From: "Radim Krčmář" <rkrcmar@redhat.com>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>,
linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Subject: [GIT PULL] KVM fixes for v4.15-rc3
Date: Sat, 9 Dec 2017 17:46:07 +0100 [thread overview]
Message-ID: <20171209164603.GA29603@flask> (raw)
Linus,
The following changes since commit ae64f9bd1d3621b5e60d7363bc20afb46aede215:
Linux 4.15-rc2 (2017-12-03 11:01:47 -0500)
are available in the Git repository at:
git://git.kernel.org/pub/scm/virt/kvm/kvm for-linus
for you to fetch changes up to b1394e745b9453dcb5b0671c205b770e87dedb87:
KVM: x86: fix APIC page invalidation (2017-12-06 16:10:34 +0100)
----------------------------------------------------------------
KVM fixes for v4.15-rc3
ARM:
* A number of issues in the vgic discovered using SMATCH
* A bit one-off calculation in out stage base address mask (32-bit and
64-bit)
* Fixes to single-step debugging instructions that trap for other
reasons such as MMMIO aborts
* Printing unavailable hyp mode as error
* Potential spinlock deadlock in the vgic
* Avoid calling vgic vcpu free more than once
* Broken bit calculation for big endian systems
s390:
* SPDX tags
* Fence storage key accesses from problem state
* Make sure that irq_state.flags is not used in the future
x86:
* Intercept port 0x80 accesses to prevent host instability (CVE)
* Use userspace FPU context for guest FPU (mainly an optimization that
fixes a double use of kernel FPU)
* Do not leak one page per module load
* Flush APIC page address cache from MMU invalidation notifiers
----------------------------------------------------------------
Alex Bennée (5):
KVM: arm/arm64: debug: Introduce helper for single-step
kvm: arm64: handle single-stepping trapped instructions
kvm: arm64: handle single-step of userspace mmio instructions
kvm: arm64: handle single-step during SError exceptions
kvm: arm64: handle single-step of hyp emulated mmio instructions
Andre Przywara (1):
KVM: arm/arm64: VGIC: extend !vgic_is_initialized guard
Andrew Honig (1):
KVM: VMX: remove I/O port 0x80 bypass on Intel hosts
Andrew Jones (1):
KVM: arm/arm64: kvm_arch_destroy_vm cleanups
Ard Biesheuvel (1):
kvm: arm: don't treat unavailable HYP mode as an error
Christian Borntraeger (1):
KVM: s390: mark irq_state.flags as non-usable
Christoffer Dall (3):
KVM: arm/arm64: Don't enable/disable physical timer access on VHE
KVM: arm/arm64: Avoid attempting to load timer vgic state without a vgic
KVM: arm/arm64: Fix broken GICH_ELRSR big endian conversion
Greg Kroah-Hartman (2):
KVM: s390: add SPDX identifiers to the remaining files
KVM: s390: Remove redundant license text
Janosch Frank (1):
KVM: s390: Fix skey emulation permission check
Jim Mattson (1):
KVM: VMX: fix page leak in hardware_setup()
Kristina Martsenko (1):
arm64: KVM: fix VTTBR_BADDR_MASK BUG_ON off-by-one
Marc Zyngier (7):
KVM: arm/arm64: vgic-irqfd: Fix MSI entry allocation
KVM: arm/arm64: vgic: Preserve the revious read from the pending table
KVM: arm/arm64: vgic-its: Preserve the revious read from the pending table
KVM: arm/arm64: vgic-its: Check result of allocation before use
KVM: arm/arm64: vgic-v4: Only perform an unmap for valid vLPIs
arm: KVM: Fix VTTBR_BADDR_MASK BUG_ON off-by-one
KVM: arm/arm64: Fix spinlock acquisition in vgic_set_owner
Radim Krčmář (3):
Merge tag 'kvm-arm-fixes-for-v4.15-1' of git://git.kernel.org/.../kvmarm/kvmarm
Merge tag 'kvm-s390-master-4.15-1' of git://git.kernel.org/.../kvms390/linux
KVM: x86: fix APIC page invalidation
Rik van Riel (2):
x86,kvm: move qemu/guest FPU switching out to vcpu_run
x86,kvm: remove KVM emulator get_fpu / put_fpu
Documentation/virtual/kvm/api.txt | 15 +++++++--
arch/arm/include/asm/kvm_arm.h | 3 +-
arch/arm/include/asm/kvm_host.h | 5 +++
arch/arm64/include/asm/kvm_arm.h | 3 +-
arch/arm64/include/asm/kvm_host.h | 1 +
arch/arm64/kvm/debug.c | 21 +++++++++++++
arch/arm64/kvm/handle_exit.c | 57 +++++++++++++++++++++++++---------
arch/arm64/kvm/hyp/switch.c | 37 +++++++++++++++++-----
arch/s390/kvm/Makefile | 5 +--
arch/s390/kvm/diag.c | 5 +--
arch/s390/kvm/gaccess.h | 5 +--
arch/s390/kvm/guestdbg.c | 5 +--
arch/s390/kvm/intercept.c | 5 +--
arch/s390/kvm/interrupt.c | 5 +--
arch/s390/kvm/irq.h | 5 +--
arch/s390/kvm/kvm-s390.c | 11 +++----
arch/s390/kvm/kvm-s390.h | 5 +--
arch/s390/kvm/priv.c | 16 ++++++----
arch/s390/kvm/sigp.c | 5 +--
arch/s390/kvm/vsie.c | 5 +--
arch/x86/include/asm/kvm_emulate.h | 2 --
arch/x86/include/asm/kvm_host.h | 16 ++++++++++
arch/x86/kvm/emulate.c | 24 ---------------
arch/x86/kvm/vmx.c | 6 ----
arch/x86/kvm/x86.c | 63 +++++++++++++++++++-------------------
include/kvm/arm_arch_timer.h | 3 --
include/linux/kvm_host.h | 2 +-
include/uapi/linux/kvm.h | 4 +--
virt/kvm/arm/arch_timer.c | 11 +++----
virt/kvm/arm/arm.c | 7 +++--
virt/kvm/arm/hyp/timer-sr.c | 48 ++++++++++++-----------------
virt/kvm/arm/hyp/vgic-v2-sr.c | 4 ---
virt/kvm/arm/vgic/vgic-irqfd.c | 3 +-
virt/kvm/arm/vgic/vgic-its.c | 4 ++-
virt/kvm/arm/vgic/vgic-v3.c | 2 +-
virt/kvm/arm/vgic/vgic-v4.c | 6 ++--
virt/kvm/arm/vgic/vgic.c | 8 +++--
virt/kvm/kvm_main.c | 8 +++++
38 files changed, 239 insertions(+), 201 deletions(-)
reply other threads:[~2017-12-09 16:46 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171209164603.GA29603@flask \
--to=rkrcmar@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.