[U-Boot] [PATCH v2 2/4] arm: imx: cx9020: move dram init into common place

[linux-kernel-dev at beckhoff.com <linux-kernel-dev@beckhoff.com>]

From: Patrick Bruenn <p.bruenn@beckhoff.com>

Move dram_init(), dram_init_banksize() and get_effective_memsize() to
arch/arm/mach-imx/mx5/mx53_dram.c, where it can be reused by m53evk and
mx53loco.

Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>

---

Changes in v2: None

Patch-Cc:  Fabio Estevam <fabio.estevam@nxp.com>
Patch-Cc:  Christian Gmeiner <christian.gmeiner@gmail.com>
Patch-Cc:  Jason Liu <r64343@freescale.com>
Patch-Cc:  Patrick Bruenn <p.bruenn@beckhoff.com>
Patch-Cc:  Stefano Babic <sbabic@denx.de>
Patch-Cc:  u-boot at lists.denx.de
Patch-Cc:  Marek Vasut <marex@denx.de>
Patch-Cc:  Albert Aribaud <albert.u.boot@aribaud.net>

---
 arch/arm/mach-imx/mx5/Makefile         |  3 +++
 arch/arm/mach-imx/mx5/mx53_dram.c      | 45 ++++++++++++++++++++++++++++++++++
 board/beckhoff/mx53cx9020/mx53cx9020.c | 35 --------------------------
 3 files changed, 48 insertions(+), 35 deletions(-)
 create mode 100644 arch/arm/mach-imx/mx5/mx53_dram.c

diff --git a/arch/arm/mach-imx/mx5/Makefile b/arch/arm/mach-imx/mx5/Makefile
index d021842f68..368cfde98b 100644
--- a/arch/arm/mach-imx/mx5/Makefile
+++ b/arch/arm/mach-imx/mx5/Makefile
@@ -9,3 +9,6 @@
 
 obj-y := soc.o clock.o
 obj-y += lowlevel_init.o
+
+# common files for mx53 dram initialization
+obj-$(CONFIG_TARGET_MX53CX9020) += mx53_dram.o
diff --git a/arch/arm/mach-imx/mx5/mx53_dram.c b/arch/arm/mach-imx/mx5/mx53_dram.c
new file mode 100644
index 0000000000..7e5fc42d1f
--- /dev/null
+++ b/arch/arm/mach-imx/mx5/mx53_dram.c
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2017  Beckhoff Automation GmbH & Co. KG
+ * Patrick Bruenn <p.bruenn@beckhoff.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+phys_size_t get_effective_memsize(void)
+{
+	/*
+	 * WARNING: We must override get_effective_memsize() function here
+	 * to report only the size of the first DRAM bank. This is to make
+	 * U-Boot relocator place U-Boot into valid memory, that is, at the
+	 * end of the first DRAM bank. If we did not override this function
+	 * like so, U-Boot would be placed at the address of the first DRAM
+	 * bank + total DRAM size - sizeof(uboot), which in the setup where
+	 * each DRAM bank contains 512MiB of DRAM would result in placing
+	 * U-Boot into invalid memory area close to the end of the first
+	 * DRAM bank.
+	 */
+	return get_ram_size((void *)PHYS_SDRAM_1, 1 << 30);
+}
+
+int dram_init(void)
+{
+	gd->ram_size = get_ram_size((void *)PHYS_SDRAM_1, 1 << 30);
+	gd->ram_size += get_ram_size((void *)PHYS_SDRAM_2, 1 << 30);
+
+	return 0;
+}
+
+int dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = get_ram_size((void *)PHYS_SDRAM_1, 1 << 30);
+
+	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+	gd->bd->bi_dram[1].size = get_ram_size((void *)PHYS_SDRAM_2, 1 << 30);
+
+	return 0;
+}
diff --git a/board/beckhoff/mx53cx9020/mx53cx9020.c b/board/beckhoff/mx53cx9020/mx53cx9020.c
index d8bdfc27bb..f9df3604cd 100644
--- a/board/beckhoff/mx53cx9020/mx53cx9020.c
+++ b/board/beckhoff/mx53cx9020/mx53cx9020.c
@@ -59,41 +59,6 @@ static const u32 CCAT_MODE_RUN = 0x0033DC8F;
 
 DECLARE_GLOBAL_DATA_PTR;
 
-phys_size_t get_effective_memsize(void)
-{
-	/*
-	 * WARNING: We must override get_effective_memsize() function here
-	 * to report only the size of the first DRAM bank. This is to make
-	 * U-Boot relocator place U-Boot into valid memory, that is, at the
-	 * end of the first DRAM bank. If we did not override this function
-	 * like so, U-Boot would be placed@the address of the first DRAM
-	 * bank + total DRAM size - sizeof(uboot), which in the setup where
-	 * each DRAM bank contains 512MiB of DRAM would result in placing
-	 * U-Boot into invalid memory area close to the end of the first
-	 * DRAM bank.
-	 */
-	return get_ram_size((void *)PHYS_SDRAM_1, 1 << 30);
-}
-
-int dram_init(void)
-{
-	gd->ram_size = get_ram_size((void *)PHYS_SDRAM_1, 1 << 30);
-	gd->ram_size += get_ram_size((void *)PHYS_SDRAM_2, 1 << 30);
-
-	return 0;
-}
-
-int dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = get_ram_size((void *)PHYS_SDRAM_1, 1 << 30);
-
-	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
-	gd->bd->bi_dram[1].size = get_ram_size((void *)PHYS_SDRAM_2, 1 << 30);
-
-	return 0;
-}
-
 u32 get_board_rev(void)
 {
 	struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
-- 
2.11.0