From: David Hildenbrand <david@redhat.com>
To: qemu-s390x@nongnu.org, qemu-devel@nongnu.org
Cc: Christian Borntraeger <borntraeger@de.ibm.com>,
Cornelia Huck <cohuck@redhat.com>,
Richard Henderson <rth@twiddle.net>,
Alexander Graf <agraf@suse.de>,
David Hildenbrand <david@redhat.com>
Subject: [Qemu-devel] [PATCH v3 for-2.12 02/14] s390x/tcg: fix and cleanup mcck injection
Date: Fri, 8 Dec 2017 17:01:55 +0100 [thread overview]
Message-ID: <20171208160207.26494-3-david@redhat.com> (raw)
In-Reply-To: <20171208160207.26494-1-david@redhat.com>
The architecture mode indication wasn't stored. The split of certain
64bit fields was unnecessary. Also, the complete clock comparator, not
just bit 0-55 (starting at byte 1) was stored.
We now generate a proper MCIC via the same helper we use for KVM.
There is more to clean up, but we will change the other parts later on
either way.
Signed-off-by: David Hildenbrand <david@redhat.com>
---
target/s390x/excp_helper.c | 12 ++++++------
target/s390x/internal.h | 6 +++---
2 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/target/s390x/excp_helper.c b/target/s390x/excp_helper.c
index d831537544..f4697a884d 100644
--- a/target/s390x/excp_helper.c
+++ b/target/s390x/excp_helper.c
@@ -395,6 +395,9 @@ static void do_mchk_interrupt(CPUS390XState *env)
lowcore = cpu_map_lowcore(env);
+ /* we are always in z/Architecture mode */
+ lowcore->ar_access_id = 1;
+
for (i = 0; i < 16; i++) {
lowcore->floating_pt_save_area[i] = cpu_to_be64(get_freg(env, i)->ll);
lowcore->gpregs_save_area[i] = cpu_to_be64(env->regs[i]);
@@ -404,13 +407,10 @@ static void do_mchk_interrupt(CPUS390XState *env)
lowcore->prefixreg_save_area = cpu_to_be32(env->psa);
lowcore->fpt_creg_save_area = cpu_to_be32(env->fpc);
lowcore->tod_progreg_save_area = cpu_to_be32(env->todpr);
- lowcore->cpu_timer_save_area[0] = cpu_to_be32(env->cputm >> 32);
- lowcore->cpu_timer_save_area[1] = cpu_to_be32((uint32_t)env->cputm);
- lowcore->clock_comp_save_area[0] = cpu_to_be32(env->ckc >> 32);
- lowcore->clock_comp_save_area[1] = cpu_to_be32((uint32_t)env->ckc);
+ lowcore->cpu_timer_save_area = cpu_to_be64(env->cputm);
+ lowcore->clock_comp_save_area = cpu_to_be64(env->ckc >> 8);
- lowcore->mcck_interruption_code[0] = cpu_to_be32(0x00400f1d);
- lowcore->mcck_interruption_code[1] = cpu_to_be32(0x40330000);
+ lowcore->mcic = cpu_to_be64(s390_build_validity_mcic() | MCIC_SC_CP);
lowcore->mcck_old_psw.mask = cpu_to_be64(get_psw_mask(env));
lowcore->mcck_old_psw.addr = cpu_to_be64(env->psw.addr);
mask = be64_to_cpu(lowcore->mcck_new_psw.mask);
diff --git a/target/s390x/internal.h b/target/s390x/internal.h
index 6817b2c432..1a88e4beb4 100644
--- a/target/s390x/internal.h
+++ b/target/s390x/internal.h
@@ -43,7 +43,7 @@ typedef struct LowCore {
uint8_t pad3[0xc8 - 0xc4]; /* 0x0c4 */
uint32_t stfl_fac_list; /* 0x0c8 */
uint8_t pad4[0xe8 - 0xcc]; /* 0x0cc */
- uint32_t mcck_interruption_code[2]; /* 0x0e8 */
+ uint64_t mcic; /* 0x0e8 */
uint8_t pad5[0xf4 - 0xf0]; /* 0x0f0 */
uint32_t external_damage_code; /* 0x0f4 */
uint64_t failing_storage_address; /* 0x0f8 */
@@ -118,8 +118,8 @@ typedef struct LowCore {
uint32_t fpt_creg_save_area; /* 0x131c */
uint8_t pad16[0x1324 - 0x1320]; /* 0x1320 */
uint32_t tod_progreg_save_area; /* 0x1324 */
- uint32_t cpu_timer_save_area[2]; /* 0x1328 */
- uint32_t clock_comp_save_area[2]; /* 0x1330 */
+ uint64_t cpu_timer_save_area; /* 0x1328 */
+ uint64_t clock_comp_save_area; /* 0x1330 */
uint8_t pad17[0x1340 - 0x1338]; /* 0x1338 */
uint32_t access_regs_save_area[16]; /* 0x1340 */
uint64_t cregs_save_area[16]; /* 0x1380 */
--
2.14.3
next prev parent reply other threads:[~2017-12-08 16:02 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-08 16:01 [Qemu-devel] [PATCH v3 for-2.12 00/14] s390x/tcg: CCW hotplug, facilities, instructions David Hildenbrand
2017-12-08 16:01 ` [Qemu-devel] [PATCH v3 for-2.12 01/14] s390x/kvm: factor out build_channel_report_mcic() into cpu.h David Hildenbrand
2017-12-09 2:17 ` Richard Henderson
2017-12-08 16:01 ` David Hildenbrand [this message]
2017-12-08 16:01 ` [Qemu-devel] [PATCH v3 for-2.12 03/14] s390x/tcg: implement SET CLOCK PROGRAMMABLE FIELD David Hildenbrand
2017-12-09 2:20 ` Richard Henderson
2017-12-08 16:01 ` [Qemu-devel] [PATCH v3 for-2.12 04/14] s390x/tcg: indicate value of TODPR in STCKE David Hildenbrand
2017-12-08 16:01 ` [Qemu-devel] [PATCH v3 for-2.12 05/14] s390x/tcg: wire up STORE CHANNEL REPORT WORD David Hildenbrand
2017-12-08 16:01 ` [Qemu-devel] [PATCH v3 for-2.12 06/14] s390x/tcg: ASI/ASGI/ALSI/ALSGI are atomic with Interlocked-acccess facility 1 David Hildenbrand
2017-12-08 16:02 ` [Qemu-devel] [PATCH v3 for-2.12 07/14] s390x/tcg: implement Interlocked-Access Facility 2 David Hildenbrand
2017-12-08 16:02 ` [Qemu-devel] [PATCH v3 for-2.12 08/14] s390x/tcg: wire up SET ADDRESS LIMIT David Hildenbrand
2017-12-08 16:02 ` [Qemu-devel] [PATCH v3 for-2.12 09/14] s390x/tcg: wire up SET CHANNEL MONITOR David Hildenbrand
2017-12-08 16:02 ` [Qemu-devel] [PATCH v3 for-2.12 10/14] s390x/tcg: Implement STORE CHANNEL PATH STATUS David Hildenbrand
2017-12-08 16:02 ` [Qemu-devel] [PATCH v3 for-2.12 11/14] s390x/tcg: Implement SIGNAL ADAPTER instruction David Hildenbrand
2017-12-08 16:02 ` [Qemu-devel] [PATCH v3 for-2.12 12/14] s390x/tcg: implement extract-CPU-time facility David Hildenbrand
2017-12-08 16:02 ` [Qemu-devel] [PATCH v3 for-2.12 13/14] s390x/tcg: we already implement the Set-Program-Parameter facility David Hildenbrand
2017-12-08 16:02 ` [Qemu-devel] [PATCH v3 for-2.12 14/14] s390x: change the QEMU cpu model to a stripped down z12 David Hildenbrand
2017-12-08 16:26 ` Cornelia Huck
2017-12-08 16:29 ` David Hildenbrand
2017-12-08 16:34 ` Daniel P. Berrange
2017-12-08 16:39 ` David Hildenbrand
2017-12-08 16:55 ` [Qemu-devel] [PATCH v4 for-2-12] " David Hildenbrand
2017-12-13 13:24 ` [Qemu-devel] [PATCH v1] s390x/cpumodel: make qemu cpu model play with "none" machine David Hildenbrand
2017-12-13 13:34 ` [Qemu-devel] [qemu-s390x] " Christian Borntraeger
2017-12-13 13:38 ` David Hildenbrand
2017-12-13 17:17 ` [Qemu-devel] " Cornelia Huck
2017-12-14 12:18 ` Cornelia Huck
2017-12-13 17:15 ` [Qemu-devel] [PATCH v1] s390x/tcg: don't include z13 features in the qemu model David Hildenbrand
2017-12-13 17:21 ` Cornelia Huck
2017-12-14 12:19 ` Cornelia Huck
2017-12-11 10:13 ` [Qemu-devel] [PATCH v3 for-2.12 00/14] s390x/tcg: CCW hotplug, facilities, instructions Cornelia Huck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171208160207.26494-3-david@redhat.com \
--to=david@redhat.com \
--cc=agraf@suse.de \
--cc=borntraeger@de.ibm.com \
--cc=cohuck@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-s390x@nongnu.org \
--cc=rth@twiddle.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.