[PATCH] drm/i915: Avoid PPS HW/SW state mismatch due to rounding

[Imre Deak <imre.deak@intel.com>]

We store a SW state of the t11_t12 timing in 100usec units but have to
program it in 100msec as required by HW. The rounding used during
programming means there will be a mismatch between the SW and HW states
of this value triggering a "PPS state mismatch" error. Avoid this by
storing the already rounded-up value in the SW state.

Note that we still calculate panel_power_cycle_delay with the finer
100usec granularity to avoid any needless waits using that version of
the delay.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103903
Cc: joks <joks@linux.pl>
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
 drivers/gpu/drm/i915/intel_dp.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 957735c0b4c6..27d2529a3416 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -5355,6 +5355,12 @@ intel_dp_init_panel_power_sequencer(struct intel_dp *intel_dp)
 	 */
 	final->t8 = 1;
 	final->t9 = 1;
+
+	/*
+	 * HW has only a 100msec granularity for t11_t12 so round it up
+	 * accordingly.
+	 */
+	final->t11_t12 = roundup(final->t11_t12, 100 * 10);
 }
 
 static void
-- 
2.13.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx