From: <linux-kernel-dev@beckhoff.com>
To: Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <kernel@pengutronix.de>,
Alessandro Zummo <a.zummo@towertech.it>,
Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: "Patrick Bruenn" <p.bruenn@beckhoff.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Mark Rutland" <mark.rutland@arm.com>,
"open list:REAL TIME CLOCK (RTC) SUBSYSTEM"
<linux-rtc@vger.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
"open list" <linux-kernel@vger.kernel.org>,
"Fabio Estevam" <fabio.estevam@nxp.com>,
"Juergen Borleis" <jbe@pengutronix.de>,
"Noel Vellemans" <Noel.Vellemans@visionbms.com>,
"Russell King" <linux@armlinux.org.uk>,
"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<linux-arm-kernel@lists.infradead.org>,
"Philippe Ombredanne" <pombredanne@nexb.com>,
"Lothar Waßmann" <LW@KARO-electronics.de>
Subject: [PATCH v2 5/5] rtc: add mxc driver for i.MX53 SRTC
Date: Tue, 5 Dec 2017 15:06:46 +0100 [thread overview]
Message-ID: <20171205140646.30367-6-linux-kernel-dev@beckhoff.com> (raw)
In-Reply-To: <20171205140646.30367-1-linux-kernel-dev@beckhoff.com>
From: Patrick Bruenn <p.bruenn@beckhoff.com>
Neither rtc-imxdi, rtc-mxc nor rtc-snvs are compatible with i.MX53.
This is driver enables support for the low power domain SRTC features:
- 32-bit MSB of non-rollover time counter
- 32-bit alarm register
Based on:
http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/tree/drivers/rtc/rtc-mxc_v2.c?h=imx_2.6.35_11.09.01
Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
---
v2:
- have seperate patches for dt-binding, CONFIG option, imx53.dtsi and driver
- add SPDX-License-Identifier and cleanup copyright notice
- replace __raw_readl/writel() with readl/writel()
- fix PM_SLEEP callbacks
- add CONFIG_RTC_DRV_MXC_V2 to build rtc-mxc_v2.c
- remove misleading or obvious comments and fix style of the remaining
- avoid endless loop while waiting for hw
- implement consistent locking; make spinlock a member of dev struct
- enable clk only for register accesses
- remove all udelay() calls since they are obsolete or redundant
(we are already waiting for register flags to change)
- init platform_data before registering irq callback
- let set_time() fail, when 32 bit rtc counter exceeded
- make names more consistent
- cleanup and reorder includes
- cleanup and remove unused defines
To: Alessandro Zummo <a.zummo@towertech.it>
To: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com> (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)
Cc: linux-rtc@vger.kernel.org (open list:REAL TIME CLOCK (RTC) SUBSYSTEM)
Cc: devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)
Cc: linux-kernel@vger.kernel.org (open list)
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Juergen Borleis <jbe@pengutronix.de>
Cc: Noel Vellemans <Noel.Vellemans@visionbms.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de> (maintainer:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE)
Cc: Russell King <linux@armlinux.org.uk> (maintainer:ARM PORT)
Cc: linux-arm-kernel@lists.infradead.org (moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE)
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Lothar Waßmann <LW@KARO-electronics.de>
---
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-mxc_v2.c | 433 +++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 434 insertions(+)
create mode 100644 drivers/rtc/rtc-mxc_v2.c
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index f2f50c11dc38..dcf60e61ae5c 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -106,6 +106,7 @@ obj-$(CONFIG_RTC_DRV_MT6397) += rtc-mt6397.o
obj-$(CONFIG_RTC_DRV_MT7622) += rtc-mt7622.o
obj-$(CONFIG_RTC_DRV_MV) += rtc-mv.o
obj-$(CONFIG_RTC_DRV_MXC) += rtc-mxc.o
+obj-$(CONFIG_RTC_DRV_MXC_V2) += rtc-mxc_v2.o
obj-$(CONFIG_RTC_DRV_NUC900) += rtc-nuc900.o
obj-$(CONFIG_RTC_DRV_OMAP) += rtc-omap.o
obj-$(CONFIG_RTC_DRV_OPAL) += rtc-opal.o
diff --git a/drivers/rtc/rtc-mxc_v2.c b/drivers/rtc/rtc-mxc_v2.c
new file mode 100644
index 000000000000..c5a6d2c293bb
--- /dev/null
+++ b/drivers/rtc/rtc-mxc_v2.c
@@ -0,0 +1,433 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Real Time Clock (RTC) Driver for i.MX53
+ * Copyright (c) 2004-2011 Freescale Semiconductor, Inc.
+ * Copyright (c) 2017 Beckhoff Automation GmbH & Co. KG
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+
+#define SRTC_LPPDR_INIT 0x41736166 /* init for glitch detect */
+
+#define SRTC_LPCR_EN_LP BIT(3) /* lp enable */
+#define SRTC_LPCR_WAE BIT(4) /* lp wakeup alarm enable */
+#define SRTC_LPCR_ALP BIT(7) /* lp alarm flag */
+#define SRTC_LPCR_NSA BIT(11) /* lp non secure access */
+#define SRTC_LPCR_NVE BIT(14) /* lp non valid state exit bit */
+#define SRTC_LPCR_IE BIT(15) /* lp init state exit bit */
+
+#define SRTC_LPSR_ALP BIT(3) /* lp alarm flag */
+#define SRTC_LPSR_NVES BIT(14) /* lp non-valid state exit status */
+#define SRTC_LPSR_IES BIT(15) /* lp init state exit status */
+
+#define SRTC_LPSCMR 0x00 /* LP Secure Counter MSB Reg */
+#define SRTC_LPSCLR 0x04 /* LP Secure Counter LSB Reg */
+#define SRTC_LPSAR 0x08 /* LP Secure Alarm Reg */
+#define SRTC_LPCR 0x10 /* LP Control Reg */
+#define SRTC_LPSR 0x14 /* LP Status Reg */
+#define SRTC_LPPDR 0x18 /* LP Power Supply Glitch Detector Reg */
+
+/* max. number of retries to read registers, 120 was max during test */
+#define REG_READ_TIMEOUT 2000
+
+struct mxc_rtc_data {
+ struct rtc_device *rtc;
+ void __iomem *ioaddr;
+ struct clk *clk;
+ spinlock_t lock; /* protects register access */
+ int irq;
+};
+
+/*
+ * This function does write synchronization for writes to the lp srtc block.
+ * To take care of the asynchronous CKIL clock, all writes from the IP domain
+ * will be synchronized to the CKIL domain.
+ * The caller should hold the pdata->lock
+ */
+static inline void mxc_rtc_sync_lp_locked(void __iomem *ioaddr)
+{
+ unsigned int i;
+
+ /* Wait for 3 CKIL cycles */
+ for (i = 0; i < 3; i++) {
+ const u32 count = readl(ioaddr + SRTC_LPSCLR);
+ unsigned int timeout = REG_READ_TIMEOUT;
+
+ while ((readl(ioaddr + SRTC_LPSCLR)) == count) {
+ if (!--timeout) {
+ pr_err("SRTC_LPSCLR stuck! Check your hw.\n");
+ return;
+ }
+ }
+ }
+}
+
+/*
+ * This function updates the RTC alarm registers and then clears all the
+ * interrupt status bits.
+ * The caller should hold the pdata->lock
+ *
+ * @param alrm the new alarm value to be updated in the RTC
+ *
+ * @return 0 if successful; non-zero otherwise.
+ */
+static int mxc_rtc_write_alarm_locked(struct mxc_rtc_data *const pdata,
+ struct rtc_time *alarm_tm)
+{
+ void __iomem *const ioaddr = pdata->ioaddr;
+ unsigned long time;
+
+ rtc_tm_to_time(alarm_tm, &time);
+
+ if (time > U32_MAX) {
+ pr_err("Hopefully I am out of service by then :-(\n");
+ return -EINVAL;
+ }
+
+ writel((u32)time, ioaddr + SRTC_LPSAR);
+
+ /* clear alarm interrupt status bit */
+ writel(SRTC_LPSR_ALP, ioaddr + SRTC_LPSR);
+
+ mxc_rtc_sync_lp_locked(ioaddr);
+ return 0;
+}
+
+/* This function is the RTC interrupt service routine. */
+static irqreturn_t mxc_rtc_interrupt(int irq, void *dev_id)
+{
+ struct platform_device *pdev = dev_id;
+ struct mxc_rtc_data *pdata = platform_get_drvdata(pdev);
+ void __iomem *ioaddr = pdata->ioaddr;
+ unsigned long flags;
+ u32 events = 0;
+ u32 lp_status;
+ u32 lp_cr;
+
+ spin_lock_irqsave(&pdata->lock, flags);
+ if (clk_prepare_enable(pdata->clk)) {
+ spin_unlock_irqrestore(&pdata->lock, flags);
+ return IRQ_NONE;
+ }
+
+ lp_status = readl(ioaddr + SRTC_LPSR);
+ lp_cr = readl(ioaddr + SRTC_LPCR);
+
+ /* update irq data & counter */
+ if (lp_status & SRTC_LPSR_ALP) {
+ if (lp_cr & SRTC_LPCR_ALP)
+ events = (RTC_AF | RTC_IRQF);
+
+ /* disable further lp alarm interrupts */
+ lp_cr &= ~(SRTC_LPCR_ALP | SRTC_LPCR_WAE);
+ }
+
+ /* Update interrupt enables */
+ writel(lp_cr, ioaddr + SRTC_LPCR);
+
+ /* clear interrupt status */
+ writel(lp_status, ioaddr + SRTC_LPSR);
+
+ mxc_rtc_sync_lp_locked(ioaddr);
+ rtc_update_irq(pdata->rtc, 1, events);
+ clk_disable_unprepare(pdata->clk);
+ spin_unlock_irqrestore(&pdata->lock, flags);
+ return IRQ_HANDLED;
+}
+
+/*
+ * Enable clk and aquire spinlock
+ * @return 0 if successful; non-zero otherwise.
+ */
+static int mxc_rtc_lock(struct mxc_rtc_data *const pdata)
+{
+ int ret;
+
+ spin_lock_irq(&pdata->lock);
+ ret = clk_prepare_enable(pdata->clk);
+ if (ret) {
+ spin_unlock_irq(&pdata->lock);
+ return ret;
+ }
+ return 0;
+}
+
+static int mxc_rtc_unlock(struct mxc_rtc_data *const pdata)
+{
+ clk_disable_unprepare(pdata->clk);
+ spin_unlock_irq(&pdata->lock);
+ return 0;
+}
+
+/*
+ * This function reads the current RTC time into tm in Gregorian date.
+ *
+ * @param tm contains the RTC time value upon return
+ *
+ * @return 0 if successful; non-zero otherwise.
+ */
+static int mxc_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
+ time_t now;
+ int ret = mxc_rtc_lock(pdata);
+
+ if (ret)
+ return ret;
+
+ now = readl(pdata->ioaddr + SRTC_LPSCMR);
+ rtc_time_to_tm(now, tm);
+ ret = rtc_valid_tm(tm);
+ mxc_rtc_unlock(pdata);
+ return ret;
+}
+
+/*
+ * This function sets the internal RTC time based on tm in Gregorian date.
+ *
+ * @param tm the time value to be set in the RTC
+ *
+ * @return 0 if successful; non-zero otherwise.
+ */
+static int mxc_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
+ time64_t time = rtc_tm_to_time64(tm);
+ int ret;
+
+ if (time > U32_MAX) {
+ dev_err(dev, "RTC exceeded by %llus\n", time - U32_MAX);
+ return -EINVAL;
+ }
+
+ ret = mxc_rtc_lock(pdata);
+ if (ret)
+ return ret;
+
+ writel(time, pdata->ioaddr + SRTC_LPSCMR);
+ mxc_rtc_sync_lp_locked(pdata->ioaddr);
+ return mxc_rtc_unlock(pdata);
+}
+
+/*
+ * This function reads the current alarm value into the passed in \b alrm
+ * argument. It updates the \b alrm's pending field value based on the whether
+ * an alarm interrupt occurs or not.
+ *
+ * @param alrm contains the RTC alarm value upon return
+ *
+ * @return 0 if successful; non-zero otherwise.
+ */
+static int mxc_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
+ void __iomem *ioaddr = pdata->ioaddr;
+ int ret;
+
+ ret = mxc_rtc_lock(pdata);
+ if (ret)
+ return ret;
+
+ rtc_time_to_tm(readl(ioaddr + SRTC_LPSAR), &alrm->time);
+ alrm->pending = !!(readl(ioaddr + SRTC_LPSR) & SRTC_LPSR_ALP);
+ return mxc_rtc_unlock(pdata);
+}
+
+/*
+ * Enable/Disable alarm interrupt
+ * The caller should hold the pdata->lock
+ */
+static void mxc_rtc_alarm_irq_enable_locked(struct mxc_rtc_data *pdata,
+ unsigned int enable)
+{
+ u32 lp_cr = readl(pdata->ioaddr + SRTC_LPCR);
+
+ if (enable)
+ lp_cr |= (SRTC_LPCR_ALP | SRTC_LPCR_WAE);
+ else
+ lp_cr &= ~(SRTC_LPCR_ALP | SRTC_LPCR_WAE);
+
+ writel(lp_cr, pdata->ioaddr + SRTC_LPCR);
+}
+
+static int mxc_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
+{
+ struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
+ int ret = mxc_rtc_lock(pdata);
+
+ if (ret)
+ return ret;
+
+ mxc_rtc_alarm_irq_enable_locked(pdata, enable);
+ return mxc_rtc_unlock(pdata);
+}
+
+/*
+ * This function sets the RTC alarm based on passed in alrm.
+ *
+ * @param alrm the alarm value to be set in the RTC
+ *
+ * @return 0 if successful; non-zero otherwise.
+ */
+static int mxc_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
+ int ret = mxc_rtc_lock(pdata);
+
+ if (ret)
+ return ret;
+
+ ret = mxc_rtc_write_alarm_locked(pdata, &alrm->time);
+ if (!ret) {
+ mxc_rtc_alarm_irq_enable_locked(pdata, alrm->enabled);
+ mxc_rtc_sync_lp_locked(pdata->ioaddr);
+ }
+ mxc_rtc_unlock(pdata);
+ return ret;
+}
+
+static const struct rtc_class_ops mxc_rtc_ops = {
+ .read_time = mxc_rtc_read_time,
+ .set_time = mxc_rtc_set_time,
+ .read_alarm = mxc_rtc_read_alarm,
+ .set_alarm = mxc_rtc_set_alarm,
+ .alarm_irq_enable = mxc_rtc_alarm_irq_enable,
+};
+
+static int mxc_rtc_wait_for_flag(void *__iomem ioaddr, int flag)
+{
+ unsigned int timeout = REG_READ_TIMEOUT;
+
+ while (!(readl(ioaddr) & flag)) {
+ if (!--timeout) {
+ pr_err("Wait timeout for 0x%x@%p!\n", flag, ioaddr);
+ return -EBUSY;
+ }
+ }
+ return 0;
+}
+
+static int mxc_rtc_probe(struct platform_device *pdev)
+{
+ struct mxc_rtc_data *pdata;
+ struct resource *res;
+ void __iomem *ioaddr;
+ int ret = 0;
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ pdata->ioaddr = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(pdata->ioaddr))
+ return PTR_ERR(pdata->ioaddr);
+
+ ioaddr = pdata->ioaddr;
+
+ pdata->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(pdata->clk)) {
+ dev_err(&pdev->dev, "unable to get rtc clock!\n");
+ return PTR_ERR(pdata->clk);
+ }
+
+ spin_lock_init(&pdata->lock);
+ pdata->irq = platform_get_irq(pdev, 0);
+ if (pdata->irq < 0)
+ return pdata->irq;
+
+ device_init_wakeup(&pdev->dev, 1);
+
+ ret = clk_prepare_enable(pdata->clk);
+ if (ret)
+ return ret;
+ /* initialize glitch detect */
+ writel(SRTC_LPPDR_INIT, ioaddr + SRTC_LPPDR);
+
+ /* clear lp interrupt status */
+ writel(0xFFFFFFFF, ioaddr + SRTC_LPSR);
+
+ /* move out of init state */
+ writel((SRTC_LPCR_IE | SRTC_LPCR_NSA), ioaddr + SRTC_LPCR);
+ mxc_rtc_wait_for_flag(ioaddr + SRTC_LPSR, SRTC_LPSR_IES);
+
+ /* move out of non-valid state */
+ writel((SRTC_LPCR_IE | SRTC_LPCR_NVE | SRTC_LPCR_NSA |
+ SRTC_LPCR_EN_LP), ioaddr + SRTC_LPCR);
+ mxc_rtc_wait_for_flag(ioaddr + SRTC_LPSR, SRTC_LPSR_NVES);
+
+ clk_disable_unprepare(pdata->clk);
+ platform_set_drvdata(pdev, pdata);
+ ret =
+ devm_request_irq(&pdev->dev, pdata->irq, mxc_rtc_interrupt, 0,
+ pdev->name, pdev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "interrupt not available.\n");
+ return ret;
+ }
+
+ pdata->rtc =
+ devm_rtc_device_register(&pdev->dev, pdev->name, &mxc_rtc_ops,
+ THIS_MODULE);
+ if (IS_ERR(pdata->rtc))
+ return PTR_ERR(pdata->rtc);
+
+ return 0;
+}
+
+static int __exit mxc_rtc_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int mxc_rtc_suspend(struct device *dev)
+{
+ struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev))
+ enable_irq_wake(pdata->irq);
+
+ return 0;
+}
+
+static int mxc_rtc_resume(struct device *dev)
+{
+ struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev))
+ disable_irq_wake(pdata->irq);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(mxc_rtc_pm_ops, mxc_rtc_suspend, mxc_rtc_resume);
+
+static const struct of_device_id mxc_ids[] = {
+ { .compatible = "fsl,imx53-rtc", },
+ {}
+};
+
+static struct platform_driver mxc_rtc_driver = {
+ .driver = {
+ .name = "mxc_rtc_v2",
+ .of_match_table = mxc_ids,
+ .pm = &mxc_rtc_pm_ops,
+ },
+ .probe = mxc_rtc_probe,
+ .remove = mxc_rtc_remove,
+};
+
+module_platform_driver(mxc_rtc_driver);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("Real Time Clock (RTC) Driver for i.MX53");
+MODULE_LICENSE("GPL");
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: linux-kernel-dev@beckhoff.com (linux-kernel-dev at beckhoff.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 5/5] rtc: add mxc driver for i.MX53 SRTC
Date: Tue, 5 Dec 2017 15:06:46 +0100 [thread overview]
Message-ID: <20171205140646.30367-6-linux-kernel-dev@beckhoff.com> (raw)
In-Reply-To: <20171205140646.30367-1-linux-kernel-dev@beckhoff.com>
From: Patrick Bruenn <p.bruenn@beckhoff.com>
Neither rtc-imxdi, rtc-mxc nor rtc-snvs are compatible with i.MX53.
This is driver enables support for the low power domain SRTC features:
- 32-bit MSB of non-rollover time counter
- 32-bit alarm register
Based on:
http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/tree/drivers/rtc/rtc-mxc_v2.c?h=imx_2.6.35_11.09.01
Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
---
v2:
- have seperate patches for dt-binding, CONFIG option, imx53.dtsi and driver
- add SPDX-License-Identifier and cleanup copyright notice
- replace __raw_readl/writel() with readl/writel()
- fix PM_SLEEP callbacks
- add CONFIG_RTC_DRV_MXC_V2 to build rtc-mxc_v2.c
- remove misleading or obvious comments and fix style of the remaining
- avoid endless loop while waiting for hw
- implement consistent locking; make spinlock a member of dev struct
- enable clk only for register accesses
- remove all udelay() calls since they are obsolete or redundant
(we are already waiting for register flags to change)
- init platform_data before registering irq callback
- let set_time() fail, when 32 bit rtc counter exceeded
- make names more consistent
- cleanup and reorder includes
- cleanup and remove unused defines
To: Alessandro Zummo <a.zummo@towertech.it>
To: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com> (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)
Cc: linux-rtc at vger.kernel.org (open list:REAL TIME CLOCK (RTC) SUBSYSTEM)
Cc: devicetree at vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)
Cc: linux-kernel at vger.kernel.org (open list)
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Juergen Borleis <jbe@pengutronix.de>
Cc: Noel Vellemans <Noel.Vellemans@visionbms.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de> (maintainer:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE)
Cc: Russell King <linux@armlinux.org.uk> (maintainer:ARM PORT)
Cc: linux-arm-kernel at lists.infradead.org (moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE)
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Lothar Wa?mann <LW@KARO-electronics.de>
---
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-mxc_v2.c | 433 +++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 434 insertions(+)
create mode 100644 drivers/rtc/rtc-mxc_v2.c
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index f2f50c11dc38..dcf60e61ae5c 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -106,6 +106,7 @@ obj-$(CONFIG_RTC_DRV_MT6397) += rtc-mt6397.o
obj-$(CONFIG_RTC_DRV_MT7622) += rtc-mt7622.o
obj-$(CONFIG_RTC_DRV_MV) += rtc-mv.o
obj-$(CONFIG_RTC_DRV_MXC) += rtc-mxc.o
+obj-$(CONFIG_RTC_DRV_MXC_V2) += rtc-mxc_v2.o
obj-$(CONFIG_RTC_DRV_NUC900) += rtc-nuc900.o
obj-$(CONFIG_RTC_DRV_OMAP) += rtc-omap.o
obj-$(CONFIG_RTC_DRV_OPAL) += rtc-opal.o
diff --git a/drivers/rtc/rtc-mxc_v2.c b/drivers/rtc/rtc-mxc_v2.c
new file mode 100644
index 000000000000..c5a6d2c293bb
--- /dev/null
+++ b/drivers/rtc/rtc-mxc_v2.c
@@ -0,0 +1,433 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Real Time Clock (RTC) Driver for i.MX53
+ * Copyright (c) 2004-2011 Freescale Semiconductor, Inc.
+ * Copyright (c) 2017 Beckhoff Automation GmbH & Co. KG
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+
+#define SRTC_LPPDR_INIT 0x41736166 /* init for glitch detect */
+
+#define SRTC_LPCR_EN_LP BIT(3) /* lp enable */
+#define SRTC_LPCR_WAE BIT(4) /* lp wakeup alarm enable */
+#define SRTC_LPCR_ALP BIT(7) /* lp alarm flag */
+#define SRTC_LPCR_NSA BIT(11) /* lp non secure access */
+#define SRTC_LPCR_NVE BIT(14) /* lp non valid state exit bit */
+#define SRTC_LPCR_IE BIT(15) /* lp init state exit bit */
+
+#define SRTC_LPSR_ALP BIT(3) /* lp alarm flag */
+#define SRTC_LPSR_NVES BIT(14) /* lp non-valid state exit status */
+#define SRTC_LPSR_IES BIT(15) /* lp init state exit status */
+
+#define SRTC_LPSCMR 0x00 /* LP Secure Counter MSB Reg */
+#define SRTC_LPSCLR 0x04 /* LP Secure Counter LSB Reg */
+#define SRTC_LPSAR 0x08 /* LP Secure Alarm Reg */
+#define SRTC_LPCR 0x10 /* LP Control Reg */
+#define SRTC_LPSR 0x14 /* LP Status Reg */
+#define SRTC_LPPDR 0x18 /* LP Power Supply Glitch Detector Reg */
+
+/* max. number of retries to read registers, 120 was max during test */
+#define REG_READ_TIMEOUT 2000
+
+struct mxc_rtc_data {
+ struct rtc_device *rtc;
+ void __iomem *ioaddr;
+ struct clk *clk;
+ spinlock_t lock; /* protects register access */
+ int irq;
+};
+
+/*
+ * This function does write synchronization for writes to the lp srtc block.
+ * To take care of the asynchronous CKIL clock, all writes from the IP domain
+ * will be synchronized to the CKIL domain.
+ * The caller should hold the pdata->lock
+ */
+static inline void mxc_rtc_sync_lp_locked(void __iomem *ioaddr)
+{
+ unsigned int i;
+
+ /* Wait for 3 CKIL cycles */
+ for (i = 0; i < 3; i++) {
+ const u32 count = readl(ioaddr + SRTC_LPSCLR);
+ unsigned int timeout = REG_READ_TIMEOUT;
+
+ while ((readl(ioaddr + SRTC_LPSCLR)) == count) {
+ if (!--timeout) {
+ pr_err("SRTC_LPSCLR stuck! Check your hw.\n");
+ return;
+ }
+ }
+ }
+}
+
+/*
+ * This function updates the RTC alarm registers and then clears all the
+ * interrupt status bits.
+ * The caller should hold the pdata->lock
+ *
+ * @param alrm the new alarm value to be updated in the RTC
+ *
+ * @return 0 if successful; non-zero otherwise.
+ */
+static int mxc_rtc_write_alarm_locked(struct mxc_rtc_data *const pdata,
+ struct rtc_time *alarm_tm)
+{
+ void __iomem *const ioaddr = pdata->ioaddr;
+ unsigned long time;
+
+ rtc_tm_to_time(alarm_tm, &time);
+
+ if (time > U32_MAX) {
+ pr_err("Hopefully I am out of service by then :-(\n");
+ return -EINVAL;
+ }
+
+ writel((u32)time, ioaddr + SRTC_LPSAR);
+
+ /* clear alarm interrupt status bit */
+ writel(SRTC_LPSR_ALP, ioaddr + SRTC_LPSR);
+
+ mxc_rtc_sync_lp_locked(ioaddr);
+ return 0;
+}
+
+/* This function is the RTC interrupt service routine. */
+static irqreturn_t mxc_rtc_interrupt(int irq, void *dev_id)
+{
+ struct platform_device *pdev = dev_id;
+ struct mxc_rtc_data *pdata = platform_get_drvdata(pdev);
+ void __iomem *ioaddr = pdata->ioaddr;
+ unsigned long flags;
+ u32 events = 0;
+ u32 lp_status;
+ u32 lp_cr;
+
+ spin_lock_irqsave(&pdata->lock, flags);
+ if (clk_prepare_enable(pdata->clk)) {
+ spin_unlock_irqrestore(&pdata->lock, flags);
+ return IRQ_NONE;
+ }
+
+ lp_status = readl(ioaddr + SRTC_LPSR);
+ lp_cr = readl(ioaddr + SRTC_LPCR);
+
+ /* update irq data & counter */
+ if (lp_status & SRTC_LPSR_ALP) {
+ if (lp_cr & SRTC_LPCR_ALP)
+ events = (RTC_AF | RTC_IRQF);
+
+ /* disable further lp alarm interrupts */
+ lp_cr &= ~(SRTC_LPCR_ALP | SRTC_LPCR_WAE);
+ }
+
+ /* Update interrupt enables */
+ writel(lp_cr, ioaddr + SRTC_LPCR);
+
+ /* clear interrupt status */
+ writel(lp_status, ioaddr + SRTC_LPSR);
+
+ mxc_rtc_sync_lp_locked(ioaddr);
+ rtc_update_irq(pdata->rtc, 1, events);
+ clk_disable_unprepare(pdata->clk);
+ spin_unlock_irqrestore(&pdata->lock, flags);
+ return IRQ_HANDLED;
+}
+
+/*
+ * Enable clk and aquire spinlock
+ * @return 0 if successful; non-zero otherwise.
+ */
+static int mxc_rtc_lock(struct mxc_rtc_data *const pdata)
+{
+ int ret;
+
+ spin_lock_irq(&pdata->lock);
+ ret = clk_prepare_enable(pdata->clk);
+ if (ret) {
+ spin_unlock_irq(&pdata->lock);
+ return ret;
+ }
+ return 0;
+}
+
+static int mxc_rtc_unlock(struct mxc_rtc_data *const pdata)
+{
+ clk_disable_unprepare(pdata->clk);
+ spin_unlock_irq(&pdata->lock);
+ return 0;
+}
+
+/*
+ * This function reads the current RTC time into tm in Gregorian date.
+ *
+ * @param tm contains the RTC time value upon return
+ *
+ * @return 0 if successful; non-zero otherwise.
+ */
+static int mxc_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
+ time_t now;
+ int ret = mxc_rtc_lock(pdata);
+
+ if (ret)
+ return ret;
+
+ now = readl(pdata->ioaddr + SRTC_LPSCMR);
+ rtc_time_to_tm(now, tm);
+ ret = rtc_valid_tm(tm);
+ mxc_rtc_unlock(pdata);
+ return ret;
+}
+
+/*
+ * This function sets the internal RTC time based on tm in Gregorian date.
+ *
+ * @param tm the time value to be set in the RTC
+ *
+ * @return 0 if successful; non-zero otherwise.
+ */
+static int mxc_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
+ time64_t time = rtc_tm_to_time64(tm);
+ int ret;
+
+ if (time > U32_MAX) {
+ dev_err(dev, "RTC exceeded by %llus\n", time - U32_MAX);
+ return -EINVAL;
+ }
+
+ ret = mxc_rtc_lock(pdata);
+ if (ret)
+ return ret;
+
+ writel(time, pdata->ioaddr + SRTC_LPSCMR);
+ mxc_rtc_sync_lp_locked(pdata->ioaddr);
+ return mxc_rtc_unlock(pdata);
+}
+
+/*
+ * This function reads the current alarm value into the passed in \b alrm
+ * argument. It updates the \b alrm's pending field value based on the whether
+ * an alarm interrupt occurs or not.
+ *
+ * @param alrm contains the RTC alarm value upon return
+ *
+ * @return 0 if successful; non-zero otherwise.
+ */
+static int mxc_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
+ void __iomem *ioaddr = pdata->ioaddr;
+ int ret;
+
+ ret = mxc_rtc_lock(pdata);
+ if (ret)
+ return ret;
+
+ rtc_time_to_tm(readl(ioaddr + SRTC_LPSAR), &alrm->time);
+ alrm->pending = !!(readl(ioaddr + SRTC_LPSR) & SRTC_LPSR_ALP);
+ return mxc_rtc_unlock(pdata);
+}
+
+/*
+ * Enable/Disable alarm interrupt
+ * The caller should hold the pdata->lock
+ */
+static void mxc_rtc_alarm_irq_enable_locked(struct mxc_rtc_data *pdata,
+ unsigned int enable)
+{
+ u32 lp_cr = readl(pdata->ioaddr + SRTC_LPCR);
+
+ if (enable)
+ lp_cr |= (SRTC_LPCR_ALP | SRTC_LPCR_WAE);
+ else
+ lp_cr &= ~(SRTC_LPCR_ALP | SRTC_LPCR_WAE);
+
+ writel(lp_cr, pdata->ioaddr + SRTC_LPCR);
+}
+
+static int mxc_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
+{
+ struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
+ int ret = mxc_rtc_lock(pdata);
+
+ if (ret)
+ return ret;
+
+ mxc_rtc_alarm_irq_enable_locked(pdata, enable);
+ return mxc_rtc_unlock(pdata);
+}
+
+/*
+ * This function sets the RTC alarm based on passed in alrm.
+ *
+ * @param alrm the alarm value to be set in the RTC
+ *
+ * @return 0 if successful; non-zero otherwise.
+ */
+static int mxc_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
+ int ret = mxc_rtc_lock(pdata);
+
+ if (ret)
+ return ret;
+
+ ret = mxc_rtc_write_alarm_locked(pdata, &alrm->time);
+ if (!ret) {
+ mxc_rtc_alarm_irq_enable_locked(pdata, alrm->enabled);
+ mxc_rtc_sync_lp_locked(pdata->ioaddr);
+ }
+ mxc_rtc_unlock(pdata);
+ return ret;
+}
+
+static const struct rtc_class_ops mxc_rtc_ops = {
+ .read_time = mxc_rtc_read_time,
+ .set_time = mxc_rtc_set_time,
+ .read_alarm = mxc_rtc_read_alarm,
+ .set_alarm = mxc_rtc_set_alarm,
+ .alarm_irq_enable = mxc_rtc_alarm_irq_enable,
+};
+
+static int mxc_rtc_wait_for_flag(void *__iomem ioaddr, int flag)
+{
+ unsigned int timeout = REG_READ_TIMEOUT;
+
+ while (!(readl(ioaddr) & flag)) {
+ if (!--timeout) {
+ pr_err("Wait timeout for 0x%x@%p!\n", flag, ioaddr);
+ return -EBUSY;
+ }
+ }
+ return 0;
+}
+
+static int mxc_rtc_probe(struct platform_device *pdev)
+{
+ struct mxc_rtc_data *pdata;
+ struct resource *res;
+ void __iomem *ioaddr;
+ int ret = 0;
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ pdata->ioaddr = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(pdata->ioaddr))
+ return PTR_ERR(pdata->ioaddr);
+
+ ioaddr = pdata->ioaddr;
+
+ pdata->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(pdata->clk)) {
+ dev_err(&pdev->dev, "unable to get rtc clock!\n");
+ return PTR_ERR(pdata->clk);
+ }
+
+ spin_lock_init(&pdata->lock);
+ pdata->irq = platform_get_irq(pdev, 0);
+ if (pdata->irq < 0)
+ return pdata->irq;
+
+ device_init_wakeup(&pdev->dev, 1);
+
+ ret = clk_prepare_enable(pdata->clk);
+ if (ret)
+ return ret;
+ /* initialize glitch detect */
+ writel(SRTC_LPPDR_INIT, ioaddr + SRTC_LPPDR);
+
+ /* clear lp interrupt status */
+ writel(0xFFFFFFFF, ioaddr + SRTC_LPSR);
+
+ /* move out of init state */
+ writel((SRTC_LPCR_IE | SRTC_LPCR_NSA), ioaddr + SRTC_LPCR);
+ mxc_rtc_wait_for_flag(ioaddr + SRTC_LPSR, SRTC_LPSR_IES);
+
+ /* move out of non-valid state */
+ writel((SRTC_LPCR_IE | SRTC_LPCR_NVE | SRTC_LPCR_NSA |
+ SRTC_LPCR_EN_LP), ioaddr + SRTC_LPCR);
+ mxc_rtc_wait_for_flag(ioaddr + SRTC_LPSR, SRTC_LPSR_NVES);
+
+ clk_disable_unprepare(pdata->clk);
+ platform_set_drvdata(pdev, pdata);
+ ret =
+ devm_request_irq(&pdev->dev, pdata->irq, mxc_rtc_interrupt, 0,
+ pdev->name, pdev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "interrupt not available.\n");
+ return ret;
+ }
+
+ pdata->rtc =
+ devm_rtc_device_register(&pdev->dev, pdev->name, &mxc_rtc_ops,
+ THIS_MODULE);
+ if (IS_ERR(pdata->rtc))
+ return PTR_ERR(pdata->rtc);
+
+ return 0;
+}
+
+static int __exit mxc_rtc_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int mxc_rtc_suspend(struct device *dev)
+{
+ struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev))
+ enable_irq_wake(pdata->irq);
+
+ return 0;
+}
+
+static int mxc_rtc_resume(struct device *dev)
+{
+ struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev))
+ disable_irq_wake(pdata->irq);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(mxc_rtc_pm_ops, mxc_rtc_suspend, mxc_rtc_resume);
+
+static const struct of_device_id mxc_ids[] = {
+ { .compatible = "fsl,imx53-rtc", },
+ {}
+};
+
+static struct platform_driver mxc_rtc_driver = {
+ .driver = {
+ .name = "mxc_rtc_v2",
+ .of_match_table = mxc_ids,
+ .pm = &mxc_rtc_pm_ops,
+ },
+ .probe = mxc_rtc_probe,
+ .remove = mxc_rtc_remove,
+};
+
+module_platform_driver(mxc_rtc_driver);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("Real Time Clock (RTC) Driver for i.MX53");
+MODULE_LICENSE("GPL");
--
2.11.0
next prev parent reply other threads:[~2017-12-05 14:07 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-05 14:06 [PATCH v2 0/5] add mxc driver for i.MX53 SRTC linux-kernel-dev
2017-12-05 14:06 ` linux-kernel-dev at beckhoff.com
2017-12-05 14:06 ` [PATCH v2 1/5] dt-bindings: rtc: add bindings " linux-kernel-dev
2017-12-05 14:06 ` linux-kernel-dev at beckhoff.com
2017-12-06 21:54 ` Rob Herring
2017-12-06 21:54 ` Rob Herring
2017-12-06 21:54 ` Rob Herring
2017-12-11 7:08 ` Patrick Brünn
2017-12-11 7:08 ` Patrick Brünn
2017-12-11 7:08 ` Patrick Brünn
2017-12-11 23:08 ` Fabio Estevam
2017-12-11 23:08 ` Fabio Estevam
2017-12-11 23:08 ` Fabio Estevam
2017-12-11 23:08 ` Fabio Estevam
2017-12-12 5:05 ` Patrick Brünn
2017-12-12 5:05 ` Patrick Brünn
2017-12-12 5:05 ` Patrick Brünn
2017-12-12 5:05 ` Patrick Brünn
2017-12-15 21:58 ` Rob Herring
2017-12-15 21:58 ` Rob Herring
2017-12-15 21:58 ` Rob Herring
2017-12-05 14:06 ` [PATCH v2 2/5] ARM: dts: imx53: add srtc node linux-kernel-dev
2017-12-05 14:06 ` linux-kernel-dev at beckhoff.com
2017-12-05 14:13 ` Fabio Estevam
2017-12-05 14:13 ` Fabio Estevam
2017-12-05 14:13 ` Fabio Estevam
2017-12-05 14:20 ` Patrick Brünn
2017-12-05 14:20 ` Patrick Brünn
2017-12-05 14:20 ` Patrick Brünn
2017-12-05 14:20 ` Patrick Brünn
2017-12-10 19:03 ` Fabio Estevam
2017-12-10 19:03 ` Fabio Estevam
2017-12-10 19:03 ` Fabio Estevam
2017-12-10 19:03 ` Fabio Estevam
2017-12-05 14:06 ` [PATCH v2 3/5] rtc: mxc_v2: add driver for i.MX53 SRTC linux-kernel-dev
2017-12-05 14:06 ` linux-kernel-dev-QonKdJ6Bx35Wk0Htik3J/w
2017-12-05 14:06 ` linux-kernel-dev at beckhoff.com
2017-12-05 14:12 ` Fabio Estevam
2017-12-05 14:12 ` Fabio Estevam
2017-12-05 14:12 ` Fabio Estevam
2017-12-05 14:06 ` [PATCH v2 4/5] ARM: imx_v4_v5_defconfig: enable RTC_DRV_MXC_V2 linux-kernel-dev
2017-12-05 14:06 ` linux-kernel-dev-QonKdJ6Bx35Wk0Htik3J/w
2017-12-05 14:06 ` linux-kernel-dev at beckhoff.com
2017-12-05 14:10 ` Fabio Estevam
2017-12-05 14:10 ` Fabio Estevam
2017-12-05 14:10 ` Fabio Estevam
2017-12-05 14:06 ` linux-kernel-dev [this message]
2017-12-05 14:06 ` [PATCH v2 5/5] rtc: add mxc driver for i.MX53 SRTC linux-kernel-dev at beckhoff.com
2017-12-06 8:36 ` Sascha Hauer
2017-12-06 8:36 ` Sascha Hauer
2017-12-06 8:36 ` Sascha Hauer
2017-12-06 8:58 ` Alexandre Belloni
2017-12-06 8:58 ` Alexandre Belloni
2017-12-06 8:58 ` Alexandre Belloni
2017-12-06 9:28 ` Patrick Brünn
2017-12-06 9:28 ` Patrick Brünn
2017-12-06 9:28 ` Patrick Brünn
2017-12-06 10:17 ` Patrick Brünn
2017-12-06 10:17 ` Patrick Brünn
2017-12-06 10:17 ` Patrick Brünn
2017-12-06 14:40 ` Sascha Hauer
2017-12-06 14:40 ` Sascha Hauer
2017-12-06 14:40 ` Sascha Hauer
2017-12-06 11:05 ` Alexandre Belloni
2017-12-06 11:05 ` Alexandre Belloni
2017-12-06 11:05 ` Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171205140646.30367-6-linux-kernel-dev@beckhoff.com \
--to=linux-kernel-dev@beckhoff.com \
--cc=LW@KARO-electronics.de \
--cc=Noel.Vellemans@visionbms.com \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@free-electrons.com \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=jbe@pengutronix.de \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=p.bruenn@beckhoff.com \
--cc=pombredanne@nexb.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.