All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lukasz Majewski <lukma@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [RFC PATCH 04/10] env: Pass additional parameters to the env lookup function
Date: Fri, 17 Nov 2017 10:19:36 +0100	[thread overview]
Message-ID: <20171117101936.008a40e7@jawa> (raw)
In-Reply-To: <20171116092231.27740-5-maxime.ripard@free-electrons.com>

On Thu, 16 Nov 2017 10:22:25 +0100
Maxime Ripard <maxime.ripard@free-electrons.com> wrote:

> In preparation for the multiple environment support, let's introduce
> two new parameters to the environment driver lookup function: the
> priority and operation.
> 
> The operation parameter is meant to identify, obviously, the
> operation you might want to perform on the environment.
> 
> The priority is a number passed to identify the environment priority
> you want to retrieve. The lowest priority parameter (0) will be the
> primary source.
> 
> Combining the two parameters allow you to support multiple
> environments through different priorities, and to change those
> priorities between read and writes operations.
> 
> This is especially useful to implement migration mechanisms where you
> want to always use the same environment first, be it to read or
> write, while the common case is more likely to use the same
> environment it has read from to write it to.
> 
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> ---
>  env/env.c             | 122
> ++++++++++++++++++++++++++++++--------------------
> include/environment.h |   7 +++ 2 files changed, 80 insertions(+), 49
> deletions(-)
> 
> diff --git a/env/env.c b/env/env.c
> index 97ada5b5a6fd..673bfa6ba41b 100644
> --- a/env/env.c
> +++ b/env/env.c
> @@ -26,8 +26,11 @@ static struct env_driver *_env_driver_lookup(enum
> env_location loc) return NULL;
>  }
>  
> -static enum env_location env_get_location(void)
> +static enum env_location env_get_location(enum env_operation op, int
> prio) {
> +	if (prio >= 1)
> +		return ENVL_UNKNOWN;

Is this correct? 

Above you mentioned that prio = 0 is the default.

With this condition you may only allow prio <= 0...

> +
>  	if IS_ENABLED(CONFIG_ENV_IS_IN_EEPROM)
>  		return ENVL_EEPROM;
>  	else if IS_ENABLED(CONFIG_ENV_IS_IN_FAT)
> @@ -52,11 +55,14 @@ static enum env_location env_get_location(void)
>  		return ENVL_UNKNOWN;
>  }
>  
> -static struct env_driver *env_driver_lookup(void)
> +static struct env_driver *env_driver_lookup(enum env_operation op,
> int prio) {
> -	enum env_location loc = env_get_location();
> +	enum env_location loc = env_get_location(op, prio);
>  	struct env_driver *drv;
>  
> +	if (loc == ENVL_UNKNOWN)
> +		return NULL;
> +
>  	drv = _env_driver_lookup(loc);
>  	if (!drv) {
>  		debug("%s: No environment driver for location %d\n",
> __func__, @@ -69,83 +75,101 @@ static struct env_driver
> *env_driver_lookup(void) 
>  int env_get_char(int index)
>  {
> -	struct env_driver *drv = env_driver_lookup();
> -	int ret;
> +	struct env_driver *drv;
> +	int prio;
>  
>  	if (gd->env_valid == ENV_INVALID)
>  		return default_environment[index];
> -	if (!drv)
> -		return -ENODEV;
> -	if (!drv->get_char)
> -		return *(uchar *)(gd->env_addr + index);
> -	ret = drv->get_char(index);
> -	if (ret < 0) {
> -		debug("%s: Environment failed to load (err=%d)\n",
> -		      __func__, ret);
> +
> +	for (prio = 0; (drv = env_driver_lookup(ENVO_GET_CHAR,
> prio)); prio++) {
> +		int ret;
> +
> +		if (!drv->get_char)
> +			continue;
> +
> +		ret = drv->get_char(index);
> +		if (!ret)
> +			return 0;
> +
> +		debug("%s: Environment %s failed to load
> (err=%d)\n", __func__,
> +		      drv->name, ret);
>  	}
>  
> -	return ret;
> +	return -ENODEV;
>  }
>  
>  int env_load(void)
>  {
> -	struct env_driver *drv = env_driver_lookup();
> -	int ret = 0;
> +	struct env_driver *drv;
> +	int prio;
>  
> -	if (!drv)
> -		return -ENODEV;
> -	if (!drv->load)
> -		return 0;
> -	ret = drv->load();
> -	if (ret) {
> -		debug("%s: Environment failed to load (err=%d)\n",
> __func__,
> -		      ret);
> -		return ret;
> +	for (prio = 0; (drv = env_driver_lookup(ENVO_LOAD, prio));
> prio++) {
> +		int ret;
> +
> +		if (!drv->load)
> +			continue;
> +
> +		ret = drv->load();
> +		if (!ret)
> +			return 0;
> +
> +		debug("%s: Environment %s failed to load
> (err=%d)\n", __func__,
> +		      drv->name, ret);
>  	}
>  
> -	return 0;
> +	return -ENODEV;
>  }
>  
>  int env_save(void)
>  {
> -	struct env_driver *drv = env_driver_lookup();
> -	int ret;
> +	struct env_driver *drv;
> +	int prio;
>  
> -	if (!drv)
> -		return -ENODEV;
> -	if (!drv->save)
> -		return -ENOSYS;
> -
> -	printf("Saving Environment to %s...\n", drv->name);
> -	ret = drv->save();
> -	if (ret) {
> -		debug("%s: Environment failed to save (err=%d)\n",
> __func__,
> -		      ret);
> -		return ret;
> +	for (prio = 0; (drv = env_driver_lookup(ENVO_SAVE, prio));
> prio++) {
> +		int ret;
> +
> +		if (!drv->save)
> +			continue;
> +
> +		printf("Saving Environment to %s...\n", drv->name);
> +		ret = drv->save();
> +		if (!ret)
> +			return 0;
> +
> +		debug("%s: Environment %s failed to save
> (err=%d)\n", __func__,
> +		      drv->name, ret);
>  	}
>  
> -	return 0;
> +	return -ENODEV;
>  }
>  
>  int env_init(void)
>  {
> -	struct env_driver *drv = env_driver_lookup();
> +	struct env_driver *drv;
>  	int ret = -ENOENT;
> +	int prio;
> +
> +	for (prio = 0; (drv = env_driver_lookup(ENVO_INIT, prio));
> prio++) {
> +		if (!drv->init)
> +			continue;
>  
> -	if (!drv)
> -		return -ENODEV;
> -	if (drv->init)
>  		ret = drv->init();
> +		if (!ret)
> +			return 0;
> +
> +		debug("%s: Environment %s failed to init
> (err=%d)\n", __func__,
> +		      drv->name, ret);
> +	}
> +
> +	if (!prio)
> +		return -ENODEV;
> +
>  	if (ret == -ENOENT) {
>  		gd->env_addr = (ulong)&default_environment[0];
>  		gd->env_valid = ENV_VALID;
>  
>  		return 0;
> -	} else if (ret) {
> -		debug("%s: Environment failed to init (err=%d)\n",
> __func__,
> -		      ret);
> -		return ret;
>  	}
>  
> -	return 0;
> +	return ret;
>  }
> diff --git a/include/environment.h b/include/environment.h
> index 226e3ef2d23a..7fa8b98cc0db 100644
> --- a/include/environment.h
> +++ b/include/environment.h
> @@ -215,6 +215,13 @@ enum env_location {
>  	ENVL_UNKNOWN,
>  };
>  
> +enum env_operation {
> +	ENVO_GET_CHAR,
> +	ENVO_INIT,
> +	ENVO_LOAD,
> +	ENVO_SAVE,
> +};
> +
>  struct env_driver {
>  	const char *name;
>  	enum env_location location;



Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171117/2672c739/attachment.sig>

  reply	other threads:[~2017-11-17  9:19 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-16  9:22 [U-Boot] [RFC PATCH 00/10] env: Multiple env support and env transition for sunxi Maxime Ripard
2017-11-16  9:22 ` [U-Boot] [RFC PATCH 01/10] cmd: nvedit: Get rid of the env lookup Maxime Ripard
2017-11-17  9:12   ` Lukasz Majewski
2017-11-16  9:22 ` [U-Boot] [RFC PATCH 02/10] env: Make env_driver_lookup_default private Maxime Ripard
2017-11-17  9:13   ` Lukasz Majewski
2017-11-20  9:53   ` Andre Przywara
2017-11-16  9:22 ` [U-Boot] [RFC PATCH 03/10] env: Rename env_driver_lookup_default and env_get_default_location Maxime Ripard
2017-11-17  9:14   ` Lukasz Majewski
2017-11-16  9:22 ` [U-Boot] [RFC PATCH 04/10] env: Pass additional parameters to the env lookup function Maxime Ripard
2017-11-17  9:19   ` Lukasz Majewski [this message]
2017-11-24  9:20   ` Quentin Schulz
2017-11-16  9:22 ` [U-Boot] [RFC PATCH 05/10] env: Make the env save message a bit more explicit Maxime Ripard
2017-11-17  9:20   ` Lukasz Majewski
2017-11-16  9:22 ` [U-Boot] [RFC PATCH 06/10] env: Support multiple environments Maxime Ripard
2017-11-17  9:24   ` Lukasz Majewski
2017-11-17 13:41     ` Tom Rini
2017-11-17 14:00       ` Lukasz Majewski
2017-11-17 14:19         ` Maxime Ripard
2017-11-17 14:40           ` Lukasz Majewski
2017-11-17 17:07             ` Maxime Ripard
2017-11-16  9:22 ` [U-Boot] [RFC PATCH 07/10] env: Allow to build multiple environments in Kconfig Maxime Ripard
2017-11-17  9:25   ` Lukasz Majewski
2017-11-16  9:22 ` [U-Boot] [RFC PATCH 08/10] env: Mark env_get_location as weak Maxime Ripard
2017-11-17  9:26   ` Lukasz Majewski
2017-11-16  9:22 ` [U-Boot] [RFC PATCH 09/10] sunxi: Transition from the MMC to a FAT-based environment Maxime Ripard
2017-11-17  9:27   ` Lukasz Majewski
2017-11-16  9:22 ` [U-Boot] [RFC PATCH 10/10] env: sunxi: Enable FAT-based environment support by default Maxime Ripard
2017-11-17  9:27   ` Lukasz Majewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171117101936.008a40e7@jawa \
    --to=lukma@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.