All of lore.kernel.org
 help / color / mirror / Atom feed
From: James Cameron <quozl@laptop.org>
To: "Rákosi Gergely" <rakosi.gergely@gmail.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>, linux-wireless@vger.kernel.org
Subject: Re: rtl8723be on Fedora27
Date: Wed, 22 Nov 2017 08:30:46 +1100	[thread overview]
Message-ID: <20171121213046.GD5400@us.netrek.org> (raw)
In-Reply-To: <e639e8df-7cea-87c5-add9-cea1c5e57a8a@gmail.com>

On Tue, Nov 21, 2017 at 09:52:12PM +0100, Rákosi Gergely wrote:
> 2017-11-21 21:37 keltezéssel, James Cameron írta:
> > On Tue, Nov 21, 2017 at 03:08:16PM +0100, Rákosi Gergely wrote:
> >> 2017-11-18 16:52 keltezéssel, Larry Finger írta:
> >>> On 11/17/2017 06:22 PM, Rákosi Gergely wrote:
> >>>> Hello Larry,
> >>>>
> >>>> First of all, thanks your help.
> >>>> Lets see...here is the kernel version: 4.13.12-300
> >>>> The machine is an Asus ROG 553VE
> >>>>
> >>>> The firmware which loading in the dmesg is : rtlwifi/rtl8723befw_36.bin
> >>>> The output of md5sum is : 1850c1308fbcd95e9f6a7f58ede1e35f
> >>> [...]
> >>> sudo iw dev wlan0 scan | egrep "SSID|signal"
> >>>
> >>> Post that output. In addition, copy the dmesg output to some pastebin
> >>> and post the link as well.
> >>>
> >>> Larry
> >>>
> >> Hello Larry,
> >>
> >> I hope this email post format is good, and fit to the rules.
> >> Here is the output:
> >>
> >> root@skynet-x2 ~]# iw dev wlp2s0 scan | egrep "SSID|signal"
> >>         signal: -46.00 dBm
> >>         SSID: SKYNET-X2
> >> [...]
> >> [root@skynet-x2 ~]#
> > Scan results seem normal.  Was this scan before disconnect?
>
> Yes, this command output taken while the connection was OK

Thanks.

> >> And the dmesg output:
> >>
> >> https://pastebin.com/iqQSu2hD
> > Is now v4.13.13.
>
> Yes, thats the upgraded kernel
>
> > This is interesting, an H2C command was dropped, but no idea which.
> >
> > [    9.848052] rtl8723be: error H2C cmd because of Fw download fail!!!
> >
> > Disconnection happened at boot+440 seconds, associate+429 seconds;
> >
> > [  439.871033] rtlwifi: AP off, try to reconnect now
> > [  439.871093] wlp2s0: Connection to AP 4c:5e:0c:c7:fa:e3 lost
> >
> > I cannot tell what causes disconnect.  I wonder if the same
> > timing of the problem happens always, or if the timing varies.
>
> The timing always changing, never is the same. And I dont realize
> the cause at now...

Thanks.  I had similar problem with different wireless device.

> > Init MAC failed was another 30 seconds later;
> >
> > [  468.600670] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
> > [  469.618926] rtl8723be: Init MAC failed
> >
> > Looking at _rtl8723be_init_mac, there are two false returns;
> > hardware power on fail, and llt write fail.
> >
> > Sorry, I don't have rtl8723be hardware.
> >
> > Rákosi, did any older kernel keep connection?
> 
> The oldest kernel is 4.13.9-300.fc27.x86_64 in Fedora 27
> installation, but did the same.  If you can give advise how, and
> what I do, then I'll try it.

You might try running "Live CD" of Fedora 26 or Fedora 25, without
installing, to test if unexpected disconnection happens in two older
kernels.  Not for permanent solution, just for easy testing.

I don't have specific advice for Fedora 27, you might ask Fedora
community about that, or use RHBZ.  A quick search finds this old 2013
page;

https://fedoraproject.org/wiki/User:Ignatenkobrain/Kernel/Bisection

-- 
James Cameron
http://quozl.netrek.org/

  reply	other threads:[~2017-11-21 21:30 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-17  8:16 rtl8723be on Fedora27 Rákosi Gergely
2017-11-17 15:51 ` Larry Finger
2017-11-18  0:22   ` Rákosi Gergely
2017-11-18 15:52     ` Larry Finger
2017-11-21 14:08       ` Rákosi Gergely
2017-11-21 20:37         ` James Cameron
2017-11-21 20:52           ` Rákosi Gergely
2017-11-21 21:30             ` James Cameron [this message]
2017-11-23 14:36               ` Rákosi Gergely
2017-11-23 18:24                 ` Larry Finger
2017-11-23 18:29                   ` Rákosi Gergely
2017-11-18  5:06 ` rosenp
2017-11-18  7:50   ` Rákosi Gergely
2017-11-18 15:40     ` Larry Finger
2017-11-18 15:19   ` Larry Finger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171121213046.GD5400@us.netrek.org \
    --to=quozl@laptop.org \
    --cc=Larry.Finger@lwfinger.net \
    --cc=linux-wireless@vger.kernel.org \
    --cc=rakosi.gergely@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.