[PATCH 0/3] RFC: implement VF reset for i40e, e1000 and ixgbe

[luca.boccassi@gmail.com]

From: Luca Boccassi <bluca@debian.org>

These patches were originally sent by Wenzhuo Lu:

http://dpdk.org/dev/patchwork/patch/14009/
http://dpdk.org/dev/patchwork/patch/14010/
http://dpdk.org/dev/patchwork/patch/14011/

The current rte_eth_dev_reset API does not correctly reset the VF
when the PF flaps on the host. With these patches, at least the ixgbe
driver with a X540 card (Linux kernel 4.9 on the host) appears to
work correctly.
The test is as simple ip link down/up on the host, and then check that
traffic still flows through the VF in the guest.

I am not an expert in these PMDs hence the RFC mark - I would like to
ask for feedback and help from the PMD maintainers and developers.

Thanks!

Luca Boccassi (3):
  net/i40e: implement VF reset
  net/e1000: implement VF reset
  net/ixgbe: implement VF reset

 drivers/net/e1000/igb_ethdev.c    | 59 ++++++++++++++++++++++++++++++++++++++
 drivers/net/i40e/i40e_ethdev.h    |  3 ++
 drivers/net/i40e/i40e_ethdev_vf.c | 56 +++++++++++++++++++++++++++++++++---
 drivers/net/i40e/i40e_rxtx.c      | 11 +++++++
 drivers/net/i40e/i40e_rxtx.h      |  4 +++
 drivers/net/ixgbe/ixgbe_ethdev.c  | 60 ++++++++++++++++++++++++++++++++++-----
 drivers/net/ixgbe/ixgbe_ethdev.h  |  2 +-
 drivers/net/ixgbe/ixgbe_rxtx.c    | 12 ++++++--
 8 files changed, 192 insertions(+), 15 deletions(-)

-- 
2.11.0