From: Stephen Hemminger <stephen@networkplumber.org>
To: dev@dpdk.org
Cc: Stephen Hemminger <stephen@networkplumber.org>
Subject: [PATCH 04/11] ixgbe: implement dynamic logging
Date: Mon, 18 Dec 2017 22:38:33 -0800 [thread overview]
Message-ID: <20171219063840.18981-5-stephen@networkplumber.org> (raw)
In-Reply-To: <20171219063840.18981-1-stephen@networkplumber.org>
Convert all drivers possible to dynamic logging.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
config/common_base | 2 --
drivers/net/ixgbe/ixgbe_ethdev.c | 15 +++++++++++++++
drivers/net/ixgbe/ixgbe_logs.h | 16 ++++++----------
3 files changed, 21 insertions(+), 12 deletions(-)
diff --git a/config/common_base b/config/common_base
index 8b63f205d9b9..333689f052f5 100644
--- a/config/common_base
+++ b/config/common_base
@@ -188,11 +188,9 @@ CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
# Compile burst-oriented IXGBE PMD driver
#
CONFIG_RTE_LIBRTE_IXGBE_PMD=y
-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_DRIVER=n
CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
CONFIG_RTE_IXGBE_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index ff19a564a42e..0946617b2e16 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -427,6 +427,9 @@ static void ixgbe_l2_tunnel_conf(struct rte_eth_dev *dev);
(r) = (h)->bitmap[idx] >> bit & 1;\
} while (0)
+int ixgbe_logtype_init;
+int ixgbe_logtype_driver;
+
/*
* The set of PCI devices this driver supports
*/
@@ -8444,3 +8447,15 @@ RTE_PMD_REGISTER_KMOD_DEP(net_ixgbe, "* igb_uio | uio_pci_generic | vfio-pci");
RTE_PMD_REGISTER_PCI(net_ixgbe_vf, rte_ixgbevf_pmd);
RTE_PMD_REGISTER_PCI_TABLE(net_ixgbe_vf, pci_id_ixgbevf_map);
RTE_PMD_REGISTER_KMOD_DEP(net_ixgbe_vf, "* igb_uio | vfio-pci");
+
+RTE_INIT(ixgbe_init_log);
+static void
+ixgbe_init_log(void)
+{
+ ixgbe_logtype_init = rte_log_register("pmd.ixgbe.init");
+ if (ixgbe_logtype_init >= 0)
+ rte_log_set_level(ixgbe_logtype_init, RTE_LOG_NOTICE);
+ ixgbe_logtype_driver = rte_log_register("pmd.ixgbe.driver");
+ if (ixgbe_logtype_driver >= 0)
+ rte_log_set_level(ixgbe_logtype_driver, RTE_LOG_NOTICE);
+}
diff --git a/drivers/net/ixgbe/ixgbe_logs.h b/drivers/net/ixgbe/ixgbe_logs.h
index 53ba42d927f6..9dfa238f2fc0 100644
--- a/drivers/net/ixgbe/ixgbe_logs.h
+++ b/drivers/net/ixgbe/ixgbe_logs.h
@@ -34,14 +34,12 @@
#ifndef _IXGBE_LOGS_H_
#define _IXGBE_LOGS_H_
+extern int ixgbe_logtype_init;
#define PMD_INIT_LOG(level, fmt, args...) \
- RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ##args)
+ rte_log(RTE_LOG_ ## level, ixgbe_logtype_init, \
+ "%s(): " fmt "\n", __func__, ##args)
-#ifdef RTE_LIBRTE_IXGBE_DEBUG_INIT
#define PMD_INIT_FUNC_TRACE() PMD_INIT_LOG(DEBUG, " >>")
-#else
-#define PMD_INIT_FUNC_TRACE() do { } while(0)
-#endif
#ifdef RTE_LIBRTE_IXGBE_DEBUG_RX
#define PMD_RX_LOG(level, fmt, args...) \
@@ -64,12 +62,10 @@
#define PMD_TX_FREE_LOG(level, fmt, args...) do { } while(0)
#endif
-#ifdef RTE_LIBRTE_IXGBE_DEBUG_DRIVER
+extern int ixgbe_logtype_driver;
#define PMD_DRV_LOG_RAW(level, fmt, args...) \
- RTE_LOG(level, PMD, "%s(): " fmt, __func__, ## args)
-#else
-#define PMD_DRV_LOG_RAW(level, fmt, args...) do { } while (0)
-#endif
+ rte_log(RTE_LOG_ ## level, ixgbe_logtype_driver, "%s(): " fmt, \
+ __func__, ## args)
#define PMD_DRV_LOG(level, fmt, args...) \
PMD_DRV_LOG_RAW(level, fmt "\n", ## args)
--
2.11.0
next prev parent reply other threads:[~2017-12-19 6:38 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-19 6:38 [PATCH 00/11] Dynamic logging (just do it) Stephen Hemminger
2017-12-19 6:38 ` [PATCH 01/11] avp: implement dynamic logging Stephen Hemminger
2017-12-20 1:53 ` Ferruh Yigit
2017-12-20 18:58 ` Stephen Hemminger
2017-12-21 18:02 ` Ferruh Yigit
2017-12-22 13:45 ` Olivier MATZ
2017-12-19 6:38 ` [PATCH 02/11] bnx2x: " Stephen Hemminger
2017-12-20 1:51 ` Ferruh Yigit
2017-12-20 18:58 ` Stephen Hemminger
2017-12-19 6:38 ` [PATCH 03/11] vmxnet3: " Stephen Hemminger
2017-12-19 6:38 ` Stephen Hemminger [this message]
2017-12-19 6:38 ` [PATCH 05/11] e1000: " Stephen Hemminger
2017-12-19 6:38 ` [PATCH 06/11] virtio: " Stephen Hemminger
2018-01-09 9:18 ` Maxime Coquelin
2017-12-19 6:38 ` [PATCH 07/11] nfp: " Stephen Hemminger
2017-12-20 1:52 ` Ferruh Yigit
2017-12-19 6:38 ` [PATCH 08/11] fm10k: " Stephen Hemminger
2017-12-19 6:38 ` [PATCH 09/11] ena: " Stephen Hemminger
2017-12-19 6:38 ` [PATCH 10/11] qede: " Stephen Hemminger
2017-12-19 6:38 ` [PATCH 11/11] lio: " Stephen Hemminger
2017-12-20 1:51 ` [PATCH 00/11] Dynamic logging (just do it) Ferruh Yigit
2017-12-20 18:59 ` Stephen Hemminger
2018-01-09 12:10 ` [PATCH v2 01/12] net/avp: implement dynamic logging Ferruh Yigit
2018-01-09 12:10 ` [PATCH v2 02/12] net/bnx2x: " Ferruh Yigit
2018-01-09 12:10 ` [PATCH v2 03/12] net/vmxnet3: " Ferruh Yigit
2018-01-09 12:10 ` [PATCH v2 04/12] net/ixgbe: " Ferruh Yigit
2018-01-09 12:10 ` [PATCH v2 05/12] net/e1000: " Ferruh Yigit
2018-01-09 12:10 ` [PATCH v2 06/12] net/virtio: " Ferruh Yigit
2018-01-09 12:10 ` [PATCH v2 07/12] net/nfp: fix build when debug enabled Ferruh Yigit
2018-01-10 12:09 ` Ferruh Yigit
2018-01-09 12:10 ` [PATCH v2 08/12] net/nfp: implement dynamic logging Ferruh Yigit
2018-01-09 12:10 ` [PATCH v2 09/12] net/fm10k: " Ferruh Yigit
2018-01-09 12:10 ` [PATCH v2 10/12] net/ena: " Ferruh Yigit
2018-01-09 12:10 ` [PATCH v2 11/12] net/qede: " Ferruh Yigit
2018-01-09 12:10 ` [PATCH v2 12/12] net/liquidio: " Ferruh Yigit
2018-01-09 12:23 ` [PATCH v2 01/12] net/avp: " Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171219063840.18981-5-stephen@networkplumber.org \
--to=stephen@networkplumber.org \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.