From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: dri-devel@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org
Subject: [PATCH 3/3] drm/i915: Disable all planes for load detection, v2.
Date: Wed, 20 Dec 2017 10:35:45 +0100 [thread overview]
Message-ID: <20171220093545.613-4-maarten.lankhorst@linux.intel.com> (raw)
In-Reply-To: <20171220093545.613-1-maarten.lankhorst@linux.intel.com>
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
We don't need any active planes during load detection, so just disable
them all. This saves us from having to come up with a suitable
framebuffer. And we also avoid leaving sprite/cursor planes on and
potentially presenting them at a peculiar location during the load
detection.
Changes since v1 (Maarten):
- Add missing call to add_all_affected_planes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102707
---
drivers/gpu/drm/i915/intel_display.c | 147 +++++------------------------------
1 file changed, 18 insertions(+), 129 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 7e833268c9df..ef61f9a75c93 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -9689,111 +9689,27 @@ intel_framebuffer_create(struct drm_i915_gem_object *obj,
return ERR_PTR(ret);
}
-static u32
-intel_framebuffer_pitch_for_width(int width, int bpp)
-{
- u32 pitch = DIV_ROUND_UP(width * bpp, 8);
- return ALIGN(pitch, 64);
-}
-
-static u32
-intel_framebuffer_size_for_mode(const struct drm_display_mode *mode, int bpp)
-{
- u32 pitch = intel_framebuffer_pitch_for_width(mode->hdisplay, bpp);
- return PAGE_ALIGN(pitch * mode->vdisplay);
-}
-
-static struct drm_framebuffer *
-intel_framebuffer_create_for_mode(struct drm_device *dev,
- const struct drm_display_mode *mode,
- int depth, int bpp)
-{
- struct drm_framebuffer *fb;
- struct drm_i915_gem_object *obj;
- struct drm_mode_fb_cmd2 mode_cmd = { 0 };
-
- obj = i915_gem_object_create(to_i915(dev),
- intel_framebuffer_size_for_mode(mode, bpp));
- if (IS_ERR(obj))
- return ERR_CAST(obj);
-
- mode_cmd.width = mode->hdisplay;
- mode_cmd.height = mode->vdisplay;
- mode_cmd.pitches[0] = intel_framebuffer_pitch_for_width(mode_cmd.width,
- bpp);
- mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth);
-
- fb = intel_framebuffer_create(obj, &mode_cmd);
- if (IS_ERR(fb))
- i915_gem_object_put(obj);
-
- return fb;
-}
-
-static struct drm_framebuffer *
-mode_fits_in_fbdev(struct drm_device *dev,
- const struct drm_display_mode *mode)
-{
-#ifdef CONFIG_DRM_FBDEV_EMULATION
- struct drm_i915_private *dev_priv = to_i915(dev);
- struct drm_i915_gem_object *obj;
- struct drm_framebuffer *fb;
-
- if (!dev_priv->fbdev)
- return NULL;
-
- if (!dev_priv->fbdev->fb)
- return NULL;
-
- obj = dev_priv->fbdev->fb->obj;
- BUG_ON(!obj);
-
- fb = &dev_priv->fbdev->fb->base;
- if (fb->pitches[0] < intel_framebuffer_pitch_for_width(mode->hdisplay,
- fb->format->cpp[0] * 8))
- return NULL;
-
- if (obj->base.size < mode->vdisplay * fb->pitches[0])
- return NULL;
-
- drm_framebuffer_get(fb);
- return fb;
-#else
- return NULL;
-#endif
-}
-
-static int intel_modeset_setup_plane_state(struct drm_atomic_state *state,
- struct drm_crtc *crtc,
- const struct drm_display_mode *mode,
- struct drm_framebuffer *fb,
- int x, int y)
+static int intel_modeset_disable_planes(struct drm_atomic_state *state,
+ struct drm_crtc *crtc)
{
+ struct drm_plane *plane;
struct drm_plane_state *plane_state;
- int hdisplay, vdisplay;
- int ret;
-
- plane_state = drm_atomic_get_plane_state(state, crtc->primary);
- if (IS_ERR(plane_state))
- return PTR_ERR(plane_state);
-
- if (mode)
- drm_mode_get_hv_timing(mode, &hdisplay, &vdisplay);
- else
- hdisplay = vdisplay = 0;
+ int ret, i;
- ret = drm_atomic_set_crtc_for_plane(plane_state, fb ? crtc : NULL);
+ ret = drm_atomic_add_affected_planes(state, crtc);
if (ret)
return ret;
- drm_atomic_set_fb_for_plane(plane_state, fb);
- plane_state->crtc_x = 0;
- plane_state->crtc_y = 0;
- plane_state->crtc_w = hdisplay;
- plane_state->crtc_h = vdisplay;
- plane_state->src_x = x << 16;
- plane_state->src_y = y << 16;
- plane_state->src_w = hdisplay << 16;
- plane_state->src_h = vdisplay << 16;
+
+ for_each_new_plane_in_state(state, plane, plane_state, i) {
+ if (plane_state->crtc != crtc)
+ continue;
+
+ ret = drm_atomic_set_crtc_for_plane(plane_state, NULL);
+ if (ret)
+ return ret;
+
+ drm_atomic_set_fb_for_plane(plane_state, NULL);
+ }
return 0;
}
@@ -9811,7 +9727,6 @@ int intel_get_load_detect_pipe(struct drm_connector *connector,
struct drm_crtc *crtc = NULL;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = to_i915(dev);
- struct drm_framebuffer *fb;
struct drm_mode_config *config = &dev->mode_config;
struct drm_atomic_state *state = NULL, *restore_state = NULL;
struct drm_connector_state *connector_state;
@@ -9879,10 +9794,6 @@ int intel_get_load_detect_pipe(struct drm_connector *connector,
found:
intel_crtc = to_intel_crtc(crtc);
- ret = drm_modeset_lock(&crtc->primary->mutex, ctx);
- if (ret)
- goto fail;
-
state = drm_atomic_state_alloc(dev);
restore_state = drm_atomic_state_alloc(dev);
if (!state || !restore_state) {
@@ -9914,39 +9825,17 @@ int intel_get_load_detect_pipe(struct drm_connector *connector,
if (!mode)
mode = &load_detect_mode;
- /* We need a framebuffer large enough to accommodate all accesses
- * that the plane may generate whilst we perform load detection.
- * We can not rely on the fbcon either being present (we get called
- * during its initialisation to detect all boot displays, or it may
- * not even exist) or that it is large enough to satisfy the
- * requested mode.
- */
- fb = mode_fits_in_fbdev(dev, mode);
- if (fb == NULL) {
- DRM_DEBUG_KMS("creating tmp fb for load-detection\n");
- fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32);
- } else
- DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n");
- if (IS_ERR(fb)) {
- DRM_DEBUG_KMS("failed to allocate framebuffer for load-detection\n");
- ret = PTR_ERR(fb);
- goto fail;
- }
-
- ret = intel_modeset_setup_plane_state(state, crtc, mode, fb, 0, 0);
- drm_framebuffer_put(fb);
+ ret = drm_atomic_set_mode_for_crtc(&crtc_state->base, mode);
if (ret)
goto fail;
- ret = drm_atomic_set_mode_for_crtc(&crtc_state->base, mode);
+ ret = intel_modeset_disable_planes(state, crtc);
if (ret)
goto fail;
ret = PTR_ERR_OR_ZERO(drm_atomic_get_connector_state(restore_state, connector));
if (!ret)
ret = PTR_ERR_OR_ZERO(drm_atomic_get_crtc_state(restore_state, crtc));
- if (!ret)
- ret = PTR_ERR_OR_ZERO(drm_atomic_get_plane_state(restore_state, crtc->primary));
if (ret) {
DRM_DEBUG_KMS("Failed to create a copy of old state to restore: %i\n", ret);
goto fail;
--
2.15.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2017-12-20 9:35 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-20 9:35 [PATCH 0/3] drm: Plug framebuffer leaks Maarten Lankhorst
2017-12-20 9:35 ` [PATCH 1/3] drm/plane: Make framebuffer refcounting the responsibility of setplane_internal callers Maarten Lankhorst
2017-12-20 10:23 ` Daniel Vetter
2017-12-20 9:35 ` [PATCH 2/3] drm/framebuffer: Print task that allocated the fb in debug info Maarten Lankhorst
2017-12-20 10:26 ` Daniel Vetter
2017-12-20 9:35 ` Maarten Lankhorst [this message]
2017-12-20 10:28 ` [PATCH 3/3] drm/i915: Disable all planes for load detection, v2 Daniel Vetter
2017-12-21 9:58 ` Maarten Lankhorst
2017-12-20 10:15 ` ✓ Fi.CI.BAT: success for drm: Plug framebuffer leaks Patchwork
2017-12-20 11:30 ` ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171220093545.613-4-maarten.lankhorst@linux.intel.com \
--to=maarten.lankhorst@linux.intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.