All of lore.kernel.org
 help / color / mirror / Atom feed
From: "KAVITA MATHUR" <kavitam@cdot.in>
To: Ben Greear <greearb@candelatech.com>,
	ath10k <ath10k@lists.infradead.org>
Subject: Re: Throughput drop with ath10k latest driver and firmware-5.bin_10.2.4.70.66
Date: Fri, 27 Oct 2017 13:55:22 +0530	[thread overview]
Message-ID: <20171027081929.M60415@cdot.in> (raw)
In-Reply-To: <df6008fe-79e0-ce06-c191-8557e11f1b3a@candelatech.com>

On Thu, 26 Oct 2017 07:48:18 -0700, Ben Greear wrote
> On 10/26/2017 04:20 AM, KAVITA MATHUR wrote:
> > Hi,
> >
> > In my AP , there are two radios, one ath9k based module WLE200NX and second ath10k based
> > WLE600VX.
> >
> > I configured both the radios as AP in IEEE 802.11a 40 MHz HT mode and performed
> > throughput test.
> >
> > Measured throughput with ath9k is 164Mbps while with ath10k it is 137Mbps. I could not
> > understand the reason of this drop(27 Mbps)?
> >
> > My test setup was inside RF-Shield. There was no interference and system was associated
> > at 300Mbps in both cases.
> >
> > ath10k driver was taken from ath10k git and firmware version is
> > firmware-5.bin_10.2.4.70.66.
> > ath9k drives was taken from stable backport release backport-4.4.2-1.
> >
> > kernel version : 3.12
> > openwrt version : Chaos Calmer 15.05.0
> >
> > Please suggest me how can I increase the throughput of my AP.
> 
> Does it work any better with different firmware/software, or is ath10k just 
> always slower for you?

Yes. Measured throughput in the same configuration was 193 Mbps when used ath10k driver
from backport stable release backport-4.4.2-1 and firmware version
firmware-5.bin_10.2.4.70.63-2. But this version is not stable for ac mode and it does
not support MESH. Please suggest appropriate ath10k driver version and firmware. 

> 
> How much attenuation are you using?
Received Signal strength is -38 dBm and tx power is 5dBm in all these testcases.

> Thanks,
> Ben
> 
> >
> >
> >
> >
> > Thanks & Regards,
> > कविता माथुर Kavita Mathur
> > वरिष्ठ अनुसंधान अभियंता  Senior Research Engineer
> > सी-डॉट                      C-DOT
> > इलैक्ट्रॉनिक्स सिटी फेज़ I         Electronics City Phase I
> > होसूर रोड, बेंगलूरु               Hosur Road, Bengaluru – 560100
> > फोन  Ph 080-28529896
> > Disclaimer:
> > ----------
> > This email and any files transmitted with it
> >
> >
> > _______________________________________________
> > ath10k mailing list
> > ath10k@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/ath10k
> >
> 
> -- 
> Ben Greear <greearb@candelatech.com>
> Candela Technologies Inc  http://www.candelatech.com


Thanks & Regards,
कविता माथुर Kavita Mathur 
वरिष्ठ अनुसंधान अभियंता  Senior Research Engineer 
सी-डॉट                      C-DOT
इलैक्ट्रॉनिक्स सिटी फेज़ I         Electronics City Phase I
होसूर रोड, बेंगलूरु               Hosur Road, Bengaluru – 560100
फोन  Ph 080-28529896
Disclaimer:
----------
This email and any files transmitted with it


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

  reply	other threads:[~2017-10-27  8:34 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-26 11:20 Throughput drop with ath10k latest driver and firmware-5.bin_10.2.4.70.66 KAVITA MATHUR
2017-10-26 14:48 ` Ben Greear
2017-10-27  8:25   ` KAVITA MATHUR [this message]
2017-10-27 16:49     ` Ben Greear

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171027081929.M60415@cdot.in \
    --to=kavitam@cdot.in \
    --cc=ath10k@lists.infradead.org \
    --cc=greearb@candelatech.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.