From: "Antoine Ténart" <antoine.tenart@free-electrons.com>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH/next 4/5] solidrun/macchiatobin: add new board
Date: Tue, 14 Nov 2017 10:42:37 +0100 [thread overview]
Message-ID: <20171114094237.GA4995@kwain> (raw)
In-Reply-To: <20171114092024.juocxhwoaqd7xiql@bars>
Hi Sergey,
On Tue, Nov 14, 2017 at 12:20:24PM +0300, Sergey Matyukevich wrote:
>
> Thanks for detailed summary of mcbin networking support. However it sill looks
> like there is a missing piece here. I have checked behavior of both mainline 4.14
> (516fb7f2e73dcc) and marvell-mainline devel-4.14/all (a3d9036af3c6033). I did no
> changes to kernel/dts/defconfig at all other than enabling Marvell PHYs for mainline
> kernel. But the result is still the same: 1Gb eth2 interface works with devel-4.14/all,
> but doesn't work with mainline. Though PHY is recognized and attached, mii-diag also
> provides sane report. Tx packet counter in ifconfig is increased, but no packets
> on wire.
>
> Probably I am missing something obvious. I will do more checks and comparisons
> later this week. Setup is just the same: mainline U-Boot 2017.09 and images
> built using this patchset.
Note that I never tested with the upstream U-Boot. Do the interfaces
work in U-Boot?
Antoine
--
Antoine T?nart, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
next prev parent reply other threads:[~2017-11-14 9:42 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-12 20:16 [Buildroot] [PATCH/next 0/5] Add support for MacchiatoBin board Sergey Matyukevich
2017-11-12 20:16 ` [Buildroot] [PATCH/next 1/5] armada-firmware: new package Sergey Matyukevich
2017-11-13 7:30 ` Baruch Siach
2017-11-13 19:47 ` Sergey Matyukevich
2017-11-14 22:07 ` Arnout Vandecappelle
2017-11-15 21:15 ` Sergey Matyukevich
2017-11-15 21:55 ` Arnout Vandecappelle
2017-11-12 20:16 ` [Buildroot] [PATCH/next 2/5] armada-ddr: " Sergey Matyukevich
2017-11-13 8:00 ` Baruch Siach
2017-11-13 20:12 ` Sergey Matyukevich
2017-11-12 20:16 ` [Buildroot] [PATCH/next 3/5] atf: add support for Marvell Armada SoCs Sergey Matyukevich
2017-11-13 8:23 ` Baruch Siach
2017-11-13 20:10 ` Sergey Matyukevich
2017-11-12 20:16 ` [Buildroot] [PATCH/next 4/5] solidrun/macchiatobin: add new board Sergey Matyukevich
2017-11-13 12:27 ` Baruch Siach
2017-11-13 12:51 ` Jan Kundrát
2017-11-13 13:13 ` Baruch Siach
2017-11-13 20:06 ` Sergey Matyukevich
2017-11-13 22:36 ` Thomas Petazzoni
2017-11-14 7:41 ` Antoine Ténart
2017-11-14 9:20 ` Sergey Matyukevich
2017-11-14 9:42 ` Antoine Ténart [this message]
2017-11-14 20:27 ` Sergey Matyukevich
2017-11-14 20:53 ` Antoine Ténart
2017-11-15 21:20 ` Sergey Matyukevich
2017-11-13 14:52 ` Baruch Siach
2017-11-13 19:51 ` Sergey Matyukevich
2017-11-14 19:11 ` Sergey Matyukevich
2017-11-12 20:16 ` [Buildroot] [PATCH/next 5/5] Add myself to MacchiatoBin releated packages Sergey Matyukevich
2017-11-14 21:58 ` [Buildroot] [PATCH/next 0/5] Add support for MacchiatoBin board Arnout Vandecappelle
2017-11-15 15:59 ` Baruch Siach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171114094237.GA4995@kwain \
--to=antoine.tenart@free-electrons.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.