From: Doug Berger <opendmb@gmail.com>
To: Gregory Fong <gregory.0xf0@gmail.com>
Cc: Doug Berger <opendmb@gmail.com>,
Linus Walleij <linus.walleij@linaro.org>,
Brian Norris <computersforpeace@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
bcm-kernel-feedback-list@broadcom.com,
linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/7] gpio: brcmstb: allow all instances to be wakeup sources
Date: Tue, 24 Oct 2017 12:54:46 -0700 [thread overview]
Message-ID: <20171024195451.30535-3-opendmb@gmail.com> (raw)
In-Reply-To: <20171024195451.30535-1-opendmb@gmail.com>
This commit allows a wakeup parent interrupt to be shared between
instances.
It also removes the redundant can_wake member of the private data
structure by using whether the parent_wake_irq has been defined to
indicate that the GPIO device can wake.
Fixes: 19a7b6940b78 ("gpio: brcmstb: Add interrupt and wakeup source support")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Gregory Fong <gregory.0xf0@gmail.com>
---
drivers/gpio/gpio-brcmstb.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/gpio/gpio-brcmstb.c b/drivers/gpio/gpio-brcmstb.c
index 9b8fcca7ad17..2031b73e066c 100644
--- a/drivers/gpio/gpio-brcmstb.c
+++ b/drivers/gpio/gpio-brcmstb.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2015 Broadcom Corporation
+ * Copyright (C) 2015-2017 Broadcom
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -47,7 +47,6 @@ struct brcmstb_gpio_priv {
struct platform_device *pdev;
int parent_irq;
int gpio_base;
- bool can_wake;
int parent_wake_irq;
struct notifier_block reboot_notifier;
};
@@ -349,10 +348,11 @@ static int brcmstb_gpio_irq_setup(struct platform_device *pdev,
/* Ensures that all non-wakeup IRQs are disabled at suspend */
bank->irq_chip.flags = IRQCHIP_MASK_ON_SUSPEND;
- if (IS_ENABLED(CONFIG_PM_SLEEP) && !priv->can_wake &&
+ if (IS_ENABLED(CONFIG_PM_SLEEP) && !priv->parent_wake_irq &&
of_property_read_bool(np, "wakeup-source")) {
priv->parent_wake_irq = platform_get_irq(pdev, 1);
if (priv->parent_wake_irq < 0) {
+ priv->parent_wake_irq = 0;
dev_warn(dev,
"Couldn't get wake IRQ - GPIOs will not be able to wake from sleep");
} else {
@@ -364,8 +364,9 @@ static int brcmstb_gpio_irq_setup(struct platform_device *pdev,
device_set_wakeup_capable(dev, true);
device_wakeup_enable(dev);
err = devm_request_irq(dev, priv->parent_wake_irq,
- brcmstb_gpio_wake_irq_handler, 0,
- "brcmstb-gpio-wake", priv);
+ brcmstb_gpio_wake_irq_handler,
+ IRQF_SHARED,
+ "brcmstb-gpio-wake", priv);
if (err < 0) {
dev_err(dev, "Couldn't request wake IRQ");
@@ -375,11 +376,10 @@ static int brcmstb_gpio_irq_setup(struct platform_device *pdev,
priv->reboot_notifier.notifier_call =
brcmstb_gpio_reboot;
register_reboot_notifier(&priv->reboot_notifier);
- priv->can_wake = true;
}
}
- if (priv->can_wake)
+ if (priv->parent_wake_irq)
bank->irq_chip.irq_set_wake = brcmstb_gpio_irq_set_wake;
err = gpiochip_irqchip_add(&bank->gc, &bank->irq_chip, 0,
--
2.14.1
WARNING: multiple messages have this Message-ID (diff)
From: opendmb@gmail.com (Doug Berger)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/7] gpio: brcmstb: allow all instances to be wakeup sources
Date: Tue, 24 Oct 2017 12:54:46 -0700 [thread overview]
Message-ID: <20171024195451.30535-3-opendmb@gmail.com> (raw)
In-Reply-To: <20171024195451.30535-1-opendmb@gmail.com>
This commit allows a wakeup parent interrupt to be shared between
instances.
It also removes the redundant can_wake member of the private data
structure by using whether the parent_wake_irq has been defined to
indicate that the GPIO device can wake.
Fixes: 19a7b6940b78 ("gpio: brcmstb: Add interrupt and wakeup source support")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Gregory Fong <gregory.0xf0@gmail.com>
---
drivers/gpio/gpio-brcmstb.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/gpio/gpio-brcmstb.c b/drivers/gpio/gpio-brcmstb.c
index 9b8fcca7ad17..2031b73e066c 100644
--- a/drivers/gpio/gpio-brcmstb.c
+++ b/drivers/gpio/gpio-brcmstb.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2015 Broadcom Corporation
+ * Copyright (C) 2015-2017 Broadcom
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -47,7 +47,6 @@ struct brcmstb_gpio_priv {
struct platform_device *pdev;
int parent_irq;
int gpio_base;
- bool can_wake;
int parent_wake_irq;
struct notifier_block reboot_notifier;
};
@@ -349,10 +348,11 @@ static int brcmstb_gpio_irq_setup(struct platform_device *pdev,
/* Ensures that all non-wakeup IRQs are disabled at suspend */
bank->irq_chip.flags = IRQCHIP_MASK_ON_SUSPEND;
- if (IS_ENABLED(CONFIG_PM_SLEEP) && !priv->can_wake &&
+ if (IS_ENABLED(CONFIG_PM_SLEEP) && !priv->parent_wake_irq &&
of_property_read_bool(np, "wakeup-source")) {
priv->parent_wake_irq = platform_get_irq(pdev, 1);
if (priv->parent_wake_irq < 0) {
+ priv->parent_wake_irq = 0;
dev_warn(dev,
"Couldn't get wake IRQ - GPIOs will not be able to wake from sleep");
} else {
@@ -364,8 +364,9 @@ static int brcmstb_gpio_irq_setup(struct platform_device *pdev,
device_set_wakeup_capable(dev, true);
device_wakeup_enable(dev);
err = devm_request_irq(dev, priv->parent_wake_irq,
- brcmstb_gpio_wake_irq_handler, 0,
- "brcmstb-gpio-wake", priv);
+ brcmstb_gpio_wake_irq_handler,
+ IRQF_SHARED,
+ "brcmstb-gpio-wake", priv);
if (err < 0) {
dev_err(dev, "Couldn't request wake IRQ");
@@ -375,11 +376,10 @@ static int brcmstb_gpio_irq_setup(struct platform_device *pdev,
priv->reboot_notifier.notifier_call =
brcmstb_gpio_reboot;
register_reboot_notifier(&priv->reboot_notifier);
- priv->can_wake = true;
}
}
- if (priv->can_wake)
+ if (priv->parent_wake_irq)
bank->irq_chip.irq_set_wake = brcmstb_gpio_irq_set_wake;
err = gpiochip_irqchip_add(&bank->gc, &bank->irq_chip, 0,
--
2.14.1
next prev parent reply other threads:[~2017-10-24 19:54 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-24 19:54 [PATCH v2 0/7] gpio: brcmstb: improved interrupt and wake support Doug Berger
2017-10-24 19:54 ` Doug Berger
2017-10-24 19:54 ` [PATCH v2 1/7] gpio: brcmstb: Do not use gc->pin2mask() Doug Berger
2017-10-24 19:54 ` Doug Berger
2017-10-24 19:54 ` Doug Berger
2017-10-28 16:54 ` Florian Fainelli
2017-10-28 16:54 ` Florian Fainelli
2017-10-24 19:54 ` Doug Berger [this message]
2017-10-24 19:54 ` [PATCH v2 2/7] gpio: brcmstb: allow all instances to be wakeup sources Doug Berger
2017-10-31 9:28 ` Linus Walleij
2017-10-31 9:28 ` Linus Walleij
2017-10-24 19:54 ` [PATCH v2 3/7] gpio: brcmstb: release the bgpio lock during irq handlers Doug Berger
2017-10-24 19:54 ` Doug Berger
2017-10-31 9:29 ` Linus Walleij
2017-10-31 9:29 ` Linus Walleij
2017-10-24 19:54 ` [PATCH v2 4/7] gpio: brcmstb: switch to handle_level_irq flow Doug Berger
2017-10-24 19:54 ` Doug Berger
2017-10-31 9:30 ` Linus Walleij
2017-10-31 9:30 ` Linus Walleij
2017-10-24 19:54 ` [PATCH v2 5/7] gpio: brcmstb: correct the configuration of level interrupts Doug Berger
2017-10-24 19:54 ` Doug Berger
2017-10-31 9:31 ` Linus Walleij
2017-10-31 9:31 ` Linus Walleij
2017-10-24 19:54 ` [PATCH v2 6/7] gpio: brcmstb: consolidate interrupt domains Doug Berger
2017-10-24 19:54 ` Doug Berger
2017-10-26 23:44 ` Gregory Fong
2017-10-26 23:44 ` Gregory Fong
2017-10-28 16:56 ` Florian Fainelli
2017-10-28 16:56 ` Florian Fainelli
2017-10-31 9:34 ` Linus Walleij
2017-10-31 9:34 ` Linus Walleij
2017-10-24 19:54 ` [PATCH v2 7/7] gpio: brcmstb: implement suspend/resume/shutdown Doug Berger
2017-10-24 19:54 ` Doug Berger
2017-10-26 23:51 ` Gregory Fong
2017-10-26 23:51 ` Gregory Fong
2017-10-28 16:58 ` Florian Fainelli
2017-10-28 16:58 ` Florian Fainelli
2017-10-31 9:52 ` Linus Walleij
2017-10-31 9:52 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171024195451.30535-3-opendmb@gmail.com \
--to=opendmb@gmail.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=computersforpeace@gmail.com \
--cc=f.fainelli@gmail.com \
--cc=gregory.0xf0@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.