From: Shawn Guo <shawn.guo@linaro.org>
To: Jiancheng Xue <xuejiancheng@hisilicon.com>
Cc: sboyd@codeaurora.org, mturquette@baylibre.com,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
hermit.wangheming@hisilicon.com, project-aspen-dev@linaro.org,
tianshuliang <tianshuliang@hisilicon.com>
Subject: Re: [PATCH 2/3] clk: hisilicon: add emmc sample and drive clock for hi3798cv200 SoC
Date: Thu, 16 Nov 2017 10:35:37 +0800 [thread overview]
Message-ID: <20171116023533.GJ11163@dragon> (raw)
In-Reply-To: <1508324429-6012-3-git-send-email-xuejiancheng@hisilicon.com>
On Wed, Oct 18, 2017 at 07:00:28AM -0400, Jiancheng Xue wrote:
> From: tianshuliang <tianshuliang@hisilicon.com>
>
> Add emmc sample and emmc drive clock for Hi3798cv200 SoC
>
> Signed-off-by: tianshuliang <tianshuliang@hisilicon.com>
> Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com>
> ---
> drivers/clk/hisilicon/crg-hi3798cv200.c | 25 ++++++++++++++++++++++++-
> 1 file changed, 24 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/hisilicon/crg-hi3798cv200.c b/drivers/clk/hisilicon/crg-hi3798cv200.c
> index ed8bb5f..25d750c 100644
> --- a/drivers/clk/hisilicon/crg-hi3798cv200.c
> +++ b/drivers/clk/hisilicon/crg-hi3798cv200.c
> @@ -83,6 +83,18 @@ static struct hisi_mux_clock hi3798cv200_mux_clks[] = {
> CLK_SET_RATE_PARENT, 0x188, 10, 2, 0, comphy1_mux_table, },
> };
>
> +static u32 mmc_phase_reg[] = {0, 1, 2, 3, 4, 5, 6, 7};
> +static u32 mmc_phase_val[] = {0, 45, 90, 135, 180, 225, 270, 315};
> +
> +static struct hisi_phase_clock hi3798cv200_phase_clks[] = {
> + { HISTB_MMC_SAMPLE_CLK, "mmc_sample", "clk_mmc_ciu",
> + CLK_SET_RATE_PARENT, 0xa0, 12, 3, mmc_phase_val,
> + mmc_phase_reg, ARRAY_SIZE(mmc_phase_reg)},
> + { HISTB_MMC_DRV_CLK, "mmc_drive", "clk_mmc_ciu",
> + CLK_SET_RATE_PARENT, 0xa0, 16, 3, mmc_phase_val,
> + mmc_phase_reg, ARRAY_SIZE(mmc_phase_reg)},
Can we align the indentation with other clock types, like the following?
{ HISTB_MMC_SAMPLE_CLK, "mmc_sample", "clk_mmc_ciu",
CLK_SET_RATE_PARENT, 0xa0, 12, 3, mmc_phase_val,
mmc_phase_reg, ARRAY_SIZE(mmc_phase_reg) },
Also we have a space after '{' and please do the same before '}'.
Shawn
> +};
> +
> static const struct hisi_gate_clock hi3798cv200_gate_clks[] = {
> /* UART */
> { HISTB_UART2_CLK, "clk_uart2", "75m",
> @@ -179,11 +191,18 @@ static struct hisi_clock_data *hi3798cv200_clk_register(
> if (ret)
> goto unregister_fixed_rate;
>
> + ret = hisi_clk_register_phase(&pdev->dev,
> + hi3798cv200_phase_clks,
> + ARRAY_SIZE(hi3798cv200_phase_clks),
> + clk_data);
> + if (ret)
> + goto unregister_mux;
> +
> ret = hisi_clk_register_gate(hi3798cv200_gate_clks,
> ARRAY_SIZE(hi3798cv200_gate_clks),
> clk_data);
> if (ret)
> - goto unregister_mux;
> + goto unregister_phase;
>
> ret = of_clk_add_provider(pdev->dev.of_node,
> of_clk_src_onecell_get, &clk_data->clk_data);
> @@ -201,6 +220,10 @@ static struct hisi_clock_data *hi3798cv200_clk_register(
> hisi_clk_unregister_mux(hi3798cv200_mux_clks,
> ARRAY_SIZE(hi3798cv200_mux_clks),
> clk_data);
> +unregister_phase:
> + hisi_clk_unregister_phase(hi3798cv200_phase_clks,
> + ARRAY_SIZE(hi3798cv200_phase_clks),
> + clk_data);
> unregister_gate:
> hisi_clk_unregister_gate(hi3798cv200_gate_clks,
> ARRAY_SIZE(hi3798cv200_gate_clks),
> --
> 2.7.4
>
next prev parent reply other threads:[~2017-11-16 2:35 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-18 11:00 [PATCH 0/3] add more clock definitions for hi3798cv200-poplar board Jiancheng Xue
2017-10-18 11:00 ` [PATCH 1/3] clk: hisilicon: add hisi phase clock support Jiancheng Xue
2017-11-16 2:31 ` Shawn Guo
2017-11-16 3:40 ` [project-aspen-dev] " Jiancheng Xue
2017-11-16 6:47 ` Shawn Guo
2017-10-18 11:00 ` [PATCH 2/3] clk: hisilicon: add emmc sample and drive clock for hi3798cv200 SoC Jiancheng Xue
2017-11-16 2:35 ` Shawn Guo [this message]
2017-10-18 11:00 ` [PATCH 3/3] clk: hisilicon: correct ir clock rate " Jiancheng Xue
2017-11-16 0:54 ` [PATCH 0/3] add more clock definitions for hi3798cv200-poplar board Shawn Guo
2017-11-16 22:17 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171116023533.GJ11163@dragon \
--to=shawn.guo@linaro.org \
--cc=hermit.wangheming@hisilicon.com \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=project-aspen-dev@linaro.org \
--cc=sboyd@codeaurora.org \
--cc=tianshuliang@hisilicon.com \
--cc=xuejiancheng@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.