From: Tomasz Pala <gotar@polanet.pl>
To: Linux fs Btrfs <linux-btrfs@vger.kernel.org>
Subject: Re: Unexpected raid1 behaviour
Date: Wed, 20 Dec 2017 09:51:27 +0100 [thread overview]
Message-ID: <20171220085127.GA25056@polanet.pl> (raw)
In-Reply-To: <20171220083448.GA25687@polanet.pl>
Errata:
On Wed, Dec 20, 2017 at 09:34:48 +0100, Tomasz Pala wrote:
> /dev/sda -> 'not ready'
> /dev/sdb -> 'not ready'
> /dev/sdc -> 'ready', triggers /dev/sda -> 'not ready' and /dev/sdb - still 'not ready'
> /dev/sdc -> kernel says 'ready', triggers /dev/sda - 'ready' and /dev/sdb -> 'ready'
The last line should start with /dev/sdd.
> After such timeout, I'd like to tell the kernel: "no more devices, give
> me all the remaining btrfs volumes in degraded mode if possible". By
Actually "if possible" means both:
- if technically possible (i.e. required data is available, like half of RAID1),
- AND if allowed for specific volume as there might be different policies.
For example - one might allow rootfs to be started in degraded-rw mode in
order for the system to boot up, /home in degraded read-only for the
users to have access to their files and do not mount /srv degraded at all.
The failed mount can be non-critical with 'nofail' fstab flag.
> "give me btrfs vulumes" I mean "mark them as 'ready'" so the udev could
> fire it's rules. And if there would be anything for udev to distinguish
> 'ready' from 'ready-degraded' one could easily compose some notification
> scripting on top of it, including sending e-mail to sysadmin.
--
Tomasz Pala <gotar@pld-linux.org>
next prev parent reply other threads:[~2017-12-20 8:51 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-16 19:50 Unexpected raid1 behaviour Dark Penguin
2017-12-17 11:58 ` Duncan
2017-12-17 15:48 ` Peter Grandi
2017-12-17 20:42 ` Chris Murphy
2017-12-18 8:49 ` Anand Jain
2017-12-18 8:49 ` Anand Jain
2017-12-18 10:36 ` Peter Grandi
2017-12-18 12:10 ` Nikolay Borisov
2017-12-18 13:43 ` Anand Jain
2017-12-18 22:28 ` Chris Murphy
2017-12-18 22:29 ` Chris Murphy
2017-12-19 12:30 ` Adam Borowski
2017-12-19 12:54 ` Andrei Borzenkov
2017-12-19 12:59 ` Peter Grandi
2017-12-18 13:06 ` Austin S. Hemmelgarn
2017-12-18 19:43 ` Tomasz Pala
2017-12-18 22:01 ` Peter Grandi
2017-12-19 12:46 ` Austin S. Hemmelgarn
2017-12-19 12:25 ` Austin S. Hemmelgarn
2017-12-19 14:46 ` Tomasz Pala
2017-12-19 16:35 ` Austin S. Hemmelgarn
2017-12-19 17:56 ` Tomasz Pala
2017-12-19 19:47 ` Chris Murphy
2017-12-19 21:17 ` Tomasz Pala
2017-12-20 0:08 ` Chris Murphy
2017-12-23 4:08 ` Tomasz Pala
2017-12-23 5:23 ` Duncan
2017-12-20 16:53 ` Andrei Borzenkov
2017-12-20 16:57 ` Austin S. Hemmelgarn
2017-12-20 20:02 ` Chris Murphy
2017-12-20 20:07 ` Chris Murphy
2017-12-20 20:14 ` Austin S. Hemmelgarn
2017-12-21 1:34 ` Chris Murphy
2017-12-21 11:49 ` Andrei Borzenkov
2017-12-19 20:11 ` Austin S. Hemmelgarn
2017-12-19 21:58 ` Tomasz Pala
2017-12-20 13:10 ` Austin S. Hemmelgarn
2017-12-19 23:53 ` Chris Murphy
2017-12-20 13:12 ` Austin S. Hemmelgarn
2017-12-19 18:31 ` George Mitchell
2017-12-19 20:28 ` Tomasz Pala
2017-12-19 19:35 ` Chris Murphy
2017-12-19 20:41 ` Tomasz Pala
2017-12-19 20:47 ` Austin S. Hemmelgarn
2017-12-19 22:23 ` Tomasz Pala
2017-12-20 13:33 ` Austin S. Hemmelgarn
2017-12-20 17:28 ` Duncan
2017-12-21 11:44 ` Andrei Borzenkov
2017-12-21 12:27 ` Austin S. Hemmelgarn
2017-12-22 16:05 ` Tomasz Pala
2017-12-22 21:04 ` Chris Murphy
2017-12-23 2:52 ` Tomasz Pala
2017-12-23 5:40 ` Duncan
2017-12-19 23:59 ` Chris Murphy
2017-12-20 8:34 ` Tomasz Pala
2017-12-20 8:51 ` Tomasz Pala [this message]
2017-12-20 19:49 ` Chris Murphy
2017-12-18 5:11 ` Anand Jain
2017-12-18 1:20 ` Qu Wenruo
2017-12-18 13:31 ` Austin S. Hemmelgarn
2018-01-12 12:26 ` Dark Penguin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171220085127.GA25056@polanet.pl \
--to=gotar@polanet.pl \
--cc=linux-btrfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.