From: Florian Fainelli <f.fainelli@gmail.com>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, andrew@lunn.ch,
vivien.didelot@savoirfairelinux.com,
Florian Fainelli <f.fainelli@gmail.com>
Subject: [PATCH net-next 2/4] net: dsa: tag_brcm: Prepare for supporting prepended tag
Date: Fri, 10 Nov 2017 15:22:53 -0800 [thread overview]
Message-ID: <20171110232255.2462-3-f.fainelli@gmail.com> (raw)
In-Reply-To: <20171110232255.2462-1-f.fainelli@gmail.com>
In preparation for supporting the same Broadcom tag format, but instead
of inserted between the MAC SA and EtherType, prepended to the Ethernet
frame, restructure the code a little bit to make that possible and take
an offset parameter.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
net/dsa/tag_brcm.c | 45 ++++++++++++++++++++++++++++++++++-----------
1 file changed, 34 insertions(+), 11 deletions(-)
diff --git a/net/dsa/tag_brcm.c b/net/dsa/tag_brcm.c
index 9e082bae3cb0..771409a1e65c 100644
--- a/net/dsa/tag_brcm.c
+++ b/net/dsa/tag_brcm.c
@@ -59,7 +59,9 @@
#define BRCM_EG_TC_MASK 0x7
#define BRCM_EG_PID_MASK 0x1f
-static struct sk_buff *brcm_tag_xmit(struct sk_buff *skb, struct net_device *dev)
+static struct sk_buff *brcm_tag_xmit_ll(struct sk_buff *skb,
+ struct net_device *dev,
+ unsigned int offset)
{
struct dsa_port *dp = dsa_slave_to_port(dev);
u16 queue = skb_get_queue_mapping(skb);
@@ -70,10 +72,10 @@ static struct sk_buff *brcm_tag_xmit(struct sk_buff *skb, struct net_device *dev
skb_push(skb, BRCM_TAG_LEN);
- memmove(skb->data, skb->data + BRCM_TAG_LEN, 2 * ETH_ALEN);
+ if (offset)
+ memmove(skb->data, skb->data + BRCM_TAG_LEN, offset);
- /* Build the tag after the MAC Source Address */
- brcm_tag = skb->data + 2 * ETH_ALEN;
+ brcm_tag = skb->data + offset;
/* Set the ingress opcode, traffic class, tag enforcment is
* deprecated
@@ -94,8 +96,17 @@ static struct sk_buff *brcm_tag_xmit(struct sk_buff *skb, struct net_device *dev
return skb;
}
-static struct sk_buff *brcm_tag_rcv(struct sk_buff *skb, struct net_device *dev,
- struct packet_type *pt)
+static struct sk_buff *brcm_tag_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ /* Build the tag after the MAC Source Address */
+ return brcm_tag_xmit_ll(skb, dev, 2 * ETH_ALEN);
+}
+
+static struct sk_buff *brcm_tag_rcv_ll(struct sk_buff *skb,
+ struct net_device *dev,
+ struct packet_type *pt,
+ unsigned int offset)
{
int source_port;
u8 *brcm_tag;
@@ -103,8 +114,7 @@ static struct sk_buff *brcm_tag_rcv(struct sk_buff *skb, struct net_device *dev,
if (unlikely(!pskb_may_pull(skb, BRCM_TAG_LEN)))
return NULL;
- /* skb->data points to the EtherType, the tag is right before it */
- brcm_tag = skb->data - 2;
+ brcm_tag = skb->data - offset;
/* The opcode should never be different than 0b000 */
if (unlikely((brcm_tag[0] >> BRCM_OPCODE_SHIFT) & BRCM_OPCODE_MASK))
@@ -126,12 +136,25 @@ static struct sk_buff *brcm_tag_rcv(struct sk_buff *skb, struct net_device *dev,
/* Remove Broadcom tag and update checksum */
skb_pull_rcsum(skb, BRCM_TAG_LEN);
+ return skb;
+}
+
+static struct sk_buff *brcm_tag_rcv(struct sk_buff *skb, struct net_device *dev,
+ struct packet_type *pt)
+{
+ struct sk_buff *nskb;
+
+ /* skb->data points to the EtherType, the tag is right before it */
+ nskb = brcm_tag_rcv_ll(skb, dev, pt, 2);
+ if (!nskb)
+ return nskb;
+
/* Move the Ethernet DA and SA */
- memmove(skb->data - ETH_HLEN,
- skb->data - ETH_HLEN - BRCM_TAG_LEN,
+ memmove(nskb->data - ETH_HLEN,
+ nskb->data - ETH_HLEN - BRCM_TAG_LEN,
2 * ETH_ALEN);
- return skb;
+ return nskb;
}
const struct dsa_device_ops brcm_netdev_ops = {
--
2.9.3
next prev parent reply other threads:[~2017-11-10 23:23 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-10 23:22 [PATCH net-next 0/4] net: dsa: b53: Support prepended Broadcom tags Florian Fainelli
2017-11-10 23:22 ` [PATCH net-next 1/4] net: dsa: Pass a port to get_tag_protocol() Florian Fainelli
2017-11-10 23:35 ` Vivien Didelot
2017-11-11 15:41 ` Andrew Lunn
2017-11-10 23:22 ` Florian Fainelli [this message]
2017-11-11 15:50 ` [PATCH net-next 2/4] net: dsa: tag_brcm: Prepare for supporting prepended tag Andrew Lunn
2017-11-10 23:22 ` [PATCH net-next 3/4] net: dsa: Support prepended Broadcom tag Florian Fainelli
2017-11-11 15:51 ` Andrew Lunn
2017-11-10 23:22 ` [PATCH net-next 4/4] net: dsa: b53: Support prepended Broadcom tags Florian Fainelli
2017-11-11 15:53 ` Andrew Lunn
2017-11-13 1:35 ` [PATCH net-next 0/4] " David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171110232255.2462-3-f.fainelli@gmail.com \
--to=f.fainelli@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=vivien.didelot@savoirfairelinux.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.