From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 12/14] qcow2: get rid of qcow2_backing_read1 routine
Date: Wed, 20 Dec 2017 14:19:37 +0100 [thread overview]
Message-ID: <20171220131939.27543-13-kwolf@redhat.com> (raw)
In-Reply-To: <20171220131939.27543-1-kwolf@redhat.com>
From: Edgar Kaziakhmedov <edgar.kaziakhmedov@virtuozzo.com>
Since bdrv_co_preadv does all neccessary checks including
reading after the end of the backing file, avoid duplication
of verification before bdrv_co_preadv call.
Signed-off-by: Edgar Kaziakhmedov <edgar.kaziakhmedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/qcow2.h | 3 ---
block/qcow2.c | 51 ++++++++-------------------------------------------
2 files changed, 8 insertions(+), 46 deletions(-)
diff --git a/block/qcow2.h b/block/qcow2.h
index 6f0ff15dd0..46c8cf44ec 100644
--- a/block/qcow2.h
+++ b/block/qcow2.h
@@ -528,9 +528,6 @@ uint32_t offset_to_reftable_index(BDRVQcow2State *s, uint64_t offset)
}
/* qcow2.c functions */
-int qcow2_backing_read1(BlockDriverState *bs, QEMUIOVector *qiov,
- int64_t sector_num, int nb_sectors);
-
int64_t qcow2_refcount_metadata_size(int64_t clusters, size_t cluster_size,
int refcount_order, bool generous_increase,
uint64_t *refblock_count);
diff --git a/block/qcow2.c b/block/qcow2.c
index 1914a940e5..4348b2c0c5 100644
--- a/block/qcow2.c
+++ b/block/qcow2.c
@@ -1672,34 +1672,12 @@ static int64_t coroutine_fn qcow2_co_get_block_status(BlockDriverState *bs,
return status;
}
-/* handle reading after the end of the backing file */
-int qcow2_backing_read1(BlockDriverState *bs, QEMUIOVector *qiov,
- int64_t offset, int bytes)
-{
- uint64_t bs_size = bs->total_sectors * BDRV_SECTOR_SIZE;
- int n1;
-
- if ((offset + bytes) <= bs_size) {
- return bytes;
- }
-
- if (offset >= bs_size) {
- n1 = 0;
- } else {
- n1 = bs_size - offset;
- }
-
- qemu_iovec_memset(qiov, n1, 0, bytes - n1);
-
- return n1;
-}
-
static coroutine_fn int qcow2_co_preadv(BlockDriverState *bs, uint64_t offset,
uint64_t bytes, QEMUIOVector *qiov,
int flags)
{
BDRVQcow2State *s = bs->opaque;
- int offset_in_cluster, n1;
+ int offset_in_cluster;
int ret;
unsigned int cur_bytes; /* number of bytes in current iteration */
uint64_t cluster_offset = 0;
@@ -1734,26 +1712,13 @@ static coroutine_fn int qcow2_co_preadv(BlockDriverState *bs, uint64_t offset,
case QCOW2_CLUSTER_UNALLOCATED:
if (bs->backing) {
- /* read from the base image */
- n1 = qcow2_backing_read1(bs->backing->bs, &hd_qiov,
- offset, cur_bytes);
- if (n1 > 0) {
- QEMUIOVector local_qiov;
-
- qemu_iovec_init(&local_qiov, hd_qiov.niov);
- qemu_iovec_concat(&local_qiov, &hd_qiov, 0, n1);
-
- BLKDBG_EVENT(bs->file, BLKDBG_READ_BACKING_AIO);
- qemu_co_mutex_unlock(&s->lock);
- ret = bdrv_co_preadv(bs->backing, offset, n1,
- &local_qiov, 0);
- qemu_co_mutex_lock(&s->lock);
-
- qemu_iovec_destroy(&local_qiov);
-
- if (ret < 0) {
- goto fail;
- }
+ BLKDBG_EVENT(bs->file, BLKDBG_READ_BACKING_AIO);
+ qemu_co_mutex_unlock(&s->lock);
+ ret = bdrv_co_preadv(bs->backing, offset, cur_bytes,
+ &hd_qiov, 0);
+ qemu_co_mutex_lock(&s->lock);
+ if (ret < 0) {
+ goto fail;
}
} else {
/* Note: in this case, no need to wait */
--
2.13.6
next prev parent reply other threads:[~2017-12-20 13:20 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-20 13:19 [Qemu-devel] [PULL 00/14] Block layer patches Kevin Wolf
2017-12-20 13:19 ` [Qemu-devel] [PULL 01/14] hw/block/nvme: Convert to realize Kevin Wolf
2017-12-20 13:19 ` [Qemu-devel] [PULL 02/14] block: Formats don't need CONSISTENT_READ with NO_IO Kevin Wolf
2017-12-20 13:19 ` [Qemu-devel] [PULL 03/14] iotests: fix 197 for vpc Kevin Wolf
2017-12-20 13:19 ` [Qemu-devel] [PULL 04/14] block: Make bdrv_drain_invoke() recursive Kevin Wolf
2017-12-20 13:19 ` [Qemu-devel] [PULL 05/14] block: Call .drain_begin only once in bdrv_drain_all_begin() Kevin Wolf
2017-12-20 13:19 ` [Qemu-devel] [PULL 06/14] test-bdrv-drain: Test BlockDriver callbacks for drain Kevin Wolf
2017-12-20 13:19 ` [Qemu-devel] [PULL 07/14] block: bdrv_drain_recurse(): Remove unused begin parameter Kevin Wolf
2017-12-20 13:19 ` [Qemu-devel] [PULL 08/14] block: Don't wait for requests in bdrv_drain*_end() Kevin Wolf
2017-12-20 13:19 ` [Qemu-devel] [PULL 09/14] block: Unify order in drain functions Kevin Wolf
2017-12-20 13:19 ` [Qemu-devel] [PULL 10/14] qemu-img: Document --force-share / -U Kevin Wolf
2017-12-20 13:19 ` [Qemu-devel] [PULL 11/14] block: Don't acquire AioContext in hmp_qemu_io() Kevin Wolf
2017-12-20 13:19 ` Kevin Wolf [this message]
2017-12-20 13:19 ` [Qemu-devel] [PULL 13/14] block: Document that x-blockdev-change breaks quorum children list Kevin Wolf
2017-12-20 13:19 ` [Qemu-devel] [PULL 14/14] nvme: Add tracing Kevin Wolf
2017-12-20 15:30 ` [Qemu-devel] [PULL 00/14] Block layer patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171220131939.27543-13-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.