[Qemu-devel] [PATCH 11/12] ppc: add mvme3100 machine

[Michael Davidsaver <mdavidsaver@gmail.com>]

Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
---
 hw/ppc/Makefile.objs   |   1 +
 hw/ppc/mvme3100.c      | 688 +++++++++++++++++++++++++++++++++++++++++++++++++
 hw/ppc/mvme3100_cpld.c | 192 ++++++++++++++
 3 files changed, 881 insertions(+)
 create mode 100644 hw/ppc/mvme3100.c
 create mode 100644 hw/ppc/mvme3100_cpld.c

diff --git a/hw/ppc/Makefile.objs b/hw/ppc/Makefile.objs
index c1a63d0c39..c1118aaa42 100644
--- a/hw/ppc/Makefile.objs
+++ b/hw/ppc/Makefile.objs
@@ -26,5 +26,6 @@ obj-$(CONFIG_MAC) += mac_newworld.o
 obj-$(CONFIG_E500) += e500.o mpc8544ds.o e500plat.o
 obj-$(CONFIG_E500) += ppce500_spin.o
 obj-$(CONFIG_E500) += e500_ccsr.o
+obj-$(CONFIG_E500) += mvme3100.o mvme3100_cpld.o
 # PowerPC 440 Xilinx ML507 reference board.
 obj-$(CONFIG_XILINX) += virtex_ml507.o
diff --git a/hw/ppc/mvme3100.c b/hw/ppc/mvme3100.c
new file mode 100644
index 0000000000..2e6d428533
--- /dev/null
+++ b/hw/ppc/mvme3100.c
@@ -0,0 +1,688 @@
+/*
+ * MVME3100 board emulation
+ *
+ * Copyright (c) 2015 Michael Davidsaver
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.  See
+ * the LICENSE file in the top-level directory.
+ *
+ * This model was developed according to the
+ * MVME3100 Single Board Computer Programmer's Reference
+ * P/N: 6806800G37B
+ * July 2014
+ *
+ * mvme3100-1152
+ *   677MHz core, 256MB ram, 64MB flash
+ * mvme3100-1263
+ *   833MHz core, 512MB ram, 128MB flash
+ *
+ * MOTLoad on mvme3100-1152 says:
+ *   MPU-Type             =MPC8540
+ *   MPU-Int Clock Speed  =666MHz
+ *   MPU-CCB Clock Speed  =333MHz
+ *   MPU-DDR Clock Speed  =166MHz
+ *   MPU-PCI Clock Speed  =66MHz, PCI, 64-bit
+ *   MPU-Int Cache(L2) Enabled, 256KB, L2CTL =A8000300
+ *   Reset/Boot Vector    =Flash0
+ *   Local Memory Found   =10000000 (&268435456)
+ *
+ * MOTLoad on mvme3100-1263 says:
+ *   MPU-Type             =MPC8540
+ *   MPU-Int Clock Speed  =833MHz
+ *   MPU-CCB Clock Speed  =333MHz
+ *   MPU-DDR Clock Speed  =166MHz
+ *   MPU-PCI Clock Speed  =66MHz, PCI, 64-bit
+ *   MPU-Int Cache(L2) Enabled, 256KB, L2CTL =A8000300
+ *   Reset/Boot Vector    =Flash0
+ *   Local Memory Found   =20000000 (&536870912)
+ *
+ * Clock ratios
+ *   CCB/PCI  -> 5/1
+ *   core/CCB -> 2/1 (-1152)
+ *            -> 5/2 (-1263)
+ *
+ * The overall memory map is determined by the Local Address Windows.
+ * We do not model the LAWs explicitly.
+ *
+ * MOTLoad configures as follows (a super set of table 1-4)
+ *   (MOTLoad RTOS Version 2.0,  PAL Version 1.2 RM04)
+ * LAW 0, 7 - disabled
+ * LAW 1 - 0x00000000 -> 0x7fffffff - RAM 2G
+ * LAW 2 - 0x80000000 -> 0xbfffffff - PCI 1G
+ * LAW 3 - 0xc0000000 -> 0xdfffffff - PCI 512MB
+ * LAW 4 - 0xe0000000 -> 0xe0ffffff - PCI 16MB
+ * gap   - 0xe1000000 -> 0xbfffffff - CCSR @ 0xe1000000
+ * LAW 5 - 0xe2000000 -> 0xe2ffffff - LBC 16MB
+ * gap   - 0xe3000000 -> 0xefffffff
+ * LAW 6 - 0xf0000000 -> 0xffffffff - LBC 256MB
+ *
+ * And validated against the RTEMS 4.9.6 mvme3100 BSP
+ */
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "qapi/error.h"
+#include "qapi/visitor.h"
+#include "e500.h"
+#include "cpu.h"
+#include "qemu-common.h"
+#include "cpu-qom.h"
+#include "sysemu/sysemu.h"
+#include "sysemu/dma.h"
+#include "sysemu/block-backend.h"
+#include "hw/loader.h"
+#include "hw/pci/pci.h"
+#include "hw/boards.h"
+#include "hw/ppc/ppc.h"
+#include "hw/net/fsl_etsec/etsec.h"
+#include "sysemu/device_tree.h"
+#include "sysemu/qtest.h"
+#include "hw/ppc/openpic.h"
+#include "qemu/error-report.h"
+
+/* Same as prep.c and other PPC boards */
+#define CFG_ADDR 0xf0000510
+
+#define TYPE_MVME3100 MACHINE_TYPE_NAME("mvme3100")
+#define MVME3100(obj) OBJECT_CHECK(MVME3100State, (obj), TYPE_MVME3100)
+#define MVME3100_GET_CLASS(obj) \
+    OBJECT_GET_CLASS(MVME3100Class, (obj), TYPE_MVME3100)
+#define MVME3100_CLASS(klass) \
+    OBJECT_CLASS_CHECK(MVME3100Class, (klass), TYPE_MVME3100)
+
+
+typedef struct mvme3100_info {
+    const char *desc;
+    uint32_t cpu_freq;
+    uint32_t porpllsr;
+    uint32_t ram_size;
+} mvme3100_info;
+
+typedef struct MVME3100Class {
+    /*< private >*/
+    MachineClass parent_class;
+    /*< public >*/
+
+    const mvme3100_info *info;
+} MVME3100Class;
+
+typedef struct MVME3100State {
+    /*< private >*/
+    MachineState parent_obj;
+    /*< public >*/
+
+    uint32_t load_address,
+             entry_address;
+} MVME3100State;
+
+
+/* motload "global environment" variables */
+static
+const char *gev[] = {
+        /* TODO: somehow snoop in slirp_instances to pick up IP config? */
+        "mot-/dev/enet0-cipa=10.0.2.15",
+        "mot-/dev/enet0-gipa=10.0.2.2",
+        "mot-/dev/enet0-snma=255.255.255.0",
+        "mot-/dev/enet0-sipa=10.0.2.2",
+        /* RTEMS specific names for things motload doesn't have */
+        "rtems-dns-server=10.0.2.3",
+        "rtems-client-name=qemu",
+        NULL,
+};
+
+/* Prepare Motorola Vital Product Data eeprom image.
+ * Provided to bootloader for use as a default.
+ *
+ * Begins with constant "MOTLOAD" followed by variable length records
+ * with a two byte header (ID code then body length in bytes).
+ *
+ * | ID | Length | body .... | repeated until ID=0xFF
+ *
+ * ID Codes:
+ *  1 - Product ID (string)
+ *  2 - Assembly # (string)
+ *  3 - Serial # (string)
+ *  5 - CPU Speed (Hz, 4 byte integer + 1 nil)
+ *  6 - Bus Speed (Hz, 4 byte integer + 1 nil)
+ *  8 - Ethernet MAC (6 bytes + 1 nil)
+ *  9 - CPU type
+ *  A - VPD CRC (4 bytes)
+ *  B - Flash Config (??)
+ *  E - L2 Cache Config (??)
+ *  F - VPD Version (4 bytes)
+ * 19 - L3 Cache Config (??)
+ * FF - End of VPD (size zero)
+ *
+ * Repeat entries for repeated units.  eg. two ID=0x8 for two NICs
+ *
+ * MOTLoad uses the same eeprom to hold it's user configuration
+ * Global Environment Variable (GEV) list.
+ */
+typedef struct vpdeeprom {
+    char * const base;
+    char *cur;
+    size_t total;
+} vpdeeprom;
+
+static
+void append_gev_vpd(vpdeeprom *vpd, const char *str)
+{
+    const size_t remaining = vpd->total - (vpd->cur - vpd->base),
+                 len = strlen(str);
+
+    if ((len == 0 && remaining < 1)
+            || (remaining < len + 2))
+    {
+        fprintf(stderr, "VPD GEV overflow\n");
+        return;
+    }
+
+    memcpy(vpd->cur, str, len + 1);
+
+    vpd->cur += len + 1;
+}
+
+static
+void append_vpd(vpdeeprom *vpd, uint8_t id, size_t cnt, const void *val)
+{
+    const size_t remaining = vpd->total - (vpd->cur - vpd->base);
+
+    /* must have enough space for this entry and final ID=0xff */
+    if ((id == 0xff && remaining < 2)
+            || (remaining + 4 < cnt || cnt > 255))
+    {
+        fprintf(stderr, "VPD overflow\n");
+        return;
+    }
+
+    vpd->cur[0] = id;
+    vpd->cur[1] = cnt;
+    memcpy(vpd->cur + 2, val, cnt);
+
+    vpd->cur += 2 + cnt;
+}
+
+static
+void append_string_vpd(vpdeeprom *vpd, uint8_t id, const char *str)
+{
+    /* include trailing nil */
+    append_vpd(vpd, id, strlen(str) + 1, str);
+}
+
+static
+void append_mac_vpd(vpdeeprom *vpd, uint8_t id, const MACAddr *addr)
+{
+    char buf[7];
+    memcpy(buf, addr->a, 6);
+    buf[6] = 0;
+
+    append_vpd(vpd, id, 7, buf);
+}
+
+static
+void append_u32_vpd(vpdeeprom *vpd, uint8_t id, uint32_t val)
+{
+    union {
+        uint32_t ival;
+        char bytes[5]; /* include trailing nil */
+    } buf;
+    buf.ival = cpu_to_be32(val);
+    buf.bytes[4] = 0;
+
+    append_vpd(vpd, id, 5, buf.bytes);
+}
+
+static
+void build_vpd(const mvme3100_info *info, char *buf, size_t cnt,
+               const char *extra)
+{
+    vpdeeprom vpd = {buf, buf, cnt};
+    size_t i;
+
+    memset(buf, 0, cnt);
+
+    strcpy(buf, "MOTOROLA");
+    vpd.cur += 8;
+
+    /* Product ID (eg. "MVME3100-1152") */
+    append_string_vpd(&vpd, 1, info->desc);
+
+    /* serial number */
+    append_string_vpd(&vpd, 3, "E0120000");
+
+    /* CPU Freq. */
+    append_u32_vpd(&vpd, 5, info->cpu_freq);
+
+    /* PCI Bus Freq. */
+    append_u32_vpd(&vpd, 6, 66666666);
+
+    for (i = 0; i < MAX_NICS; i++) {
+        if (nd_table[i].used) {
+            append_mac_vpd(&vpd, 8, &nd_table[i].macaddr);
+        }
+    }
+
+    append_vpd(&vpd, 0xff, 0, NULL);
+
+    if (vpd.cur - vpd.base > 0x10f8) {
+        fprintf(stderr, "VPD overflows GEV area.\n");
+        return;
+    }
+
+    /* MOTLOAD's Global Environment Variables
+     * start at offset 0x10f8.
+     * This is a set of nil terminated strings of the form "name=value"
+     * with a zero length string signaling the end.
+     */
+    vpd.cur = vpd.base + 0x10f8;
+
+    for (i = 0; gev[i]; i++) {
+        append_gev_vpd(&vpd, gev[i]);
+    }
+
+    if (extra) {
+        char *E = g_strdup(extra);
+        char **opts = g_strsplit(E, " ", 0);
+        size_t i;
+
+        g_free(E);
+
+        for (i = 0; opts[i]; i++) {
+            char *opt = g_strstrip(opts[i]);
+            size_t olen = strlen(opt);
+
+            if (olen == 0) {
+                continue;
+            } else if (!strchr(opt, '=')) {
+                fprintf(stderr, "Missing '=' in -append %s\n", extra);
+                continue;
+            }
+
+            append_gev_vpd(&vpd, opt);
+        }
+
+        g_strfreev(opts);
+    }
+
+    /* zero length string signals end */
+    append_gev_vpd(&vpd, "");
+}
+
+static void mvme3100_fixup_devtree(PPCE500Params *params, void *fdt)
+{
+    (void)params;
+    (void)fdt;
+}
+
+static
+void set_map(CPUPPCState *env, unsigned way,
+             target_ulong va, hwaddr pa,
+             unsigned size)
+{
+    ppcmas_tlb_t *tlb = booke206_get_tlbm(env, 1, 0, way);
+
+    tlb->mas1 = MAS1_VALID | (size << MAS1_TSIZE_SHIFT);
+    tlb->mas2 = (va & TARGET_PAGE_MASK) | MAS2_I | MAS2_G;
+    tlb->mas7_3 = (pa & TARGET_PAGE_MASK) | MAS3_SR | MAS3_SW | MAS3_SX;
+}
+
+static
+void remap_tlb_bare(CPUPPCState *env)
+{
+    /* The MPC8540 ref. manual says only the upper 4KB (ROM)
+     * is mapped, but doesn't say exactly how this mapping
+     * is setup.  So we arbitrarily decide to use TLB1 entry 0.
+     */
+    set_map(env, 0, 0xfffff000, 0xfffff000, 0x02);
+
+    env->tlb_dirty = true;
+}
+
+/* runs after ppce500_cpu_reset() */
+static void mvme3100_cpu_reset(void *opaque)
+{
+    PowerPCCPU *cpu = opaque;
+    CPUPPCState *env = &cpu->env;
+
+    /* We don't model HID0 functions.
+     * HID0[EMCP] (32) and HID0[TBEN] (TBEN) set
+     */
+    env->spr[SPR_HID0] = 0x80004000;
+
+    remap_tlb_bare(&cpu->env);
+    env->nip = 0xfffffffc;
+}
+
+/* PCI config from a real mvme3100 as configured by motload
+ *
+ *  BUS:SLOT:FUN  VENDOR-DEV_ID: COMMAND STATUS BASE_ADDR0 BASE_ADDR1 IRQ_PIN -> IRQ_LINE
+ *  0:0x00:0    0x1057-0x0008:  0x0006 0x20B0 0x80000000 0x00000000       0 ->   0 (=0x00)
+ *  0:0x11:0    0x10E3-0x0148:  0x0146 0x02B0 0x80100004 0x00000000       1 ->   0 (=0x00)
+ *  0:0x12:0    0x10B5-0x6520:  0x0147 0x02B0 0x00000000 0x00000000       0 ->   0 (=0x00)
+ *  0:0x13:0    0x10B5-0x6520:  0x0147 0x02B0 0x00000000 0x00000000       0 ->   0 (=0x00)
+ *  0:0x14:0    0x8086-0x3200:  0x0145 0x02B0 0x00012001 0x00013001       1 ->   2 (=0x02)
+ *  2:0x00:0    0x1033-0x0035:  0x0146 0x0210 0x80300000 0x00000000       1 ->   4 (=0x04)
+ *  2:0x00:1    0x1033-0x0035:  0x0146 0x0210 0x80301000 0x00000000       2 ->   5 (=0x05)
+ *
+ * The modeled PCI host bridge differs.
+ *
+ * We don't model:
+ * # The SATA controller GD31244 (0x8086-0x3200)
+ * # The USB (OHCI) controller uPD740101 (0x1033-0x0035)
+ *
+ * (Note that the SATA controller found on newer boards is different)
+ */
+
+static void mvme3100_init(MachineState *machine)
+{
+    /* Config based on system state from MOTLoad, not power on */
+    static
+    PPCE500Params params = {
+        .pci_first_slot = 0,
+        .pci_nr_slots = 5,
+        .fixup_devtree = mvme3100_fixup_devtree,
+        .mpic_version = OPENPIC_MODEL_FSL_MPIC_20,
+        .ccsrbar_base = 0xff700000ULL,
+        .pci_mmio_base = 0x80000000ULL,
+        .pci_mmio_bus_base = 0x80000000ULL,
+        .pci_pio_base = 0xE0000000ULL,
+        .spin_base = 0xE3000000ULL, /* not used */
+        .skip_load = 1,
+        .tsec_nic = true,
+        /* .porpllsr set from mvme3100_info */
+        /* Decrementor frequency actually controlled by HID0[SEL_TBCLK]
+         * or disabled by HID0[TBEN].
+         * We don't model and assume always enabled with CCB/8
+         */
+        .decrementor_freq = 41666666,
+    };
+    MVME3100State *mvme3100 = MVME3100(machine);
+    const mvme3100_info *info;
+    DeviceState *dev;
+    BusState *i2c;
+    SysBusDevice *cpld, *ccsr, *pic;
+    FWCfgState *fwinfo;
+    DriveInfo *drvinfo;
+
+    {
+        MVME3100Class *klass = MVME3100_GET_CLASS(machine);
+        info = klass->info;
+    }
+    params.porpllsr = info->porpllsr;
+
+    /* Setup CPU */
+    ppce500_init(machine, &params);
+
+    qemu_register_reset(mvme3100_cpu_reset, POWERPC_CPU(first_cpu));
+
+    pic = SYS_BUS_DEVICE(object_resolve_path("/machine/pic", NULL));
+    ccsr = SYS_BUS_DEVICE(object_resolve_path("/machine/e500-ccsr", NULL));
+
+    /* Setup mvme3100 specific CPLD device */
+    cpld = SYS_BUS_DEVICE(qdev_create(NULL, "mvme3100-cpld"));
+    object_property_add_child(qdev_get_machine(), "cpld",
+                              OBJECT(cpld), &error_fatal);
+    qdev_init_nofail(DEVICE(cpld));
+
+    memory_region_add_subregion(get_system_memory(),
+                                0xe2000000,
+                                sysbus_mmio_get_region(cpld, 0));
+
+    fwinfo = fw_cfg_init_mem(CFG_ADDR, CFG_ADDR + 2);
+    fw_cfg_add_i16(fwinfo, FW_CFG_NB_CPUS, 1);
+    fw_cfg_add_i16(fwinfo, FW_CFG_MAX_CPUS, 1);
+    fw_cfg_add_i64(fwinfo, FW_CFG_RAM_SIZE, machine->ram_size);
+
+    /* I2C Controller */
+    dev = DEVICE(object_resolve_path("/machine/i2c[0]", NULL));
+    assert(dev);
+    sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0,
+                       qdev_get_gpio_in(DEVICE(pic), 16 + 27));
+    i2c = qdev_get_child_bus(dev, "bus");
+    assert(i2c);
+
+    dev = DEVICE(object_resolve_path("/machine/pci-host", NULL));
+    assert(dev);
+    /*TODO: add pci-to-pci bridge and fix host bridge IRQ mappings
+     *      to start from IRQ4
+     */
+
+    /* NIC */
+    if (nd_table[0].used) {
+        qemu_check_nic_model(&nd_table[0], "eTSEC");
+
+        dev = etsec_create(0x24000,
+                           sysbus_mmio_get_region(ccsr, 0),
+                           &nd_table[0],
+                qdev_get_gpio_in(DEVICE(pic), 16 + 13),
+                qdev_get_gpio_in(DEVICE(pic), 16 + 14),
+                qdev_get_gpio_in(DEVICE(pic), 16 + 18));
+
+    } else if (nd_table[1].used) {
+        qemu_check_nic_model(&nd_table[1], "eTSEC");
+
+        dev = etsec_create(0x25000,
+                           sysbus_mmio_get_region(ccsr, 0),
+                           &nd_table[1],
+                sysbus_get_connected_irq(pic, 16 + 19),
+                sysbus_get_connected_irq(pic, 16 + 20),
+                sysbus_get_connected_irq(pic, 16 + 23));
+    }
+
+    /* VPD EEPROM */
+    dev = qdev_create(i2c, "at24c-eeprom");
+    object_property_add_child(qdev_get_machine(), "vpd", OBJECT(dev),
+                              &error_fatal);
+    qdev_prop_set_uint8(dev, "address", 0xa8 >> 1);
+    qdev_prop_set_uint32(dev, "rom-size", 8192 * 8);
+
+    drvinfo = drive_get(IF_PFLASH, 0, 0);
+    if (drvinfo) {
+        qdev_prop_set_drive(dev, "drive", blk_by_legacy_dinfo(drvinfo),
+                            &error_fatal);
+    }
+
+    qdev_init_nofail(dev);
+
+    {
+        char *buf;
+
+        buf = g_malloc0(8192 * 8);
+
+        build_vpd(info, buf, 8192 * 8, machine->kernel_cmdline);
+
+        fw_cfg_add_file(fwinfo, "tomload/vpd", buf, 8192 * 8);
+    }
+
+    /* DS1375 RTC */
+    dev = qdev_create(i2c, "ds1375");
+    object_property_add_child(qdev_get_machine(), "rtc", OBJECT(dev),
+                              &error_fatal);
+    qdev_prop_set_uint8(dev, "address", 0xd0 >> 1);
+    qdev_init_nofail(dev);
+
+    /* TODO: unmodeled i2c devices.
+     * 0x90 - ds1621 temperature sensor
+     * 0xa0 - 256*8 byte DDR SPD (???)
+     * 0xa4 - 64k*8 byte eeprom for "user" configuration
+     * 0xa6 - 64k*8 byte eeprom for "user" configuration
+     * 0xaa -  8k*8 byte eeprom for VPD of rear expansion card
+     */
+
+    if (!bios_name) {
+        bios_name = "tomload.bin";
+    }
+
+    if (!qtest_enabled()) {
+        MemoryRegion *rom = g_malloc0(sizeof(*rom));
+        char *fullname = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
+
+        if (!fullname) {
+            fprintf(stderr, "qemu: could not find bios file '%s'\n",
+                    bios_name);
+            exit(1);
+        }
+
+        memory_region_init_ram(rom, OBJECT(cpld), "rom",
+                               0x800000, &error_fatal);
+
+        memory_region_add_subregion(get_system_memory(),
+                                    0xff800000, rom);
+
+        /* BIOS == image in rom (last 8MB of address space).
+         * Execution starts with the final word 0xfffffffc
+         */
+        int bsize = get_image_size(fullname);
+        if (bsize != 8 * 1024 * 1024 ||
+                -1 == load_image_targphys(fullname,
+                                          0xff800000, 8 * 1024 * 1024))
+        {
+            fprintf(stderr, "qemu: could not load bios file '%s'"
+                            " (%u bytes, requires 8MB)\n",
+                    fullname, (unsigned)bsize);
+            exit(1);
+        }
+
+        memory_region_set_readonly(rom, true);
+
+        g_free(fullname);
+    }
+
+    {
+        hwaddr image_addr = mvme3100->load_address;
+
+        int image_size = load_image_targphys(machine->kernel_filename,
+                                             image_addr, 0x01000000);
+        if (machine->kernel_filename &&
+                -1 == image_size)
+        {
+            fprintf(stderr, "qemu: could not load file '%s'\n",
+                    machine->kernel_filename);
+            exit(1);
+
+        } else if (mvme3100->entry_address == 0) {
+            mvme3100->entry_address = image_addr;
+
+        } else if (mvme3100->entry_address < image_addr
+                  || mvme3100->entry_address >= image_addr + image_size)
+        {
+            fprintf(stderr, "qemu: entry-address out of range\n");
+            exit(1);
+        }
+
+        if (machine->kernel_cmdline) {
+            fw_cfg_add_i32(fwinfo, FW_CFG_CMDLINE_SIZE,
+                           strlen(machine->kernel_cmdline) + 1);
+            fw_cfg_add_string(fwinfo, FW_CFG_CMDLINE_DATA,
+                              machine->kernel_cmdline);
+        }
+
+        fw_cfg_add_i32(fwinfo, FW_CFG_KERNEL_ADDR, image_addr);
+        fw_cfg_add_i32(fwinfo, FW_CFG_KERNEL_ENTRY, mvme3100->entry_address);
+        fw_cfg_add_i32(fwinfo, FW_CFG_KERNEL_SIZE, image_size);
+    }
+}
+
+static void mvme3100_inst_init(Object *obj)
+{
+    MVME3100State *mvme3100 = MVME3100(obj);
+    mvme3100->load_address = 0x10000;
+    mvme3100->entry_address = 0;
+}
+
+static void mvme3100_visit_addr(Object *obj,
+                                Visitor *v,
+                                const char *name,
+                                void *opaque,
+                                Error **errp)
+{
+    MVME3100State *mvme3100 = MVME3100(obj);
+    uint32_t *ptr;
+
+    if (strcmp(name, "load-address") == 0) {
+        ptr = &mvme3100->load_address;
+    } else if (strcmp(name, "entry-address") == 0) {
+        ptr = &mvme3100->entry_address;
+    } else {
+        fprintf(stderr, "logic error: mvme3100 has no prop '%s'\n", name);
+        exit(1);
+    }
+
+    visit_type_uint32(v, name, ptr, errp);
+}
+
+static void ppce500_machine_class_init(ObjectClass *klass, void *raw)
+{
+    mvme3100_info *info = raw;
+    MachineClass *mc = MACHINE_CLASS(klass);
+    MVME3100Class *m3c = MVME3100_CLASS(klass);
+
+    m3c->info = info;
+
+    mc->desc = info->desc;
+    mc->init = mvme3100_init;
+    mc->max_cpus = 1;
+    mc->default_ram_size = info->ram_size;
+    mc->default_cpu_type = POWERPC_CPU_TYPE_NAME("mpc8540_v21");
+
+    object_class_property_add(OBJECT_CLASS(mc), "load-address", "uint32",
+                              &mvme3100_visit_addr, &mvme3100_visit_addr, NULL,
+                              NULL, &error_fatal);
+    object_class_property_add(OBJECT_CLASS(mc), "entry-address", "uint32",
+                              &mvme3100_visit_addr, &mvme3100_visit_addr, NULL,
+                              NULL, &error_fatal);
+}
+
+static const TypeInfo mvme3100_type = {
+    .abstract = true,
+    .name = TYPE_MVME3100,
+    .parent = TYPE_MACHINE,
+    .instance_size = sizeof(MVME3100State),
+    .instance_init = mvme3100_inst_init,
+    .class_size = sizeof(MVME3100Class),
+};
+
+static mvme3100_info mvme3100_1152 = {
+    .desc = "MVME3100-1152",
+    .cpu_freq = 666666666u,
+    /* CCB/PCI  -> 5/1
+     * core/CCB -> 2/1
+     *
+     * plat ratio = 5 -> 5:1 CCB:PCI
+     * e500 ratio = 4 -> 4:1 e500:CCB
+     */
+    .porpllsr = 0x0004000a,
+    .ram_size = 256 * (1 << 20),
+};
+
+static const TypeInfo mvme3100_1152_type = {
+    .name = MACHINE_TYPE_NAME("mvme3100-1152"),
+    .parent = TYPE_MVME3100,
+    .class_init = ppce500_machine_class_init,
+    .class_data = &mvme3100_1152,
+};
+
+static mvme3100_info mvme3100_1263 = {
+    .desc = "MVME3100-1263",
+    .cpu_freq = 833333333u,
+    /* CCB/PCI  -> 5/1
+     * core/CCB -> 5/2
+     */
+    .porpllsr = 0x0005000a,
+    .ram_size = 512 * (1 << 20),
+};
+
+static const TypeInfo mvme3100_1263_type = {
+    .name = MACHINE_TYPE_NAME("mvme3100-1263"),
+    .parent = TYPE_MVME3100,
+    .class_init = ppce500_machine_class_init,
+    .class_data = &mvme3100_1263,
+};
+
+static void mvme3100_machine_init(void)
+{
+    type_register_static(&mvme3100_type);
+    type_register_static(&mvme3100_1152_type);
+    type_register_static(&mvme3100_1263_type);
+}
+
+type_init(mvme3100_machine_init)
diff --git a/hw/ppc/mvme3100_cpld.c b/hw/ppc/mvme3100_cpld.c
new file mode 100644
index 0000000000..41024566ce
--- /dev/null
+++ b/hw/ppc/mvme3100_cpld.c
@@ -0,0 +1,192 @@
+/*
+ * MVME3100 board CPLD (local logic)
+ *
+ * Copyright (c) 2015 Michael Davidsaver
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.  See
+ * the LICENSE file in the top-level directory.
+ *
+ * This model was developed according to the
+ * MVME3100 Single Board Computer Programmer's Reference
+ * P/N: 6806800G37B
+ * July 2014
+ *
+ * And validated against the RTEMS 4.9.6 mvme3100 BSP
+ */
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "qemu/module.h"
+#include "exec/address-spaces.h"
+#include "qemu-common.h"
+#include "sysemu/sysemu.h"
+#include "hw/sysbus.h"
+
+/* #define DEBUG_3100CPLD */
+
+#define TYPE_CPLD "mvme3100-cpld"
+
+#define CPLD(obj) OBJECT_CHECK(MVMECPLD, (obj), TYPE_CPLD)
+
+#ifdef DEBUG_3100CPLD
+#define DPRINTK(FMT, ...) printf(TYPE_CPLD " : " FMT, ## __VA_ARGS__)
+#else
+#define DPRINTK(FMT, ...) do {} while (0)
+#endif
+
+#define LOG(MSK, FMT, ...) qemu_log_mask(MSK, TYPE_CPLD " : " FMT, \
+    ## __VA_ARGS__)
+
+#define CPLD_SIZE 0x20
+
+typedef struct {
+    SysBusDevice parent_obj;
+
+    uint8_t mem[0x10];
+    uint32_t test;
+
+    MemoryRegion mmio;
+} MVMECPLD;
+
+static
+uint64_t cpld_read(void *opaque, hwaddr addr, unsigned size)
+{
+    MVMECPLD *self = opaque;
+    uint32_t offset = addr;
+    uint32_t val, A;
+
+    switch (offset) {
+    case 1 ... 0xf:
+        val = 0;
+        A = offset;
+        while (size--) {
+            val <<= 8;
+            val |= self->mem[A++];
+        }
+        break;
+    case 0x10:
+        val = self->test;
+        break;
+    case 0x14:
+        val = ~self->test;
+        break;
+    default:
+        LOG(LOG_UNIMP, "read from unimplimented register %08x\n",
+            (unsigned)offset);
+        val = 0;
+    }
+
+    DPRINTK("read %08x -> %08x\n", (unsigned)offset, (unsigned)val);
+
+    return val;
+}
+
+static
+void cpld_write(void *opaque, hwaddr addr, uint64_t val, unsigned size)
+{
+    MVMECPLD *self = opaque;
+    uint32_t offset = addr;
+
+    DPRINTK("write %08x <- %08x\n", (unsigned)offset, (unsigned)val);
+
+    switch (offset) {
+    case 0:
+        break;
+    case 1:
+        /* TODO: TSTAT_MASK and EEPROM_WPEEPROM */
+        if ((val & 0xe0) == 0xa0) {
+            qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
+        }
+        self->mem[offset >> 2] = val & 0x3;
+        break;
+    case 2:
+        self->mem[offset >> 2] = val & 0xf;
+        break;
+    case 3:
+        self->mem[offset >> 2] = val & 0x18;
+        break;
+    case 4 ... 9:
+        break;
+    case 10 ... 13:
+        /* TODO: allow date to be changed? */
+        break;
+    case 0x10:
+        self->test = val;
+        break;
+    case 0x11:
+        self->test = ~val;
+        break;
+    default:
+        LOG(LOG_UNIMP, "write to unimplimented register %08x\n",
+            (unsigned)offset);
+        break;
+    }
+}
+
+static const MemoryRegionOps cpld_ops = {
+    .read = cpld_read,
+    .write = cpld_write,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+};
+static
+void mvme3100_cpld_realize(DeviceState *dev, Error **errp)
+{
+    MVMECPLD *self = CPLD(dev);
+
+    memory_region_init_io(&self->mmio, OBJECT(self), &cpld_ops, self,
+                          TYPE_CPLD, CPLD_SIZE);
+
+    sysbus_init_mmio(&self->parent_obj, &self->mmio);
+}
+
+static Property mvme3100_cpld_props[] = {
+    DEFINE_PROP_END_OF_LIST()
+};
+
+static
+void mvme3100_cpld_reset(DeviceState *dev)
+{
+    MVMECPLD *self = CPLD(dev);
+
+    self->mem[0] = 0; /* Type VME SBC, SAFE_START==0 */
+    self->mem[1] = 3;
+    self->mem[2] = 1;
+    self->mem[3] = 9;
+    self->mem[4] = 9;
+    self->mem[5] = 0xa9;
+    self->mem[6] = 1;
+    self->mem[7] = 0xe0; /* TODO, TSEC phy irq status */
+    self->mem[8] = 1; /* TODO: PMC presence ...? */
+    self->mem[9] = 1; /* TODO: real rev. # */
+    self->mem[10] = 15; /* TODO: real date code */
+    self->mem[11] = 11;
+    self->mem[12] = 14;
+    self->mem[13] = 1;
+    self->test = 0;
+}
+
+static
+void mvme3100_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->realize = &mvme3100_cpld_realize;
+    dc->reset = &mvme3100_cpld_reset;
+    dc->desc = "mvme3100 CPLD logic";
+    dc->props = mvme3100_cpld_props;
+}
+
+static const TypeInfo mvme3100_cpld_info = {
+    .name = TYPE_CPLD,
+    .parent = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(MVMECPLD),
+    .class_size = sizeof(SysBusDeviceClass),
+    .class_init = mvme3100_class_init,
+};
+
+static
+void mvme3100_cpld_register(void)
+{
+    type_register_static(&mvme3100_cpld_info);
+}
+
+type_init(mvme3100_cpld_register)
-- 
2.11.0