From: "Daniel P. Berrange" <berrange@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
"Daniel P. Berrange" <berrange@redhat.com>
Subject: [Qemu-devel] [PULL v1 08/11] io: get rid of bounce buffering in websock write path
Date: Mon, 16 Oct 2017 21:16:47 +0100 [thread overview]
Message-ID: <20171016201650.18399-9-berrange@redhat.com> (raw)
In-Reply-To: <20171016201650.18399-1-berrange@redhat.com>
Currently most outbound I/O on the websock channel gets copied into the
rawoutput buffer, and then immediately copied again into the encoutput
buffer, with a header prepended. Now that qio_channel_websock_encode
accepts a struct iovec, we can trivially remove this bounce buffering
and write directly to encoutput.
In doing so, we also now correctly validate the encoutput size against
the QIO_CHANNEL_WEBSOCK_MAX_BUFFER limit.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
---
include/io/channel-websock.h | 1 -
io/channel-websock.c | 64 +++++++++++++++++++-------------------------
2 files changed, 28 insertions(+), 37 deletions(-)
diff --git a/include/io/channel-websock.h b/include/io/channel-websock.h
index 3762707b9c..a7e5e92e61 100644
--- a/include/io/channel-websock.h
+++ b/include/io/channel-websock.h
@@ -59,7 +59,6 @@ struct QIOChannelWebsock {
Buffer encinput;
Buffer encoutput;
Buffer rawinput;
- Buffer rawoutput;
size_t payload_remain;
size_t pong_remain;
QIOChannelWebsockMask mask;
diff --git a/io/channel-websock.c b/io/channel-websock.c
index 93c06f5b94..e82b1beab3 100644
--- a/io/channel-websock.c
+++ b/io/channel-websock.c
@@ -24,6 +24,7 @@
#include "io/channel-websock.h"
#include "crypto/hash.h"
#include "trace.h"
+#include "qemu/iov.h"
#include <time.h>
@@ -633,19 +634,22 @@ static ssize_t qio_channel_websock_write_wire(QIOChannelWebsock *, Error **);
static void qio_channel_websock_write_close(QIOChannelWebsock *ioc,
uint16_t code, const char *reason)
{
- struct iovec iov;
- buffer_reserve(&ioc->rawoutput, 2 + (reason ? strlen(reason) : 0));
- *(uint16_t *)(ioc->rawoutput.buffer + ioc->rawoutput.offset) =
- cpu_to_be16(code);
- ioc->rawoutput.offset += 2;
+ struct iovec iov[2] = {
+ { .iov_base = &code, .iov_len = sizeof(code) },
+ };
+ size_t niov = 1;
+ size_t size = iov[0].iov_len;
+
+ cpu_to_be16s(&code);
+
if (reason) {
- buffer_append(&ioc->rawoutput, reason, strlen(reason));
+ iov[1].iov_base = (void *)reason;
+ iov[1].iov_len = strlen(reason);
+ size += iov[1].iov_len;
+ niov++;
}
- iov.iov_base = ioc->rawoutput.buffer;
- iov.iov_len = ioc->rawoutput.offset;
qio_channel_websock_encode(ioc, QIO_CHANNEL_WEBSOCK_OPCODE_CLOSE,
- &iov, 1, iov.iov_len);
- buffer_reset(&ioc->rawoutput);
+ iov, niov, size);
qio_channel_websock_write_wire(ioc, NULL);
qio_channel_shutdown(ioc->master, QIO_CHANNEL_SHUTDOWN_BOTH, NULL);
}
@@ -893,7 +897,6 @@ static void qio_channel_websock_finalize(Object *obj)
buffer_free(&ioc->encinput);
buffer_free(&ioc->encoutput);
buffer_free(&ioc->rawinput);
- buffer_free(&ioc->rawoutput);
object_unref(OBJECT(ioc->master));
if (ioc->io_tag) {
g_source_remove(ioc->io_tag);
@@ -1103,8 +1106,8 @@ static ssize_t qio_channel_websock_writev(QIOChannel *ioc,
Error **errp)
{
QIOChannelWebsock *wioc = QIO_CHANNEL_WEBSOCK(ioc);
- size_t i;
- ssize_t done = 0;
+ ssize_t want = iov_size(iov, niov);
+ ssize_t avail;
ssize_t ret;
if (wioc->io_err) {
@@ -1117,32 +1120,21 @@ static ssize_t qio_channel_websock_writev(QIOChannel *ioc,
return -1;
}
- for (i = 0; i < niov; i++) {
- size_t want = iov[i].iov_len;
- if ((want + wioc->rawoutput.offset) > QIO_CHANNEL_WEBSOCK_MAX_BUFFER) {
- want = (QIO_CHANNEL_WEBSOCK_MAX_BUFFER - wioc->rawoutput.offset);
- }
- if (want == 0) {
- goto done;
- }
-
- buffer_reserve(&wioc->rawoutput, want);
- buffer_append(&wioc->rawoutput, iov[i].iov_base, want);
- done += want;
- if (want < iov[i].iov_len) {
- break;
- }
+ avail = wioc->encoutput.offset >= QIO_CHANNEL_WEBSOCK_MAX_BUFFER ?
+ 0 : (QIO_CHANNEL_WEBSOCK_MAX_BUFFER - wioc->encoutput.offset);
+ if (want > avail) {
+ want = avail;
}
- done:
- if (wioc->rawoutput.offset) {
- struct iovec iov = { .iov_base = wioc->rawoutput.buffer,
- .iov_len = wioc->rawoutput.offset };
+ if (want) {
qio_channel_websock_encode(wioc,
QIO_CHANNEL_WEBSOCK_OPCODE_BINARY_FRAME,
- &iov, 1, iov.iov_len);
- buffer_reset(&wioc->rawoutput);
+ iov, niov, want);
}
+
+ /* Even if want == 0, we'll try write_wire in case there's
+ * pending data we could usefully flush out
+ */
ret = qio_channel_websock_write_wire(wioc, errp);
if (ret < 0 &&
ret != QIO_CHANNEL_ERR_BLOCK) {
@@ -1152,11 +1144,11 @@ static ssize_t qio_channel_websock_writev(QIOChannel *ioc,
qio_channel_websock_set_watch(wioc);
- if (done == 0) {
+ if (want == 0) {
return QIO_CHANNEL_ERR_BLOCK;
}
- return done;
+ return want;
}
static int qio_channel_websock_set_blocking(QIOChannel *ioc,
--
2.13.5
next prev parent reply other threads:[~2017-10-16 20:17 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-16 20:16 [Qemu-devel] [PULL v1 00/11] Merge QIO 2017-10-16 Daniel P. Berrange
2017-10-16 20:16 ` [Qemu-devel] [PULL v1 01/11] sockets: factor out a new try_bind() function Daniel P. Berrange
2017-10-16 20:16 ` [Qemu-devel] [PULL v1 02/11] sockets: factor out create_fast_reuse_socket Daniel P. Berrange
2017-10-16 20:16 ` [Qemu-devel] [PULL v1 03/11] sockets: Handle race condition between binds to the same port Daniel P. Berrange
2017-11-03 18:54 ` Peter Maydell
2017-11-06 10:40 ` Daniel P. Berrange
2017-10-16 20:16 ` [Qemu-devel] [PULL v1 04/11] io: monitor encoutput buffer size from websocket GSource Daniel P. Berrange
2017-10-16 20:16 ` [Qemu-devel] [PULL v1 05/11] io: simplify websocket ping reply handling Daniel P. Berrange
2017-10-16 20:16 ` [Qemu-devel] [PULL v1 06/11] io: get rid of qio_channel_websock_encode helper method Daniel P. Berrange
2017-10-16 20:16 ` [Qemu-devel] [PULL v1 07/11] io: pass a struct iovec into qio_channel_websock_encode Daniel P. Berrange
2017-10-16 20:16 ` Daniel P. Berrange [this message]
2017-10-16 20:16 ` [Qemu-devel] [PULL v1 09/11] io: cope with websock 'Connection' header having multiple values Daniel P. Berrange
2017-10-16 20:16 ` [Qemu-devel] [PULL v1 10/11] io: add trace points for websocket HTTP protocol headers Daniel P. Berrange
2017-10-16 20:16 ` [Qemu-devel] [PULL v1 11/11] io: fix mem leak in websock error path Daniel P. Berrange
2017-10-17 12:12 ` [Qemu-devel] [PULL v1 00/11] Merge QIO 2017-10-16 Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171016201650.18399-9-berrange@redhat.com \
--to=berrange@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.