From: Jonathan Cameron <jic23@kernel.org>
To: Andreas Klinger <ak@it-klinger.de>
Cc: knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net,
singhalsimran0@gmail.com, linux-iio@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 1/2] iio: hx711: add triggered buffer support
Date: Sun, 17 Dec 2017 12:45:45 +0000 [thread overview]
Message-ID: <20171217124545.214eaac9@archlinux> (raw)
In-Reply-To: <20171213170935.GA25191@arbeit>
On Wed, 13 Dec 2017 18:10:11 +0100
Andreas Klinger <ak@it-klinger.de> wrote:
> Add buffer to device data struct and add trigger function
>
> Data format is quite simple:
> voltage - channel 0 32 Bit
> voltage - channel 1 32 Bit
> timestamp 64 Bit
>
> Using both channels at the same time is working quite slow because of
> changing the channel which needs a dummy read.
>
> Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Looks good.
Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to play with it.
Thanks,
Jonathan
> ---
> drivers/iio/adc/Kconfig | 2 +
> drivers/iio/adc/hx711.c | 121 +++++++++++++++++++++++++++++++++++++++---------
> 2 files changed, 100 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index af4fc1279409..a83642e517d5 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -316,6 +316,8 @@ config HI8435
> config HX711
> tristate "AVIA HX711 ADC for weight cells"
> depends on GPIOLIB
> + select IIO_BUFFER
> + select IIO_TRIGGERED_BUFFER
> help
> If you say yes here you get support for AVIA HX711 ADC which is used
> for weigh cells
> diff --git a/drivers/iio/adc/hx711.c b/drivers/iio/adc/hx711.c
> index d10b9f13d557..a38162ee7dcb 100644
> --- a/drivers/iio/adc/hx711.c
> +++ b/drivers/iio/adc/hx711.c
> @@ -24,6 +24,9 @@
> #include <linux/delay.h>
> #include <linux/iio/iio.h>
> #include <linux/iio/sysfs.h>
> +#include <linux/iio/buffer.h>
> +#include <linux/iio/trigger_consumer.h>
> +#include <linux/iio/triggered_buffer.h>
> #include <linux/gpio/consumer.h>
> #include <linux/regulator/consumer.h>
>
> @@ -89,6 +92,11 @@ struct hx711_data {
> int gain_set; /* gain set on device */
> int gain_chan_a; /* gain for channel A */
> struct mutex lock;
> + /*
> + * triggered buffer
> + * 2x32-bit channel + 64-bit timestamp
> + */
> + u32 buffer[4];
> };
>
> static int hx711_cycle(struct hx711_data *hx711_data)
> @@ -236,34 +244,40 @@ static int hx711_set_gain_for_channel(struct hx711_data *hx711_data, int chan)
> return 0;
> }
>
> +static int hx711_reset_read(struct hx711_data *hx711_data, int chan)
> +{
> + int ret;
> + int val;
> +
> + /*
> + * hx711_reset() must be called from here
> + * because it could be calling hx711_read() by itself
> + */
> + if (hx711_reset(hx711_data)) {
> + dev_err(hx711_data->dev, "reset failed!");
> + return -EIO;
> + }
> +
> + ret = hx711_set_gain_for_channel(hx711_data, chan);
> + if (ret < 0)
> + return ret;
> +
> + val = hx711_read(hx711_data);
> +
> + return val;
> +}
> +
> static int hx711_read_raw(struct iio_dev *indio_dev,
> const struct iio_chan_spec *chan,
> int *val, int *val2, long mask)
> {
> struct hx711_data *hx711_data = iio_priv(indio_dev);
> - int ret;
>
> switch (mask) {
> case IIO_CHAN_INFO_RAW:
> mutex_lock(&hx711_data->lock);
>
> - /*
> - * hx711_reset() must be called from here
> - * because it could be calling hx711_read() by itself
> - */
> - if (hx711_reset(hx711_data)) {
> - mutex_unlock(&hx711_data->lock);
> - dev_err(hx711_data->dev, "reset failed!");
> - return -EIO;
> - }
> -
> - ret = hx711_set_gain_for_channel(hx711_data, chan->channel);
> - if (ret < 0) {
> - mutex_unlock(&hx711_data->lock);
> - return ret;
> - }
> -
> - *val = hx711_read(hx711_data);
> + *val = hx711_reset_read(hx711_data, chan->channel);
>
> mutex_unlock(&hx711_data->lock);
>
> @@ -339,6 +353,36 @@ static int hx711_write_raw_get_fmt(struct iio_dev *indio_dev,
> return IIO_VAL_INT_PLUS_NANO;
> }
>
> +static irqreturn_t hx711_trigger(int irq, void *p)
> +{
> + struct iio_poll_func *pf = p;
> + struct iio_dev *indio_dev = pf->indio_dev;
> + struct hx711_data *hx711_data = iio_priv(indio_dev);
> + int i, j = 0;
> +
> + mutex_lock(&hx711_data->lock);
> +
> + memset(hx711_data->buffer, 0, sizeof(hx711_data->buffer));
> +
> + for (i = 0; i < indio_dev->masklength; i++) {
> + if (!test_bit(i, indio_dev->active_scan_mask))
> + continue;
> +
> + hx711_data->buffer[j] = hx711_reset_read(hx711_data,
> + indio_dev->channels[i].channel);
> + j++;
> + }
> +
> + iio_push_to_buffers_with_timestamp(indio_dev, hx711_data->buffer,
> + pf->timestamp);
> +
> + mutex_unlock(&hx711_data->lock);
> +
> + iio_trigger_notify_done(indio_dev->trig);
> +
> + return IRQ_HANDLED;
> +}
> +
> static ssize_t hx711_scale_available_show(struct device *dev,
> struct device_attribute *attr,
> char *buf)
> @@ -387,6 +431,13 @@ static const struct iio_chan_spec hx711_chan_spec[] = {
> .indexed = 1,
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
> + .scan_index = 0,
> + .scan_type = {
> + .sign = 'u',
> + .realbits = 24,
> + .storagebits = 32,
> + .endianness = IIO_CPU,
> + },
> },
> {
> .type = IIO_VOLTAGE,
> @@ -394,7 +445,15 @@ static const struct iio_chan_spec hx711_chan_spec[] = {
> .indexed = 1,
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
> + .scan_index = 1,
> + .scan_type = {
> + .sign = 'u',
> + .realbits = 24,
> + .storagebits = 32,
> + .endianness = IIO_CPU,
> + },
> },
> + IIO_CHAN_SOFT_TIMESTAMP(2),
> };
>
> static int hx711_probe(struct platform_device *pdev)
> @@ -459,10 +518,9 @@ static int hx711_probe(struct platform_device *pdev)
> * 1 LSB = (AVDD * 100) / GAIN / 1678 [10^-9 mV]
> */
> ret = regulator_get_voltage(hx711_data->reg_avdd);
> - if (ret < 0) {
> - regulator_disable(hx711_data->reg_avdd);
> - return ret;
> - }
> + if (ret < 0)
> + goto error_regulator;
> +
> /* we need 10^-9 mV */
> ret *= 100;
>
> @@ -482,12 +540,27 @@ static int hx711_probe(struct platform_device *pdev)
> indio_dev->channels = hx711_chan_spec;
> indio_dev->num_channels = ARRAY_SIZE(hx711_chan_spec);
>
> + ret = iio_triggered_buffer_setup(indio_dev, iio_pollfunc_store_time,
> + hx711_trigger, NULL);
> + if (ret < 0) {
> + dev_err(dev, "setup of iio triggered buffer failed\n");
> + goto error_regulator;
> + }
> +
> ret = iio_device_register(indio_dev);
> if (ret < 0) {
> dev_err(dev, "Couldn't register the device\n");
> - regulator_disable(hx711_data->reg_avdd);
> + goto error_buffer;
> }
>
> + return 0;
> +
> +error_buffer:
> + iio_triggered_buffer_cleanup(indio_dev);
> +
> +error_regulator:
> + regulator_disable(hx711_data->reg_avdd);
> +
> return ret;
> }
>
> @@ -501,6 +574,8 @@ static int hx711_remove(struct platform_device *pdev)
>
> iio_device_unregister(indio_dev);
>
> + iio_triggered_buffer_cleanup(indio_dev);
> +
> regulator_disable(hx711_data->reg_avdd);
>
> return 0;
prev parent reply other threads:[~2017-12-17 12:45 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-13 17:10 [PATCH v4 1/2] iio: hx711: add triggered buffer support Andreas Klinger
2017-12-17 12:45 ` Jonathan Cameron [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171217124545.214eaac9@archlinux \
--to=jic23@kernel.org \
--cc=ak@it-klinger.de \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
--cc=singhalsimran0@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.