From: "Gustavo A. R. Silva" <garsilva@embeddedor.com>
To: Johannes Berg <johannes@sipsolutions.net>,
"David S. Miller" <davem@davemloft.net>
Cc: linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org,
"Gustavo A. R. Silva" <garsilva@embeddedor.com>
Subject: [PATCH] net: wireless: mark expected switch fall-throughs
Date: Fri, 20 Oct 2017 12:21:45 -0500 [thread overview]
Message-ID: <20171020172145.GA5366@embeddedor.com> (raw)
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
---
This code was tested by compilation only (GCC 7.2.0 was used).
Please, verify if the actual intention of the code is to fall through.
net/wireless/chan.c | 2 ++
net/wireless/nl80211.c | 10 ++++++++++
net/wireless/scan.c | 3 ++-
net/wireless/wext-compat.c | 2 ++
4 files changed, 16 insertions(+), 1 deletion(-)
diff --git a/net/wireless/chan.c b/net/wireless/chan.c
index eb82427..6072613 100644
--- a/net/wireless/chan.c
+++ b/net/wireless/chan.c
@@ -741,6 +741,7 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy,
case NL80211_CHAN_WIDTH_20:
if (!ht_cap->ht_supported)
return false;
+ /* fall through */
case NL80211_CHAN_WIDTH_20_NOHT:
prohibited_flags |= IEEE80211_CHAN_NO_20MHZ;
width = 20;
@@ -763,6 +764,7 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy,
cap = vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
if (cap != IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ)
return false;
+ /* fall through */
case NL80211_CHAN_WIDTH_80:
if (!vht_cap->vht_supported)
return false;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index fce2cbe..a8bbb6c 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1509,6 +1509,7 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
state->split_start++;
if (state->split)
break;
+ /* fall through */
case 1:
if (nla_put(msg, NL80211_ATTR_CIPHER_SUITES,
sizeof(u32) * rdev->wiphy.n_cipher_suites,
@@ -1555,6 +1556,7 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
state->split_start++;
if (state->split)
break;
+ /* fall through */
case 2:
if (nl80211_put_iftypes(msg, NL80211_ATTR_SUPPORTED_IFTYPES,
rdev->wiphy.interface_modes))
@@ -1562,6 +1564,7 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
state->split_start++;
if (state->split)
break;
+ /* fall through */
case 3:
nl_bands = nla_nest_start(msg, NL80211_ATTR_WIPHY_BANDS);
if (!nl_bands)
@@ -1587,6 +1590,7 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
state->chan_start++;
if (state->split)
break;
+ /* fall through */
default:
/* add frequencies */
nl_freqs = nla_nest_start(
@@ -1640,6 +1644,7 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
state->split_start++;
if (state->split)
break;
+ /* fall through */
case 4:
nl_cmds = nla_nest_start(msg, NL80211_ATTR_SUPPORTED_COMMANDS);
if (!nl_cmds)
@@ -1666,6 +1671,7 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
state->split_start++;
if (state->split)
break;
+ /* fall through */
case 5:
if (rdev->ops->remain_on_channel &&
(rdev->wiphy.flags & WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL) &&
@@ -1683,6 +1689,7 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
state->split_start++;
if (state->split)
break;
+ /* fall through */
case 6:
#ifdef CONFIG_PM
if (nl80211_send_wowlan(msg, rdev, state->split))
@@ -1693,6 +1700,7 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
#else
state->split_start++;
#endif
+ /* fall through */
case 7:
if (nl80211_put_iftypes(msg, NL80211_ATTR_SOFTWARE_IFTYPES,
rdev->wiphy.software_iftypes))
@@ -1705,6 +1713,7 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
state->split_start++;
if (state->split)
break;
+ /* fall through */
case 8:
if ((rdev->wiphy.flags & WIPHY_FLAG_HAVE_AP_SME) &&
nla_put_u32(msg, NL80211_ATTR_DEVICE_AP_SME,
@@ -4192,6 +4201,7 @@ static int parse_station_flags(struct genl_info *info,
params->sta_flags_mask = BIT(NL80211_STA_FLAG_AUTHENTICATED) |
BIT(NL80211_STA_FLAG_MFP) |
BIT(NL80211_STA_FLAG_AUTHORIZED);
+ /* fall through */
default:
return -EINVAL;
}
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 9f0901f..ebfb6d8 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -1139,7 +1139,8 @@ cfg80211_inform_bss_data(struct wiphy *wiphy,
switch (ftype) {
case CFG80211_BSS_FTYPE_BEACON:
ies->from_beacon = true;
- /* fall through to assign */
+ /* to assign */
+ /* fall through */
case CFG80211_BSS_FTYPE_UNKNOWN:
rcu_assign_pointer(tmp.pub.beacon_ies, ies);
break;
diff --git a/net/wireless/wext-compat.c b/net/wireless/wext-compat.c
index 5d4a02c..a8d96e7 100644
--- a/net/wireless/wext-compat.c
+++ b/net/wireless/wext-compat.c
@@ -1333,6 +1333,7 @@ static struct iw_statistics *cfg80211_wireless_stats(struct net_device *dev)
wstats.qual.qual = sig + 110;
break;
}
+ /* fall through */
case CFG80211_SIGNAL_TYPE_UNSPEC:
if (sinfo.filled & BIT(NL80211_STA_INFO_SIGNAL)) {
wstats.qual.updated |= IW_QUAL_LEVEL_UPDATED;
@@ -1341,6 +1342,7 @@ static struct iw_statistics *cfg80211_wireless_stats(struct net_device *dev)
wstats.qual.qual = sinfo.signal;
break;
}
+ /* fall through */
default:
wstats.qual.updated |= IW_QUAL_LEVEL_INVALID;
wstats.qual.updated |= IW_QUAL_QUAL_INVALID;
--
2.7.4
next reply other threads:[~2017-10-20 17:45 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-20 17:21 Gustavo A. R. Silva [this message]
2017-10-23 6:48 ` [PATCH] net: wireless: mark expected switch fall-throughs Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171020172145.GA5366@embeddedor.com \
--to=garsilva@embeddedor.com \
--cc=davem@davemloft.net \
--cc=johannes@sipsolutions.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.