "apb_pclk";
};
- wdt at 0f0000 {
+ wdt at f0000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0f0000 0x1000>;
interrupts = <0>;
@@ -219,7 +219,7 @@
};
};
- virtio-block at 0130000 {
+ virtio-block at 130000 {
compatible = "virtio,mmio";
reg = <0x130000 0x200>;
interrupts = <42>;
diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
index e3a171162bb4..124dceeada1f 100644
--- a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
+++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
@@ -128,7 +128,7 @@
};
};
- smb at 08000000 {
+ smb at 8000000 {
compatible = "simple-bus";
#address-cells = <2>;
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts
index ab4ae1a32fab..f00c21e0767e 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts
@@ -114,7 +114,7 @@
reg = <0x04000000 0x06400000>; /* 100MB */
};
- partition at 0a400000{
+ partition at a400000{
label = "ncustfs";
reg = <0x0a400000 0x35c00000>; /* 860MB */
};
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
index 35c8457e3d1f..4a2a6af8e752 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
@@ -77,7 +77,7 @@
next-level-cache = <&CLUSTER0_L2>;
};
- CLUSTER0_L2: l2-cache at 000 {
+ CLUSTER0_L2: l2-cache at 0 {
compatible = "cache";
};
};
@@ -367,7 +367,7 @@
#size-cells = <1>;
ranges = <0 0x652e0000 0x80000>;
- v2m0: v2m at 00000 {
+ v2m0: v2m at 0 {
compatible = "arm,gic-v2m-frame";
interrupt-parent = <&gic>;
msi-controller;
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
index cbc43376e25e..3a4d4524b5ed 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
@@ -46,7 +46,7 @@
clock-mult = <1>;
};
- genpll0: genpll0 at 0001d104 {
+ genpll0: genpll0 at 1d104 {
#clock-cells = <1>;
compatible = "brcm,sr-genpll0";
reg = <0x0001d104 0x32>,
@@ -58,7 +58,7 @@
"clk_paxc_axi";
};
- genpll3: genpll3 at 0001d1e0 {
+ genpll3: genpll3 at 1d1e0 {
#clock-cells = <1>;
compatible = "brcm,sr-genpll3";
reg = <0x0001d1e0 0x32>,
@@ -68,7 +68,7 @@
"clk_sdio";
};
- genpll4: genpll4 at 0001d214 {
+ genpll4: genpll4 at 1d214 {
#clock-cells = <1>;
compatible = "brcm,sr-genpll4";
reg = <0x0001d214 0x32>,
@@ -80,7 +80,7 @@
"clk_bridge_fscpu";
};
- genpll5: genpll5 at 0001d248 {
+ genpll5: genpll5 at 1d248 {
#clock-cells = <1>;
compatible = "brcm,sr-genpll5";
reg = <0x0001d248 0x32>,
@@ -90,7 +90,7 @@
"crypto_ae_clk", "raid_ae_clk";
};
- lcpll0: lcpll0 at 0001d0c4 {
+ lcpll0: lcpll0 at 1d0c4 {
#clock-cells = <1>;
compatible = "brcm,sr-lcpll0";
reg = <0x0001d0c4 0x3c>,
@@ -101,7 +101,7 @@
"clk_sata_500";
};
- lcpll1: lcpll1 at 0001d138 {
+ lcpll1: lcpll1 at 1d138 {
#clock-cells = <1>;
compatible = "brcm,sr-lcpll1";
reg = <0x0001d138 0x3c>,
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi
index 8bf1dc6b46ca..9666969c8c88 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi
@@ -36,7 +36,7 @@
#size-cells = <1>;
ranges = <0x0 0x0 0x67000000 0x00800000>;
- crypto_mbox: crypto_mbox at 00000000 {
+ crypto_mbox: crypto_mbox at 0 {
compatible = "brcm,iproc-flexrm-mbox";
reg = <0x00000000 0x200000>;
msi-parent = <&gic_its 0x4100>;
@@ -44,7 +44,7 @@
dma-coherent;
};
- raid_mbox: raid_mbox at 00400000 {
+ raid_mbox: raid_mbox at 400000 {
compatible = "brcm,iproc-flexrm-mbox";
reg = <0x00400000 0x200000>;
dma-coherent;
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
index 15214d05fec1..8a3a770e8f2c 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
@@ -32,7 +32,7 @@
#include <dt-bindings/pinctrl/brcm,pinctrl-stingray.h>
- pinconf: pinconf at 00140000 {
+ pinconf: pinconf at 140000 {
compatible = "pinconf-single";
reg = <0x00140000 0x250>;
pinctrl-single,register-width = <32>;
@@ -40,7 +40,7 @@
/* pinconf functions */
};
- pinmux: pinmux at 0014029c {
+ pinmux: pinmux at 14029c {
compatible = "pinctrl-single";
reg = <0x0014029c 0x250>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
index a774709388df..4b5465da81d8 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
@@ -36,7 +36,7 @@
#size-cells = <1>;
ranges = <0x0 0x0 0x67d00000 0x00800000>;
- sata0: ahci at 00210000 {
+ sata0: ahci at 210000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00210000 0x1000>;
reg-names = "ahci";
@@ -52,7 +52,7 @@
};
};
- sata_phy0: sata_phy at 00212100 {
+ sata_phy0: sata_phy at 212100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00212100 0x1000>;
reg-names = "phy";
@@ -66,7 +66,7 @@
};
};
- sata1: ahci at 00310000 {
+ sata1: ahci at 310000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00310000 0x1000>;
reg-names = "ahci";
@@ -82,7 +82,7 @@
};
};
- sata_phy1: sata_phy at 00312100 {
+ sata_phy1: sata_phy at 312100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00312100 0x1000>;
reg-names = "phy";
@@ -96,7 +96,7 @@
};
};
- sata2: ahci at 00120000 {
+ sata2: ahci at 120000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00120000 0x1000>;
reg-names = "ahci";
@@ -112,7 +112,7 @@
};
};
- sata_phy2: sata_phy at 00122100 {
+ sata_phy2: sata_phy at 122100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00122100 0x1000>;
reg-names = "phy";
@@ -126,7 +126,7 @@
};
};
- sata3: ahci at 00130000 {
+ sata3: ahci at 130000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00130000 0x1000>;
reg-names = "ahci";
@@ -142,7 +142,7 @@
};
};
- sata_phy3: sata_phy at 00132100 {
+ sata_phy3: sata_phy at 132100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00132100 0x1000>;
reg-names = "phy";
@@ -156,7 +156,7 @@
};
};
- sata4: ahci at 00330000 {
+ sata4: ahci at 330000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00330000 0x1000>;
reg-names = "ahci";
@@ -172,7 +172,7 @@
};
};
- sata_phy4: sata_phy at 00332100 {
+ sata_phy4: sata_phy at 332100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00332100 0x1000>;
reg-names = "phy";
@@ -186,7 +186,7 @@
};
};
- sata5: ahci at 00400000 {
+ sata5: ahci at 400000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00400000 0x1000>;
reg-names = "ahci";
@@ -202,7 +202,7 @@
};
};
- sata_phy5: sata_phy at 00402100 {
+ sata_phy5: sata_phy at 402100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00402100 0x1000>;
reg-names = "phy";
@@ -216,7 +216,7 @@
};
};
- sata6: ahci at 00410000 {
+ sata6: ahci at 410000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00410000 0x1000>;
reg-names = "ahci";
@@ -232,7 +232,7 @@
};
};
- sata_phy6: sata_phy at 00412100 {
+ sata_phy6: sata_phy at 412100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00412100 0x1000>;
reg-names = "phy";
@@ -246,7 +246,7 @@
};
};
- sata7: ahci at 00420000 {
+ sata7: ahci at 420000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00420000 0x1000>;
reg-names = "ahci";
@@ -262,7 +262,7 @@
};
};
- sata_phy7: sata_phy at 00422100 {
+ sata_phy7: sata_phy at 422100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00422100 0x1000>;
reg-names = "phy";
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index e6f75c633623..99aaff0b6d72 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -42,7 +42,7 @@
#address-cells = <2>;
#size-cells = <0>;
- cpu at 000 {
+ cpu at 0 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x0 0x0>;
@@ -50,7 +50,7 @@
next-level-cache = <&CLUSTER0_L2>;
};
- cpu at 001 {
+ cpu at 1 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x0 0x1>;
@@ -106,7 +106,7 @@
next-level-cache = <&CLUSTER3_L2>;
};
- CLUSTER0_L2: l2-cache at 000 {
+ CLUSTER0_L2: l2-cache at 0 {
compatible = "cache";
};
@@ -152,13 +152,13 @@
#size-cells = <1>;
ranges = <0x0 0x0 0x61000000 0x05000000>;
- ccn: ccn at 00000000 {
+ ccn: ccn at 0 {
compatible = "arm,ccn-502";
reg = <0x00000000 0x900000>;
interrupts = <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>;
};
- gic: interrupt-controller at 02c00000 {
+ gic: interrupt-controller at 2c00000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
#address-cells = <1>;
@@ -177,7 +177,7 @@
};
};
- smmu: mmu at 03000000 {
+ smmu: mmu at 3000000 {
compatible = "arm,mmu-500";
reg = <0x03000000 0x80000>;
#global-interrupts = <1>;
@@ -258,7 +258,7 @@
#include "stingray-clock.dtsi"
- gpio_crmu: gpio at 00024800 {
+ gpio_crmu: gpio at 24800 {
compatible = "brcm,iproc-gpio";
reg = <0x00024800 0x4c>;
ngpios = <6>;
@@ -278,7 +278,7 @@
#include "stingray-pinctrl.dtsi"
- mdio_mux_iproc: mdio-mux at 0002023c {
+ mdio_mux_iproc: mdio-mux at 2023c {
compatible = "brcm,mdio-mux-iproc";
reg = <0x0002023c 0x14>;
#address-cells = <1>;
@@ -309,7 +309,7 @@
};
};
- pwm: pwm at 00010000 {
+ pwm: pwm at 10000 {
compatible = "brcm,iproc-pwm";
reg = <0x00010000 0x1000>;
clocks = <&crmu_ref25m>;
@@ -317,7 +317,7 @@
status = "disabled";
};
- timer0: timer at 00030000 {
+ timer0: timer at 30000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00030000 0x1000>;
interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
@@ -328,7 +328,7 @@
status = "disabled";
};
- timer1: timer at 00040000 {
+ timer1: timer at 40000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00040000 0x1000>;
interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
@@ -338,7 +338,7 @@
clock-names = "timer1", "timer2", "apb_pclk";
};
- timer2: timer at 00050000 {
+ timer2: timer at 50000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00050000 0x1000>;
interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
@@ -349,7 +349,7 @@
status = "disabled";
};
- timer3: timer at 00060000 {
+ timer3: timer at 60000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00060000 0x1000>;
interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
@@ -360,7 +360,7 @@
status = "disabled";
};
- timer4: timer at 00070000 {
+ timer4: timer at 70000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00070000 0x1000>;
interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
@@ -371,7 +371,7 @@
status = "disabled";
};
- timer5: timer at 00080000 {
+ timer5: timer at 80000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00080000 0x1000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
@@ -382,7 +382,7 @@
status = "disabled";
};
- timer6: timer at 00090000 {
+ timer6: timer at 90000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00090000 0x1000>;
interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
@@ -393,7 +393,7 @@
status = "disabled";
};
- timer7: timer at 000a0000 {
+ timer7: timer at a0000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x000a0000 0x1000>;
interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
@@ -404,7 +404,7 @@
status = "disabled";
};
- i2c0: i2c at 000b0000 {
+ i2c0: i2c at b0000 {
compatible = "brcm,iproc-i2c";
reg = <0x000b0000 0x100>;
#address-cells = <1>;
@@ -414,7 +414,7 @@
status = "disabled";
};
- wdt0: watchdog at 000c0000 {
+ wdt0: watchdog at c0000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x000c0000 0x1000>;
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
@@ -422,7 +422,7 @@
clock-names = "wdogclk", "apb_pclk";
};
- gpio_hsls: gpio at 000d0000 {
+ gpio_hsls: gpio at d0000 {
compatible = "brcm,iproc-gpio";
reg = <0x000d0000 0x864>;
ngpios = <151>;
@@ -448,7 +448,7 @@
<&pinmux 151 91 4>;
};
- i2c1: i2c at 000e0000 {
+ i2c1: i2c at e0000 {
compatible = "brcm,iproc-i2c";
reg = <0x000e0000 0x100>;
#address-cells = <1>;
@@ -458,7 +458,7 @@
status = "disabled";
};
- uart0: uart at 00100000 {
+ uart0: uart at 100000 {
device_type = "serial";
compatible = "snps,dw-apb-uart";
reg = <0x00100000 0x1000>;
@@ -469,7 +469,7 @@
status = "disabled";
};
- uart1: uart at 00110000 {
+ uart1: uart at 110000 {
device_type = "serial";
compatible = "snps,dw-apb-uart";
reg = <0x00110000 0x1000>;
@@ -480,7 +480,7 @@
status = "disabled";
};
- uart2: uart at 00120000 {
+ uart2: uart at 120000 {
device_type = "serial";
compatible = "snps,dw-apb-uart";
reg = <0x00120000 0x1000>;
@@ -491,7 +491,7 @@
status = "disabled";
};
- uart3: uart at 00130000 {
+ uart3: uart at 130000 {
device_type = "serial";
compatible = "snps,dw-apb-uart";
reg = <0x00130000 0x1000>;
@@ -502,7 +502,7 @@
status = "disabled";
};
- ssp0: ssp at 00180000 {
+ ssp0: ssp at 180000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x00180000 0x1000>;
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
@@ -514,7 +514,7 @@
status = "disabled";
};
- ssp1: ssp at 00190000 {
+ ssp1: ssp at 190000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x00190000 0x1000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
@@ -526,12 +526,12 @@
status = "disabled";
};
- hwrng: hwrng at 00220000 {
+ hwrng: hwrng at 220000 {
compatible = "brcm,iproc-rng200";
reg = <0x00220000 0x28>;
};
- dma0: dma at 00310000 {
+ dma0: dma at 310000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x00310000 0x1000>;
interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
@@ -551,7 +551,7 @@
iommus = <&smmu 0x6000 0x0000>;
};
- enet: ethernet at 00340000{
+ enet: ethernet at 340000{
compatible = "brcm,amac";
reg = <0x00340000 0x1000>;
reg-names = "amac_base";
@@ -560,7 +560,7 @@
status= "disabled";
};
- nand: nand at 00360000 {
+ nand: nand at 360000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
reg = <0x00360000 0x600>,
<0x0050a408 0x600>,
@@ -573,7 +573,7 @@
status = "disabled";
};
- sdio0: sdhci at 003f1000 {
+ sdio0: sdhci at 3f1000 {
compatible = "brcm,sdhci-iproc";
reg = <0x003f1000 0x100>;
interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
@@ -583,7 +583,7 @@
status = "disabled";
};
- sdio1: sdhci at 003f2000 {
+ sdio1: sdhci at 3f2000 {
compatible = "brcm,sdhci-iproc";
reg = <0x003f2000 0x100>;
interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/cavium/thunder-88xx.dts b/arch/arm64/boot/dts/cavium/thunder-88xx.dts
index 800ba65991f7..5ec2bfa5f714 100644
--- a/arch/arm64/boot/dts/cavium/thunder-88xx.dts
+++ b/arch/arm64/boot/dts/cavium/thunder-88xx.dts
@@ -60,7 +60,7 @@
serial1 = &uaa1;
};
- memory at 00000000 {
+ memory at 0 {
device_type = "memory";
reg = <0x0 0x00000000 0x0 0x80000000>;
};
diff --git a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
index 04dc8a8d1539..1a9103b269cb 100644
--- a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
+++ b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
@@ -62,97 +62,97 @@
#address-cells = <2>;
#size-cells = <0>;
- cpu at 000 {
+ cpu at 0 {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x000>;
enable-method = "psci";
};
- cpu at 001 {
+ cpu at 1 {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x001>;
enable-method = "psci";
};
- cpu at 002 {
+ cpu at 2 {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x002>;
enable-method = "psci";
};
- cpu at 003 {
+ cpu at 3 {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x003>;
enable-method = "psci";
};
- cpu at 004 {
+ cpu at 4 {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x004>;
enable-method = "psci";
};
- cpu at 005 {
+ cpu at 5 {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x005>;
enable-method = "psci";
};
- cpu at 006 {
+ cpu at 6 {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x006>;
enable-method = "psci";
};
- cpu at 007 {
+ cpu at 7 {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x007>;
enable-method = "psci";
};
- cpu at 008 {
+ cpu at 8 {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x008>;
enable-method = "psci";
};
- cpu at 009 {
+ cpu at 9 {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x009>;
enable-method = "psci";
};
- cpu at 00a {
+ cpu at a {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x00a>;
enable-method = "psci";
};
- cpu at 00b {
+ cpu at b {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x00b>;
enable-method = "psci";
};
- cpu at 00c {
+ cpu at c {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x00c>;
enable-method = "psci";
};
- cpu at 00d {
+ cpu at d {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x00d>;
enable-method = "psci";
};
- cpu at 00e {
+ cpu at e {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x00e>;
enable-method = "psci";
};
- cpu at 00f {
+ cpu at f {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x00f>;
diff --git a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
index abba750b87f8..3bbd017f088f 100644
--- a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
+++ b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
@@ -18,7 +18,7 @@
model = "Hisilicon Hip05 D02 Development Board";
compatible = "hisilicon,hip05-d02";
- memory at 00000000 {
+ memory at 0 {
device_type = "memory";
reg = <0x0 0x00000000 0x0 0x80000000>;
};
diff --git a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
index 7c4114a67753..9af633021a42 100644
--- a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
+++ b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
@@ -17,7 +17,7 @@
model = "Hisilicon Hip06 D03 Development Board";
compatible = "hisilicon,hip06-d03";
- memory at 00000000 {
+ memory at 0 {
device_type = "memory";
reg = <0x0 0x00000000 0x0 0x40000000>;
};
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
index 9c3bdf87e543..8f79e8dae102 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -56,7 +56,7 @@
stdout-path = "serial0:115200n8";
};
- memory at 00000000 {
+ memory at 0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index 0d7b2ae46610..46ec003eabb0 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -56,7 +56,7 @@
stdout-path = "serial0:115200n8";
};
- memory at 00000000 {
+ memory at 0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
index acf5c7d16d79..4fbb13d41451 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
@@ -57,7 +57,7 @@
stdout-path = "serial0:115200n8";
};
- memory at 00000000 {
+ memory at 0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
diff --git a/arch/arm64/boot/dts/marvell/armada-8080-db.dts b/arch/arm64/boot/dts/marvell/armada-8080-db.dts
index 707af833832b..85b58a19a9fb 100644
--- a/arch/arm64/boot/dts/marvell/armada-8080-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8080-db.dts
@@ -55,7 +55,7 @@
stdout-path = "serial0:115200n8";
};
- memory at 00000000 {
+ memory at 0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
index 95a1ff60f6c1..b98ea137371d 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
@@ -54,13 +54,13 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu at 000 {
+ cpu at 0 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x000>;
enable-method = "psci";
};
- cpu at 001 {
+ cpu at 1 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x001>;
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
index ba43a4357b89..116164ff260f 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
@@ -54,13 +54,13 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu at 000 {
+ cpu at 0 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x000>;
enable-method = "psci";
};
- cpu at 001 {
+ cpu at 1 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x001>;
diff --git a/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi
index bf1b22b70384..7f0661e12f5e 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi
@@ -52,13 +52,13 @@
#size-cells = <0>;
compatible = "marvell,armada-ap810-octa";
- cpu at 000 {
+ cpu at 0 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x000>;
enable-method = "psci";
};
- cpu at 001 {
+ cpu at 1 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x001>;
diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
index d6b800fd26d0..d2f88b92d8e2 100644
--- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
+++ b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
@@ -167,7 +167,7 @@
ranges = <0 0xe80000 0x10000>;
interrupt-parent = <&aic>;
- gpio0: gpio at 0400 {
+ gpio0: gpio at 400 {
compatible = "snps,dw-apb-gpio";
reg = <0x0400 0x400>;
#address-cells = <1>;
@@ -185,7 +185,7 @@
};
};
- gpio1: gpio at 0800 {
+ gpio1: gpio at 800 {
compatible = "snps,dw-apb-gpio";
reg = <0x0800 0x400>;
#address-cells = <1>;
@@ -203,7 +203,7 @@
};
};
- gpio2: gpio at 0c00 {
+ gpio2: gpio at c00 {
compatible = "snps,dw-apb-gpio";
reg = <0x0c00 0x400>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 1d63e6b879de..d294b3de3125 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -192,7 +192,7 @@
};
};
- sdhci at 07824000 {
+ sdhci at 7824000 {
vmmc-supply = <&pm8916_l8>;
vqmmc-supply = <&pm8916_l5>;
@@ -202,7 +202,7 @@
status = "okay";
};
- sdhci at 07864000 {
+ sdhci at 7864000 {
vmmc-supply = <&pm8916_l11>;
vqmmc-supply = <&pm8916_l12>;
@@ -232,7 +232,7 @@
};
};
- lpass at 07708000 {
+ lpass at 7708000 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index 789f3e87321e..b8dbb203b664 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -51,31 +51,31 @@
pinctrl-1 = <&blsp2_uart2_4pins_sleep>;
};
- i2c at 07577000 {
+ i2c at 7577000 {
/* On Low speed expansion */
label = "LS-I2C0";
status = "okay";
};
- i2c at 075b6000 {
+ i2c at 75b6000 {
/* On Low speed expansion */
label = "LS-I2C1";
status = "okay";
};
- spi at 07575000 {
+ spi at 7575000 {
/* On Low speed expansion */
label = "LS-SPI0";
status = "okay";
};
- i2c at 075b5000 {
+ i2c at 75b5000 {
/* On High speed expansion */
label = "HS-I2C2";
status = "okay";
};
- spi at 075ba000{
+ spi at 75ba000{
/* On High speed expansion */
label = "HS-SPI1";
status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index dc3817593e14..2c4159480be2 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -495,7 +495,7 @@
status = "disabled";
};
- lpass: lpass at 07708000 {
+ lpass: lpass at 7708000 {
status = "disabled";
compatible = "qcom,lpass-cpu-apq8016";
clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
@@ -530,7 +530,7 @@
#sound-dai-cells = <1>;
};
- sdhc_1: sdhci at 07824000 {
+ sdhc_1: sdhci at 7824000 {
compatible = "qcom,sdhci-msm-v4";
reg = <0x07824900 0x11c>, <0x07824000 0x800>;
reg-names = "hc_mem", "core_mem";
@@ -547,7 +547,7 @@
status = "disabled";
};
- sdhc_2: sdhci at 07864000 {
+ sdhc_2: sdhci at 7864000 {
compatible = "qcom,sdhci-msm-v4";
reg = <0x07864900 0x11c>, <0x07864000 0x800>;
reg-names = "hc_mem", "core_mem";
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 887b61c872dd..b138414c248a 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -395,7 +395,7 @@
#clock-cells = <1>;
};
- blsp1_spi0: spi at 07575000 {
+ blsp1_spi0: spi at 7575000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x07575000 0x600>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
@@ -410,7 +410,7 @@
status = "disabled";
};
- blsp2_i2c0: i2c at 075b5000 {
+ blsp2_i2c0: i2c at 75b5000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x075b5000 0x1000>;
interrupts = <GIC_SPI 101 0>;
@@ -441,7 +441,7 @@
status = "disabled";
};
- blsp2_i2c1: i2c at 075b6000 {
+ blsp2_i2c1: i2c at 75b6000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x075b6000 0x1000>;
interrupts = <GIC_SPI 102 0>;
@@ -466,7 +466,7 @@
status = "disabled";
};
- blsp1_i2c2: i2c at 07577000 {
+ blsp1_i2c2: i2c at 7577000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x07577000 0x1000>;
interrupts = <GIC_SPI 97 0>;
@@ -481,7 +481,7 @@
status = "disabled";
};
- blsp2_spi5: spi at 075ba000{
+ blsp2_spi5: spi at 75ba000{
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x075ba000 0x600>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
@@ -522,7 +522,7 @@
#interrupt-cells = <2>;
};
- timer at 09840000 {
+ timer at 9840000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: arm-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH 2/2] arm64: dts: fix unit-address leading 0s
Date: Fri, 13 Oct 2017 12:54:52 -0500 [thread overview]
Message-ID: <20171013175452.1198-2-robh@kernel.org> (raw)
In-Reply-To: <20171013175452.1198-1-robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Fix dtc warnings for 'simple_bus_reg' due to leading 0s. Converted using
the following command:
perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find arch/arm64/boot/dts -type -f -name '*.dts*'
Signed-off-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 16 +++---
arch/arm64/boot/dts/apm/apm-shadowcat.dtsi | 6 +-
arch/arm64/boot/dts/apm/apm-storm.dtsi | 4 +-
arch/arm64/boot/dts/arm/foundation-v8.dtsi | 14 ++---
arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts | 2 +-
arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi | 24 ++++----
.../boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts | 2 +-
.../arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts | 2 +-
arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi | 4 +-
.../boot/dts/broadcom/stingray/stingray-clock.dtsi | 12 ++--
.../boot/dts/broadcom/stingray/stingray-fs4.dtsi | 4 +-
.../dts/broadcom/stingray/stingray-pinctrl.dtsi | 4 +-
.../boot/dts/broadcom/stingray/stingray-sata.dtsi | 32 +++++------
.../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 66 +++++++++++-----------
arch/arm64/boot/dts/cavium/thunder-88xx.dts | 2 +-
arch/arm64/boot/dts/cavium/thunder-88xx.dtsi | 32 +++++------
arch/arm64/boot/dts/hisilicon/hip05-d02.dts | 2 +-
arch/arm64/boot/dts/hisilicon/hip06-d03.dts | 2 +-
arch/arm64/boot/dts/marvell/armada-7040-db.dts | 2 +-
arch/arm64/boot/dts/marvell/armada-8040-db.dts | 2 +-
arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 2 +-
arch/arm64/boot/dts/marvell/armada-8080-db.dts | 2 +-
arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi | 4 +-
arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi | 4 +-
.../dts/marvell/armada-ap810-ap0-octa-core.dtsi | 4 +-
arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 6 +-
arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 6 +-
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 10 ++--
arch/arm64/boot/dts/qcom/msm8916.dtsi | 6 +-
arch/arm64/boot/dts/qcom/msm8996.dtsi | 12 ++--
30 files changed, 145 insertions(+), 145 deletions(-)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 8c8db1b057df..0daad839f92c 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -178,7 +178,7 @@
#size-cells = <0>;
};
- usb_otg: usb@01c19000 {
+ usb_otg: usb@1c19000 {
compatible = "allwinner,sun8i-a33-musb";
reg = <0x01c19000 0x0400>;
clocks = <&ccu CLK_BUS_OTG>;
@@ -191,7 +191,7 @@
status = "disabled";
};
- usbphy: phy@01c19400 {
+ usbphy: phy@1c19400 {
compatible = "allwinner,sun50i-a64-usb-phy";
reg = <0x01c19400 0x14>,
<0x01c1a800 0x4>,
@@ -211,7 +211,7 @@
#phy-cells = <1>;
};
- ehci0: usb@01c1a000 {
+ ehci0: usb@1c1a000 {
compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
reg = <0x01c1a000 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
@@ -223,7 +223,7 @@
status = "disabled";
};
- ohci0: usb@01c1a400 {
+ ohci0: usb@1c1a400 {
compatible = "allwinner,sun50i-a64-ohci", "generic-ohci";
reg = <0x01c1a400 0x100>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
@@ -233,7 +233,7 @@
status = "disabled";
};
- ehci1: usb@01c1b000 {
+ ehci1: usb@1c1b000 {
compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
reg = <0x01c1b000 0x100>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
@@ -247,7 +247,7 @@
status = "disabled";
};
- ohci1: usb@01c1b400 {
+ ohci1: usb@1c1b400 {
compatible = "allwinner,sun50i-a64-ohci", "generic-ohci";
reg = <0x01c1b400 0x100>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
@@ -259,7 +259,7 @@
status = "disabled";
};
- ccu: clock@01c20000 {
+ ccu: clock@1c20000 {
compatible = "allwinner,sun50i-a64-ccu";
reg = <0x01c20000 0x400>;
clocks = <&osc24M>, <&osc32k>;
@@ -486,7 +486,7 @@
#reset-cells = <1>;
};
- r_pio: pinctrl@01f02c00 {
+ r_pio: pinctrl@1f02c00 {
compatible = "allwinner,sun50i-a64-r-pinctrl";
reg = <0x01f02c00 0x400>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
index c9ffffb96e43..d8ecd1661461 100644
--- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
@@ -19,7 +19,7 @@
#address-cells = <2>;
#size-cells = <0>;
- cpu@000 {
+ cpu@0 {
device_type = "cpu";
compatible = "apm,strega", "arm,armv8";
reg = <0x0 0x000>;
@@ -29,7 +29,7 @@
#clock-cells = <1>;
clocks = <&pmd0clk 0>;
};
- cpu@001 {
+ cpu@1 {
device_type = "cpu";
compatible = "apm,strega", "arm,armv8";
reg = <0x0 0x001>;
@@ -125,7 +125,7 @@
<0x0 0x780a0000 0x0 0x20000>, /* GIC CPU */
<0x0 0x780c0000 0x0 0x10000>, /* GIC VCPU Control */
<0x0 0x780e0000 0x0 0x20000>; /* GIC VCPU */
- v2m0: v2m@00000 {
+ v2m0: v2m@0 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x0 0x0 0x0 0x1000>;
diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi
index c09a36fed917..00e82b8e9a19 100644
--- a/arch/arm64/boot/dts/apm/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi
@@ -19,7 +19,7 @@
#address-cells = <2>;
#size-cells = <0>;
- cpu@000 {
+ cpu@0 {
device_type = "cpu";
compatible = "apm,potenza", "arm,armv8";
reg = <0x0 0x000>;
@@ -27,7 +27,7 @@
cpu-release-addr = <0x1 0x0000fff8>;
next-level-cache = <&xgene_L2_0>;
};
- cpu@001 {
+ cpu@1 {
device_type = "cpu";
compatible = "apm,potenza", "arm,armv8";
reg = <0x0 0x001>;
diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dtsi b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
index 8ecdd4331980..21a7a575f02c 100644
--- a/arch/arm64/boot/dts/arm/foundation-v8.dtsi
+++ b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
@@ -97,7 +97,7 @@
timeout-sec = <30>;
};
- smb@08000000 {
+ smb@8000000 {
compatible = "arm,vexpress,v2m-p1", "simple-bus";
arm,v2m-memory-map = "rs1";
#address-cells = <2>; /* SMB chipselect number and offset */
@@ -189,12 +189,12 @@
#size-cells = <1>;
ranges = <0 3 0 0x200000>;
- v2m_sysreg: sysreg@010000 {
+ v2m_sysreg: sysreg@10000 {
compatible = "arm,vexpress-sysreg";
reg = <0x010000 0x1000>;
};
- v2m_serial0: uart@090000 {
+ v2m_serial0: uart@90000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x090000 0x1000>;
interrupts = <5>;
@@ -202,7 +202,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial1: uart@0a0000 {
+ v2m_serial1: uart@a0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0a0000 0x1000>;
interrupts = <6>;
@@ -210,7 +210,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial2: uart@0b0000 {
+ v2m_serial2: uart@b0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0b0000 0x1000>;
interrupts = <7>;
@@ -218,7 +218,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial3: uart@0c0000 {
+ v2m_serial3: uart@c0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0c0000 0x1000>;
interrupts = <8>;
@@ -226,7 +226,7 @@
clock-names = "uartclk", "apb_pclk";
};
- virtio-block@0130000 {
+ virtio-block@130000 {
compatible = "virtio,mmio";
reg = <0x130000 0x200>;
interrupts = <42>;
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
index a83ed2c6bbf7..a1b73f46b625 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
@@ -104,7 +104,7 @@
<0 63 4>;
};
- smb@08000000 {
+ smb@8000000 {
compatible = "simple-bus";
#address-cells = <2>;
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
index 528875c75598..6cadb779729d 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
@@ -60,14 +60,14 @@
#size-cells = <1>;
ranges = <0 3 0 0x200000>;
- v2m_sysreg: sysreg@010000 {
+ v2m_sysreg: sysreg@10000 {
compatible = "arm,vexpress-sysreg";
reg = <0x010000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
};
- v2m_sysctl: sysctl@020000 {
+ v2m_sysctl: sysctl@20000 {
compatible = "arm,sp810", "arm,primecell";
reg = <0x020000 0x1000>;
clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>;
@@ -78,7 +78,7 @@
assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
};
- aaci@040000 {
+ aaci@40000 {
compatible = "arm,pl041", "arm,primecell";
reg = <0x040000 0x1000>;
interrupts = <11>;
@@ -86,7 +86,7 @@
clock-names = "apb_pclk";
};
- mmci@050000 {
+ mmci@50000 {
compatible = "arm,pl180", "arm,primecell";
reg = <0x050000 0x1000>;
interrupts = <9 10>;
@@ -98,7 +98,7 @@
clock-names = "mclk", "apb_pclk";
};
- kmi@060000 {
+ kmi@60000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x060000 0x1000>;
interrupts = <12>;
@@ -106,7 +106,7 @@
clock-names = "KMIREFCLK", "apb_pclk";
};
- kmi@070000 {
+ kmi@70000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x070000 0x1000>;
interrupts = <13>;
@@ -114,7 +114,7 @@
clock-names = "KMIREFCLK", "apb_pclk";
};
- v2m_serial0: uart@090000 {
+ v2m_serial0: uart@90000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x090000 0x1000>;
interrupts = <5>;
@@ -122,7 +122,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial1: uart@0a0000 {
+ v2m_serial1: uart@a0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0a0000 0x1000>;
interrupts = <6>;
@@ -130,7 +130,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial2: uart@0b0000 {
+ v2m_serial2: uart@b0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0b0000 0x1000>;
interrupts = <7>;
@@ -138,7 +138,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial3: uart@0c0000 {
+ v2m_serial3: uart@c0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0c0000 0x1000>;
interrupts = <8>;
@@ -146,7 +146,7 @@
clock-names = "uartclk", "apb_pclk";
};
- wdt@0f0000 {
+ wdt@f0000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0f0000 0x1000>;
interrupts = <0>;
@@ -219,7 +219,7 @@
};
};
- virtio-block@0130000 {
+ virtio-block@130000 {
compatible = "virtio,mmio";
reg = <0x130000 0x200>;
interrupts = <42>;
diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
index e3a171162bb4..124dceeada1f 100644
--- a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
+++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
@@ -128,7 +128,7 @@
};
};
- smb@08000000 {
+ smb@8000000 {
compatible = "simple-bus";
#address-cells = <2>;
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts
index ab4ae1a32fab..f00c21e0767e 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts
@@ -114,7 +114,7 @@
reg = <0x04000000 0x06400000>; /* 100MB */
};
- partition@0a400000{
+ partition@a400000{
label = "ncustfs";
reg = <0x0a400000 0x35c00000>; /* 860MB */
};
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
index 35c8457e3d1f..4a2a6af8e752 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
@@ -77,7 +77,7 @@
next-level-cache = <&CLUSTER0_L2>;
};
- CLUSTER0_L2: l2-cache@000 {
+ CLUSTER0_L2: l2-cache@0 {
compatible = "cache";
};
};
@@ -367,7 +367,7 @@
#size-cells = <1>;
ranges = <0 0x652e0000 0x80000>;
- v2m0: v2m@00000 {
+ v2m0: v2m@0 {
compatible = "arm,gic-v2m-frame";
interrupt-parent = <&gic>;
msi-controller;
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
index cbc43376e25e..3a4d4524b5ed 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
@@ -46,7 +46,7 @@
clock-mult = <1>;
};
- genpll0: genpll0@0001d104 {
+ genpll0: genpll0@1d104 {
#clock-cells = <1>;
compatible = "brcm,sr-genpll0";
reg = <0x0001d104 0x32>,
@@ -58,7 +58,7 @@
"clk_paxc_axi";
};
- genpll3: genpll3@0001d1e0 {
+ genpll3: genpll3@1d1e0 {
#clock-cells = <1>;
compatible = "brcm,sr-genpll3";
reg = <0x0001d1e0 0x32>,
@@ -68,7 +68,7 @@
"clk_sdio";
};
- genpll4: genpll4@0001d214 {
+ genpll4: genpll4@1d214 {
#clock-cells = <1>;
compatible = "brcm,sr-genpll4";
reg = <0x0001d214 0x32>,
@@ -80,7 +80,7 @@
"clk_bridge_fscpu";
};
- genpll5: genpll5@0001d248 {
+ genpll5: genpll5@1d248 {
#clock-cells = <1>;
compatible = "brcm,sr-genpll5";
reg = <0x0001d248 0x32>,
@@ -90,7 +90,7 @@
"crypto_ae_clk", "raid_ae_clk";
};
- lcpll0: lcpll0@0001d0c4 {
+ lcpll0: lcpll0@1d0c4 {
#clock-cells = <1>;
compatible = "brcm,sr-lcpll0";
reg = <0x0001d0c4 0x3c>,
@@ -101,7 +101,7 @@
"clk_sata_500";
};
- lcpll1: lcpll1@0001d138 {
+ lcpll1: lcpll1@1d138 {
#clock-cells = <1>;
compatible = "brcm,sr-lcpll1";
reg = <0x0001d138 0x3c>,
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi
index 8bf1dc6b46ca..9666969c8c88 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi
@@ -36,7 +36,7 @@
#size-cells = <1>;
ranges = <0x0 0x0 0x67000000 0x00800000>;
- crypto_mbox: crypto_mbox@00000000 {
+ crypto_mbox: crypto_mbox@0 {
compatible = "brcm,iproc-flexrm-mbox";
reg = <0x00000000 0x200000>;
msi-parent = <&gic_its 0x4100>;
@@ -44,7 +44,7 @@
dma-coherent;
};
- raid_mbox: raid_mbox@00400000 {
+ raid_mbox: raid_mbox@400000 {
compatible = "brcm,iproc-flexrm-mbox";
reg = <0x00400000 0x200000>;
dma-coherent;
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
index 15214d05fec1..8a3a770e8f2c 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
@@ -32,7 +32,7 @@
#include <dt-bindings/pinctrl/brcm,pinctrl-stingray.h>
- pinconf: pinconf@00140000 {
+ pinconf: pinconf@140000 {
compatible = "pinconf-single";
reg = <0x00140000 0x250>;
pinctrl-single,register-width = <32>;
@@ -40,7 +40,7 @@
/* pinconf functions */
};
- pinmux: pinmux@0014029c {
+ pinmux: pinmux@14029c {
compatible = "pinctrl-single";
reg = <0x0014029c 0x250>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
index a774709388df..4b5465da81d8 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
@@ -36,7 +36,7 @@
#size-cells = <1>;
ranges = <0x0 0x0 0x67d00000 0x00800000>;
- sata0: ahci@00210000 {
+ sata0: ahci@210000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00210000 0x1000>;
reg-names = "ahci";
@@ -52,7 +52,7 @@
};
};
- sata_phy0: sata_phy@00212100 {
+ sata_phy0: sata_phy@212100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00212100 0x1000>;
reg-names = "phy";
@@ -66,7 +66,7 @@
};
};
- sata1: ahci@00310000 {
+ sata1: ahci@310000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00310000 0x1000>;
reg-names = "ahci";
@@ -82,7 +82,7 @@
};
};
- sata_phy1: sata_phy@00312100 {
+ sata_phy1: sata_phy@312100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00312100 0x1000>;
reg-names = "phy";
@@ -96,7 +96,7 @@
};
};
- sata2: ahci@00120000 {
+ sata2: ahci@120000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00120000 0x1000>;
reg-names = "ahci";
@@ -112,7 +112,7 @@
};
};
- sata_phy2: sata_phy@00122100 {
+ sata_phy2: sata_phy@122100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00122100 0x1000>;
reg-names = "phy";
@@ -126,7 +126,7 @@
};
};
- sata3: ahci@00130000 {
+ sata3: ahci@130000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00130000 0x1000>;
reg-names = "ahci";
@@ -142,7 +142,7 @@
};
};
- sata_phy3: sata_phy@00132100 {
+ sata_phy3: sata_phy@132100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00132100 0x1000>;
reg-names = "phy";
@@ -156,7 +156,7 @@
};
};
- sata4: ahci@00330000 {
+ sata4: ahci@330000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00330000 0x1000>;
reg-names = "ahci";
@@ -172,7 +172,7 @@
};
};
- sata_phy4: sata_phy@00332100 {
+ sata_phy4: sata_phy@332100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00332100 0x1000>;
reg-names = "phy";
@@ -186,7 +186,7 @@
};
};
- sata5: ahci@00400000 {
+ sata5: ahci@400000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00400000 0x1000>;
reg-names = "ahci";
@@ -202,7 +202,7 @@
};
};
- sata_phy5: sata_phy@00402100 {
+ sata_phy5: sata_phy@402100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00402100 0x1000>;
reg-names = "phy";
@@ -216,7 +216,7 @@
};
};
- sata6: ahci@00410000 {
+ sata6: ahci@410000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00410000 0x1000>;
reg-names = "ahci";
@@ -232,7 +232,7 @@
};
};
- sata_phy6: sata_phy@00412100 {
+ sata_phy6: sata_phy@412100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00412100 0x1000>;
reg-names = "phy";
@@ -246,7 +246,7 @@
};
};
- sata7: ahci@00420000 {
+ sata7: ahci@420000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00420000 0x1000>;
reg-names = "ahci";
@@ -262,7 +262,7 @@
};
};
- sata_phy7: sata_phy@00422100 {
+ sata_phy7: sata_phy@422100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00422100 0x1000>;
reg-names = "phy";
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index e6f75c633623..99aaff0b6d72 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -42,7 +42,7 @@
#address-cells = <2>;
#size-cells = <0>;
- cpu@000 {
+ cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x0 0x0>;
@@ -50,7 +50,7 @@
next-level-cache = <&CLUSTER0_L2>;
};
- cpu@001 {
+ cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x0 0x1>;
@@ -106,7 +106,7 @@
next-level-cache = <&CLUSTER3_L2>;
};
- CLUSTER0_L2: l2-cache@000 {
+ CLUSTER0_L2: l2-cache@0 {
compatible = "cache";
};
@@ -152,13 +152,13 @@
#size-cells = <1>;
ranges = <0x0 0x0 0x61000000 0x05000000>;
- ccn: ccn@00000000 {
+ ccn: ccn@0 {
compatible = "arm,ccn-502";
reg = <0x00000000 0x900000>;
interrupts = <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>;
};
- gic: interrupt-controller@02c00000 {
+ gic: interrupt-controller@2c00000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
#address-cells = <1>;
@@ -177,7 +177,7 @@
};
};
- smmu: mmu@03000000 {
+ smmu: mmu@3000000 {
compatible = "arm,mmu-500";
reg = <0x03000000 0x80000>;
#global-interrupts = <1>;
@@ -258,7 +258,7 @@
#include "stingray-clock.dtsi"
- gpio_crmu: gpio@00024800 {
+ gpio_crmu: gpio@24800 {
compatible = "brcm,iproc-gpio";
reg = <0x00024800 0x4c>;
ngpios = <6>;
@@ -278,7 +278,7 @@
#include "stingray-pinctrl.dtsi"
- mdio_mux_iproc: mdio-mux@0002023c {
+ mdio_mux_iproc: mdio-mux@2023c {
compatible = "brcm,mdio-mux-iproc";
reg = <0x0002023c 0x14>;
#address-cells = <1>;
@@ -309,7 +309,7 @@
};
};
- pwm: pwm@00010000 {
+ pwm: pwm@10000 {
compatible = "brcm,iproc-pwm";
reg = <0x00010000 0x1000>;
clocks = <&crmu_ref25m>;
@@ -317,7 +317,7 @@
status = "disabled";
};
- timer0: timer@00030000 {
+ timer0: timer@30000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00030000 0x1000>;
interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
@@ -328,7 +328,7 @@
status = "disabled";
};
- timer1: timer@00040000 {
+ timer1: timer@40000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00040000 0x1000>;
interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
@@ -338,7 +338,7 @@
clock-names = "timer1", "timer2", "apb_pclk";
};
- timer2: timer@00050000 {
+ timer2: timer@50000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00050000 0x1000>;
interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
@@ -349,7 +349,7 @@
status = "disabled";
};
- timer3: timer@00060000 {
+ timer3: timer@60000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00060000 0x1000>;
interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
@@ -360,7 +360,7 @@
status = "disabled";
};
- timer4: timer@00070000 {
+ timer4: timer@70000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00070000 0x1000>;
interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
@@ -371,7 +371,7 @@
status = "disabled";
};
- timer5: timer@00080000 {
+ timer5: timer@80000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00080000 0x1000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
@@ -382,7 +382,7 @@
status = "disabled";
};
- timer6: timer@00090000 {
+ timer6: timer@90000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00090000 0x1000>;
interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
@@ -393,7 +393,7 @@
status = "disabled";
};
- timer7: timer@000a0000 {
+ timer7: timer@a0000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x000a0000 0x1000>;
interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
@@ -404,7 +404,7 @@
status = "disabled";
};
- i2c0: i2c@000b0000 {
+ i2c0: i2c@b0000 {
compatible = "brcm,iproc-i2c";
reg = <0x000b0000 0x100>;
#address-cells = <1>;
@@ -414,7 +414,7 @@
status = "disabled";
};
- wdt0: watchdog@000c0000 {
+ wdt0: watchdog@c0000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x000c0000 0x1000>;
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
@@ -422,7 +422,7 @@
clock-names = "wdogclk", "apb_pclk";
};
- gpio_hsls: gpio@000d0000 {
+ gpio_hsls: gpio@d0000 {
compatible = "brcm,iproc-gpio";
reg = <0x000d0000 0x864>;
ngpios = <151>;
@@ -448,7 +448,7 @@
<&pinmux 151 91 4>;
};
- i2c1: i2c@000e0000 {
+ i2c1: i2c@e0000 {
compatible = "brcm,iproc-i2c";
reg = <0x000e0000 0x100>;
#address-cells = <1>;
@@ -458,7 +458,7 @@
status = "disabled";
};
- uart0: uart@00100000 {
+ uart0: uart@100000 {
device_type = "serial";
compatible = "snps,dw-apb-uart";
reg = <0x00100000 0x1000>;
@@ -469,7 +469,7 @@
status = "disabled";
};
- uart1: uart@00110000 {
+ uart1: uart@110000 {
device_type = "serial";
compatible = "snps,dw-apb-uart";
reg = <0x00110000 0x1000>;
@@ -480,7 +480,7 @@
status = "disabled";
};
- uart2: uart@00120000 {
+ uart2: uart@120000 {
device_type = "serial";
compatible = "snps,dw-apb-uart";
reg = <0x00120000 0x1000>;
@@ -491,7 +491,7 @@
status = "disabled";
};
- uart3: uart@00130000 {
+ uart3: uart@130000 {
device_type = "serial";
compatible = "snps,dw-apb-uart";
reg = <0x00130000 0x1000>;
@@ -502,7 +502,7 @@
status = "disabled";
};
- ssp0: ssp@00180000 {
+ ssp0: ssp@180000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x00180000 0x1000>;
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
@@ -514,7 +514,7 @@
status = "disabled";
};
- ssp1: ssp@00190000 {
+ ssp1: ssp@190000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x00190000 0x1000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
@@ -526,12 +526,12 @@
status = "disabled";
};
- hwrng: hwrng@00220000 {
+ hwrng: hwrng@220000 {
compatible = "brcm,iproc-rng200";
reg = <0x00220000 0x28>;
};
- dma0: dma@00310000 {
+ dma0: dma@310000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x00310000 0x1000>;
interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
@@ -551,7 +551,7 @@
iommus = <&smmu 0x6000 0x0000>;
};
- enet: ethernet@00340000{
+ enet: ethernet@340000{
compatible = "brcm,amac";
reg = <0x00340000 0x1000>;
reg-names = "amac_base";
@@ -560,7 +560,7 @@
status= "disabled";
};
- nand: nand@00360000 {
+ nand: nand@360000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
reg = <0x00360000 0x600>,
<0x0050a408 0x600>,
@@ -573,7 +573,7 @@
status = "disabled";
};
- sdio0: sdhci@003f1000 {
+ sdio0: sdhci@3f1000 {
compatible = "brcm,sdhci-iproc";
reg = <0x003f1000 0x100>;
interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
@@ -583,7 +583,7 @@
status = "disabled";
};
- sdio1: sdhci@003f2000 {
+ sdio1: sdhci@3f2000 {
compatible = "brcm,sdhci-iproc";
reg = <0x003f2000 0x100>;
interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/cavium/thunder-88xx.dts b/arch/arm64/boot/dts/cavium/thunder-88xx.dts
index 800ba65991f7..5ec2bfa5f714 100644
--- a/arch/arm64/boot/dts/cavium/thunder-88xx.dts
+++ b/arch/arm64/boot/dts/cavium/thunder-88xx.dts
@@ -60,7 +60,7 @@
serial1 = &uaa1;
};
- memory@00000000 {
+ memory@0 {
device_type = "memory";
reg = <0x0 0x00000000 0x0 0x80000000>;
};
diff --git a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
index 04dc8a8d1539..1a9103b269cb 100644
--- a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
+++ b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
@@ -62,97 +62,97 @@
#address-cells = <2>;
#size-cells = <0>;
- cpu@000 {
+ cpu@0 {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x000>;
enable-method = "psci";
};
- cpu@001 {
+ cpu@1 {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x001>;
enable-method = "psci";
};
- cpu@002 {
+ cpu@2 {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x002>;
enable-method = "psci";
};
- cpu@003 {
+ cpu@3 {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x003>;
enable-method = "psci";
};
- cpu@004 {
+ cpu@4 {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x004>;
enable-method = "psci";
};
- cpu@005 {
+ cpu@5 {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x005>;
enable-method = "psci";
};
- cpu@006 {
+ cpu@6 {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x006>;
enable-method = "psci";
};
- cpu@007 {
+ cpu@7 {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x007>;
enable-method = "psci";
};
- cpu@008 {
+ cpu@8 {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x008>;
enable-method = "psci";
};
- cpu@009 {
+ cpu@9 {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x009>;
enable-method = "psci";
};
- cpu@00a {
+ cpu@a {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x00a>;
enable-method = "psci";
};
- cpu@00b {
+ cpu@b {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x00b>;
enable-method = "psci";
};
- cpu@00c {
+ cpu@c {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x00c>;
enable-method = "psci";
};
- cpu@00d {
+ cpu@d {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x00d>;
enable-method = "psci";
};
- cpu@00e {
+ cpu@e {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x00e>;
enable-method = "psci";
};
- cpu@00f {
+ cpu@f {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x00f>;
diff --git a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
index abba750b87f8..3bbd017f088f 100644
--- a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
+++ b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
@@ -18,7 +18,7 @@
model = "Hisilicon Hip05 D02 Development Board";
compatible = "hisilicon,hip05-d02";
- memory@00000000 {
+ memory@0 {
device_type = "memory";
reg = <0x0 0x00000000 0x0 0x80000000>;
};
diff --git a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
index 7c4114a67753..9af633021a42 100644
--- a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
+++ b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
@@ -17,7 +17,7 @@
model = "Hisilicon Hip06 D03 Development Board";
compatible = "hisilicon,hip06-d03";
- memory@00000000 {
+ memory@0 {
device_type = "memory";
reg = <0x0 0x00000000 0x0 0x40000000>;
};
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
index 9c3bdf87e543..8f79e8dae102 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -56,7 +56,7 @@
stdout-path = "serial0:115200n8";
};
- memory@00000000 {
+ memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index 0d7b2ae46610..46ec003eabb0 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -56,7 +56,7 @@
stdout-path = "serial0:115200n8";
};
- memory@00000000 {
+ memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
index acf5c7d16d79..4fbb13d41451 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
@@ -57,7 +57,7 @@
stdout-path = "serial0:115200n8";
};
- memory@00000000 {
+ memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
diff --git a/arch/arm64/boot/dts/marvell/armada-8080-db.dts b/arch/arm64/boot/dts/marvell/armada-8080-db.dts
index 707af833832b..85b58a19a9fb 100644
--- a/arch/arm64/boot/dts/marvell/armada-8080-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8080-db.dts
@@ -55,7 +55,7 @@
stdout-path = "serial0:115200n8";
};
- memory@00000000 {
+ memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
index 95a1ff60f6c1..b98ea137371d 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
@@ -54,13 +54,13 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu@000 {
+ cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x000>;
enable-method = "psci";
};
- cpu@001 {
+ cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x001>;
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
index ba43a4357b89..116164ff260f 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
@@ -54,13 +54,13 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu@000 {
+ cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x000>;
enable-method = "psci";
};
- cpu@001 {
+ cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x001>;
diff --git a/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi
index bf1b22b70384..7f0661e12f5e 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi
@@ -52,13 +52,13 @@
#size-cells = <0>;
compatible = "marvell,armada-ap810-octa";
- cpu@000 {
+ cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x000>;
enable-method = "psci";
};
- cpu@001 {
+ cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x001>;
diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
index d6b800fd26d0..d2f88b92d8e2 100644
--- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
+++ b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
@@ -167,7 +167,7 @@
ranges = <0 0xe80000 0x10000>;
interrupt-parent = <&aic>;
- gpio0: gpio@0400 {
+ gpio0: gpio@400 {
compatible = "snps,dw-apb-gpio";
reg = <0x0400 0x400>;
#address-cells = <1>;
@@ -185,7 +185,7 @@
};
};
- gpio1: gpio@0800 {
+ gpio1: gpio@800 {
compatible = "snps,dw-apb-gpio";
reg = <0x0800 0x400>;
#address-cells = <1>;
@@ -203,7 +203,7 @@
};
};
- gpio2: gpio@0c00 {
+ gpio2: gpio@c00 {
compatible = "snps,dw-apb-gpio";
reg = <0x0c00 0x400>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 1d63e6b879de..d294b3de3125 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -192,7 +192,7 @@
};
};
- sdhci@07824000 {
+ sdhci@7824000 {
vmmc-supply = <&pm8916_l8>;
vqmmc-supply = <&pm8916_l5>;
@@ -202,7 +202,7 @@
status = "okay";
};
- sdhci@07864000 {
+ sdhci@7864000 {
vmmc-supply = <&pm8916_l11>;
vqmmc-supply = <&pm8916_l12>;
@@ -232,7 +232,7 @@
};
};
- lpass@07708000 {
+ lpass@7708000 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index 789f3e87321e..b8dbb203b664 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -51,31 +51,31 @@
pinctrl-1 = <&blsp2_uart2_4pins_sleep>;
};
- i2c@07577000 {
+ i2c@7577000 {
/* On Low speed expansion */
label = "LS-I2C0";
status = "okay";
};
- i2c@075b6000 {
+ i2c@75b6000 {
/* On Low speed expansion */
label = "LS-I2C1";
status = "okay";
};
- spi@07575000 {
+ spi@7575000 {
/* On Low speed expansion */
label = "LS-SPI0";
status = "okay";
};
- i2c@075b5000 {
+ i2c@75b5000 {
/* On High speed expansion */
label = "HS-I2C2";
status = "okay";
};
- spi@075ba000{
+ spi@75ba000{
/* On High speed expansion */
label = "HS-SPI1";
status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index dc3817593e14..2c4159480be2 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -495,7 +495,7 @@
status = "disabled";
};
- lpass: lpass@07708000 {
+ lpass: lpass@7708000 {
status = "disabled";
compatible = "qcom,lpass-cpu-apq8016";
clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
@@ -530,7 +530,7 @@
#sound-dai-cells = <1>;
};
- sdhc_1: sdhci@07824000 {
+ sdhc_1: sdhci@7824000 {
compatible = "qcom,sdhci-msm-v4";
reg = <0x07824900 0x11c>, <0x07824000 0x800>;
reg-names = "hc_mem", "core_mem";
@@ -547,7 +547,7 @@
status = "disabled";
};
- sdhc_2: sdhci@07864000 {
+ sdhc_2: sdhci@7864000 {
compatible = "qcom,sdhci-msm-v4";
reg = <0x07864900 0x11c>, <0x07864000 0x800>;
reg-names = "hc_mem", "core_mem";
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 887b61c872dd..b138414c248a 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -395,7 +395,7 @@
#clock-cells = <1>;
};
- blsp1_spi0: spi@07575000 {
+ blsp1_spi0: spi@7575000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x07575000 0x600>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
@@ -410,7 +410,7 @@
status = "disabled";
};
- blsp2_i2c0: i2c@075b5000 {
+ blsp2_i2c0: i2c@75b5000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x075b5000 0x1000>;
interrupts = <GIC_SPI 101 0>;
@@ -441,7 +441,7 @@
status = "disabled";
};
- blsp2_i2c1: i2c@075b6000 {
+ blsp2_i2c1: i2c@75b6000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x075b6000 0x1000>;
interrupts = <GIC_SPI 102 0>;
@@ -466,7 +466,7 @@
status = "disabled";
};
- blsp1_i2c2: i2c@07577000 {
+ blsp1_i2c2: i2c@7577000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x07577000 0x1000>;
interrupts = <GIC_SPI 97 0>;
@@ -481,7 +481,7 @@
status = "disabled";
};
- blsp2_spi5: spi@075ba000{
+ blsp2_spi5: spi@75ba000{
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x075ba000 0x600>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
@@ -522,7 +522,7 @@
#interrupt-cells = <2>;
};
- timer@09840000 {
+ timer@9840000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-10-13 17:54 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-13 17:54 [PATCH 1/2] arm: dts: fix unit-address leading 0s Rob Herring
2017-10-13 17:54 ` Rob Herring [this message]
2017-10-13 17:54 ` [PATCH 2/2] arm64: " Rob Herring
2017-10-19 21:29 ` [PATCH 1/2] arm: " Arnd Bergmann
2017-10-19 21:29 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171013175452.1198-2-robh@kernel.org \
--to=robh@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.