From: Jesper Dangaard Brouer <brouer@redhat.com>
To: Yann Ylavic <ylavic.dev@gmail.com>
Cc: Linux Kernel Network Developers <netdev@vger.kernel.org>,
jakub.kicinski@netronome.com,
"Michael S. Tsirkin" <mst@redhat.com>,
pavel.odintsov@gmail.com, Jason Wang <jasowang@redhat.com>,
mchan@broadcom.com, John Fastabend <john.fastabend@gmail.com>,
peter.waskiewicz.jr@intel.com, ast@fiberby.dk,
Daniel Borkmann <borkmann@iogearbox.net>,
Alexei Starovoitov <alexei.starovoitov@gmail.com>,
Andy Gospodarek <andy@greyhouse.net>,
brouer@redhat.com
Subject: Re: [net-next V8 PATCH 1/5] bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP
Date: Wed, 18 Oct 2017 10:38:07 +0200 [thread overview]
Message-ID: <20171018103807.367e91ee@redhat.com> (raw)
In-Reply-To: <CAKQ1sVMH-h36UWwuKhcVC=ZN+L=y3y3apayye_yKYKXTbqMGTQ@mail.gmail.com>
On Mon, 16 Oct 2017 12:19:28 +0200 Jesper Dangaard Brouer <brouer@redhat.com> wrote:
> +static struct bpf_map *cpu_map_alloc(union bpf_attr *attr)
> +{
> + struct bpf_cpu_map *cmap;
> + int err = -ENOMEM;
Notice err is set to -ENOMEM.
> + u64 cost;
> + int ret;
> +
> + if (!capable(CAP_SYS_ADMIN))
> + return ERR_PTR(-EPERM);
> +
> + /* check sanity of attributes */
> + if (attr->max_entries == 0 || attr->key_size != 4 ||
> + attr->value_size != 4 || attr->map_flags & ~BPF_F_NUMA_NODE)
> + return ERR_PTR(-EINVAL);
> +
> + cmap = kzalloc(sizeof(*cmap), GFP_USER);
> + if (!cmap)
> + return ERR_PTR(-ENOMEM);
> +
> + /* mandatory map attributes */
> + cmap->map.map_type = attr->map_type;
> + cmap->map.key_size = attr->key_size;
> + cmap->map.value_size = attr->value_size;
> + cmap->map.max_entries = attr->max_entries;
> + cmap->map.map_flags = attr->map_flags;
> + cmap->map.numa_node = bpf_map_attr_numa_node(attr);
> +
> + /* Pre-limit array size based on NR_CPUS, not final CPU check */
> + if (cmap->map.max_entries > NR_CPUS) {
> + err = -E2BIG;
> + goto free_cmap;
> + }
> +
> + /* make sure page count doesn't overflow */
> + cost = (u64) cmap->map.max_entries * sizeof(struct bpf_cpu_map_entry *);
> + cost += cpu_map_bitmap_size(attr) * num_possible_cpus();
> + if (cost >= U32_MAX - PAGE_SIZE)
> + goto free_cmap;
> + cmap->map.pages = round_up(cost, PAGE_SIZE) >> PAGE_SHIFT;
> +
> + /* Notice returns -EPERM on if map size is larger than memlock limit */
[... continued below ...]
On Wed, 18 Oct 2017 09:45:59 +0200 Yann Ylavic <ylavic.dev@gmail.com> wrote:
> On Mon, Oct 16, 2017 at 12:19 PM, Jesper Dangaard Brouer
> <brouer@redhat.com> wrote:
> > +
> > + /* Notice returns -EPERM on if map size is larger than memlock limit */
> > + ret = bpf_map_precharge_memlock(cmap->map.pages);
> > + if (ret) {
> > + err = ret;
> > + goto free_cmap;
> > + }
> > +
> > + /* A per cpu bitfield with a bit per possible CPU in map */
> > + cmap->flush_needed = __alloc_percpu(cpu_map_bitmap_size(attr),
> > + __alignof__(unsigned long));
> > + if (!cmap->flush_needed)
> > + goto free_cmap;
> > +
> > + /* Alloc array for possible remote "destination" CPUs */
> > + cmap->cpu_map = bpf_map_area_alloc(cmap->map.max_entries *
> > + sizeof(struct bpf_cpu_map_entry *),
> > + cmap->map.numa_node);
> > + if (!cmap->cpu_map)
>
> ret = -ENOMEM; ?
Did you notice that "err" already is = -ENOMEM at this point?
> > + goto free_percpu;
> > +
> > + return &cmap->map;
> > +free_percpu:
> > + free_percpu(cmap->flush_needed);
> > +free_cmap:
> > + kfree(cmap);
> > + return ERR_PTR(err);
> > +}
>
>
> Regards,
> Yann.
--
Best regards,
Jesper Dangaard Brouer
MSc.CS, Principal Kernel Engineer at Red Hat
LinkedIn: http://www.linkedin.com/in/brouer
next prev parent reply other threads:[~2017-10-18 8:38 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-16 10:19 [net-next V8 PATCH 0/5] New bpf cpumap type for XDP_REDIRECT Jesper Dangaard Brouer
2017-10-16 10:19 ` [net-next V8 PATCH 1/5] bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP Jesper Dangaard Brouer
2017-10-16 21:49 ` Alexei Starovoitov
2017-10-17 10:47 ` Jesper Dangaard Brouer
2017-10-17 14:00 ` Daniel Borkmann
2017-10-18 7:45 ` Yann Ylavic
2017-10-18 8:38 ` Jesper Dangaard Brouer [this message]
2017-10-18 10:47 ` Yann Ylavic
2017-10-16 10:19 ` [net-next V8 PATCH 2/5] bpf: XDP_REDIRECT enable use of cpumap Jesper Dangaard Brouer
2017-10-16 10:19 ` [net-next V8 PATCH 3/5] bpf: cpumap xdp_buff to skb conversion and allocation Jesper Dangaard Brouer
2017-10-18 14:12 ` Michael S. Tsirkin
2017-10-19 10:10 ` Jesper Dangaard Brouer
2017-10-16 10:19 ` [net-next V8 PATCH 4/5] bpf: cpumap add tracepoints Jesper Dangaard Brouer
2017-10-16 10:19 ` [net-next V8 PATCH 5/5] samples/bpf: add cpumap sample program xdp_redirect_cpu Jesper Dangaard Brouer
2017-10-18 11:12 ` [net-next V8 PATCH 0/5] New bpf cpumap type for XDP_REDIRECT David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171018103807.367e91ee@redhat.com \
--to=brouer@redhat.com \
--cc=alexei.starovoitov@gmail.com \
--cc=andy@greyhouse.net \
--cc=ast@fiberby.dk \
--cc=borkmann@iogearbox.net \
--cc=jakub.kicinski@netronome.com \
--cc=jasowang@redhat.com \
--cc=john.fastabend@gmail.com \
--cc=mchan@broadcom.com \
--cc=mst@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=pavel.odintsov@gmail.com \
--cc=peter.waskiewicz.jr@intel.com \
--cc=ylavic.dev@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.