diff for duplicates of <20171024064919.GD6403@dragon> diff --git a/a/1.txt b/N1/1.txt index 918ba45..88e9127 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,6 +1,6 @@ On Mon, Oct 23, 2017 at 05:32:09PM -0500, Rob Herring wrote: > On Sun, Oct 15, 2017 at 10:49:18PM +0800, Shawn Guo wrote: -> > From: Pengcheng Li <lpc.li@hisilicon.com> +> > From: Pengcheng Li <lpc.li-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org> > > > > It adds inno-usb2-phy driver for hi3798cv200 SoC USB 2.0 support. One > > inno-usb2-phy device can support up to two PHY ports. While there is @@ -10,9 +10,9 @@ On Mon, Oct 23, 2017 at 05:32:09PM -0500, Rob Herring wrote: > > Hi3798cv200 needs to access PHY port0 register via particular peripheral > > syscon controller register to control PHY, like turning on PHY clock. > > -> > Signed-off-by: Pengcheng Li <lpc.li@hisilicon.com> -> > Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com> -> > Signed-off-by: Shawn Guo <shawn.guo@linaro.org> +> > Signed-off-by: Pengcheng Li <lpc.li-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org> +> > Signed-off-by: Jiancheng Xue <xuejiancheng-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org> +> > Signed-off-by: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> > > --- > > .../devicetree/bindings/phy/phy-hisi-inno-usb2.txt | 31 +++ > > drivers/phy/hisilicon/Kconfig | 10 + @@ -58,3 +58,7 @@ Shawn > > + in reset-names. > > +- reset-names: Should contain "power_on", "utmi0" and "utmi1". The "utmi1" > > + should exist only if the device has two PHY port. +-- +To unsubscribe from this list: send the line "unsubscribe devicetree" in +the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org +More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/a/content_digest b/N1/content_digest index 8120ad9..d1cea7a 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,14 +1,20 @@ "ref\01508078958-16966-1-git-send-email-shawnguo@kernel.org\0" "ref\020171023223209.snq2xw3thjjwybmh@rob-hp-laptop\0" - "From\0shawnguo@kernel.org (Shawn Guo)\0" - "Subject\0[PATCH] phy: add inno-usb2-phy driver for hi3798cv200 SoC\0" + "From\0Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>\0" + "Subject\0Re: [PATCH] phy: add inno-usb2-phy driver for hi3798cv200 SoC\0" "Date\0Tue, 24 Oct 2017 14:49:20 +0800\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>\0" + "Cc\0Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>" + devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org + Pengcheng Li <lpc.li-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org> + Jiancheng Xue <xuejiancheng-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org> + " Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>\0" "\00:1\0" "b\0" "On Mon, Oct 23, 2017 at 05:32:09PM -0500, Rob Herring wrote:\n" "> On Sun, Oct 15, 2017 at 10:49:18PM +0800, Shawn Guo wrote:\n" - "> > From: Pengcheng Li <lpc.li@hisilicon.com>\n" + "> > From: Pengcheng Li <lpc.li-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>\n" "> > \n" "> > It adds inno-usb2-phy driver for hi3798cv200 SoC USB 2.0 support. One\n" "> > inno-usb2-phy device can support up to two PHY ports. While there is\n" @@ -18,9 +24,9 @@ "> > Hi3798cv200 needs to access PHY port0 register via particular peripheral\n" "> > syscon controller register to control PHY, like turning on PHY clock.\n" "> > \n" - "> > Signed-off-by: Pengcheng Li <lpc.li@hisilicon.com>\n" - "> > Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com>\n" - "> > Signed-off-by: Shawn Guo <shawn.guo@linaro.org>\n" + "> > Signed-off-by: Pengcheng Li <lpc.li-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>\n" + "> > Signed-off-by: Jiancheng Xue <xuejiancheng-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>\n" + "> > Signed-off-by: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>\n" "> > ---\n" "> > .../devicetree/bindings/phy/phy-hisi-inno-usb2.txt | 31 +++\n" "> > drivers/phy/hisilicon/Kconfig | 10 +\n" @@ -65,6 +71,10 @@ "> > +- resets: The list of phandle and reset specifier pairs for each reset signal\n" "> > + in reset-names.\n" "> > +- reset-names: Should contain \"power_on\", \"utmi0\" and \"utmi1\". The \"utmi1\"\n" - > > + should exist only if the device has two PHY port. + "> > + should exist only if the device has two PHY port.\n" + "--\n" + "To unsubscribe from this list: send the line \"unsubscribe devicetree\" in\n" + "the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\n" + More majordomo info at http://vger.kernel.org/majordomo-info.html -fc995f8461e79840ba23e4d27d081d75bcfa0517c60c403ce1cc964fa621fd56 +29796bd580dd6c55ee0432dd0800e8f2c9c010c0875619b372c23854c8b6f4dc
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.