From: Daniel Scheller <d.scheller.oss@gmail.com>
To: linux-media@vger.kernel.org, mchehab@kernel.org,
mchehab@s-opensource.com
Cc: Ralph Metzler <rjkm@metzlerbros.de>
Subject: [PATCH 4/4] [media] dvb-frontends/stv0910: cleanup init_search_param() and enable PLS
Date: Wed, 27 Dec 2017 00:37:59 +0100 [thread overview]
Message-ID: <20171226233759.16116-5-d.scheller.oss@gmail.com> (raw)
In-Reply-To: <20171226233759.16116-1-d.scheller.oss@gmail.com>
From: Daniel Scheller <d.scheller@gmx.net>
Cleanup the mess in init_search_param() by utilising the new register
access macros and functions. And while at it, move the ISI and PLS setup
into separate functions, and pass the new scrambling_sequence_index (aka.
physical layer scrambling) value to set_pls.
Picked up from the dddvb upstream, adapted to the different naming of the
pls property (pls vs. scrambling_sequence_index).
Cc: Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
---
drivers/media/dvb-frontends/stv0910.c | 113 ++++++++++++++++------------------
1 file changed, 52 insertions(+), 61 deletions(-)
diff --git a/drivers/media/dvb-frontends/stv0910.c b/drivers/media/dvb-frontends/stv0910.c
index 5fed22685e28..b0c14ff74b67 100644
--- a/drivers/media/dvb-frontends/stv0910.c
+++ b/drivers/media/dvb-frontends/stv0910.c
@@ -194,7 +194,7 @@ static int write_shared_reg(struct stv *state, u16 reg, u8 mask, u8 val)
return status;
}
-static int __maybe_unused write_field(struct stv *state, u32 field, u8 val)
+static int write_field(struct stv *state, u32 field, u8 val)
{
int status;
u8 shift, mask, old, new;
@@ -880,45 +880,60 @@ static int stop(struct stv *state)
return 0;
}
-static int init_search_param(struct stv *state)
+static void set_pls(struct stv *state, u32 pls_code)
{
- u8 tmp;
-
- read_reg(state, RSTV0910_P2_PDELCTRL1 + state->regoff, &tmp);
- tmp |= 0x20; /* Filter_en (no effect if SIS=non-MIS */
- write_reg(state, RSTV0910_P2_PDELCTRL1 + state->regoff, tmp);
-
- read_reg(state, RSTV0910_P2_PDELCTRL2 + state->regoff, &tmp);
- tmp &= ~0x02; /* frame mode = 0 */
- write_reg(state, RSTV0910_P2_PDELCTRL2 + state->regoff, tmp);
-
- write_reg(state, RSTV0910_P2_UPLCCST0 + state->regoff, 0xe0);
- write_reg(state, RSTV0910_P2_ISIBITENA + state->regoff, 0x00);
-
- read_reg(state, RSTV0910_P2_TSSTATEM + state->regoff, &tmp);
- tmp &= ~0x01; /* nosync = 0, in case next signal is standard TS */
- write_reg(state, RSTV0910_P2_TSSTATEM + state->regoff, tmp);
-
- read_reg(state, RSTV0910_P2_TSCFGL + state->regoff, &tmp);
- tmp &= ~0x04; /* embindvb = 0 */
- write_reg(state, RSTV0910_P2_TSCFGL + state->regoff, tmp);
-
- read_reg(state, RSTV0910_P2_TSINSDELH + state->regoff, &tmp);
- tmp &= ~0x80; /* syncbyte = 0 */
- write_reg(state, RSTV0910_P2_TSINSDELH + state->regoff, tmp);
-
- read_reg(state, RSTV0910_P2_TSINSDELM + state->regoff, &tmp);
- tmp &= ~0x08; /* token = 0 */
- write_reg(state, RSTV0910_P2_TSINSDELM + state->regoff, tmp);
+ if (pls_code == state->cur_scrambling_code)
+ return;
+
+ /* PLROOT2 bit 2 = gold code */
+ write_reg(state, RSTV0910_P2_PLROOT0 + state->regoff,
+ pls_code & 0xff);
+ write_reg(state, RSTV0910_P2_PLROOT1 + state->regoff,
+ (pls_code >> 8) & 0xff);
+ write_reg(state, RSTV0910_P2_PLROOT2 + state->regoff,
+ 0x04 | ((pls_code >> 16) & 0x03));
+ state->cur_scrambling_code = pls_code;
+}
- read_reg(state, RSTV0910_P2_TSDLYSET2 + state->regoff, &tmp);
- tmp &= ~0x30; /* hysteresis threshold = 0 */
- write_reg(state, RSTV0910_P2_TSDLYSET2 + state->regoff, tmp);
+static void set_isi(struct stv *state, u32 isi)
+{
+ if (isi == NO_STREAM_ID_FILTER)
+ return;
+ if (isi == 0x80000000) {
+ SET_FIELD(FORCE_CONTINUOUS, 1);
+ SET_FIELD(TSOUT_NOSYNC, 1);
+ } else {
+ SET_FIELD(FILTER_EN, 1);
+ write_reg(state, RSTV0910_P2_ISIENTRY + state->regoff,
+ isi & 0xff);
+ write_reg(state, RSTV0910_P2_ISIBITENA + state->regoff, 0xff);
+ }
+ SET_FIELD(ALGOSWRST, 1);
+ SET_FIELD(ALGOSWRST, 0);
+}
- read_reg(state, RSTV0910_P2_PDELCTRL0 + state->regoff, &tmp);
- tmp = (tmp & ~0x30) | 0x10; /* isi obs mode = 1, observe min ISI */
- write_reg(state, RSTV0910_P2_PDELCTRL0 + state->regoff, tmp);
+static void set_stream_modes(struct stv *state,
+ struct dtv_frontend_properties *p)
+{
+ set_isi(state, p->stream_id);
+ set_pls(state, p->scrambling_sequence_index);
+}
+static int init_search_param(struct stv *state,
+ struct dtv_frontend_properties *p)
+{
+ SET_FIELD(FORCE_CONTINUOUS, 0);
+ SET_FIELD(FRAME_MODE, 0);
+ SET_FIELD(FILTER_EN, 0);
+ SET_FIELD(TSOUT_NOSYNC, 0);
+ SET_FIELD(TSFIFO_EMBINDVB, 0);
+ SET_FIELD(TSDEL_SYNCBYTE, 0);
+ SET_REG(UPLCCST0, 0xe0);
+ SET_FIELD(TSINS_TOKEN, 0);
+ SET_FIELD(HYSTERESIS_THRESHOLD, 0);
+ SET_FIELD(ISIOBS_MODE, 1);
+
+ set_stream_modes(state, p);
return 0;
}
@@ -1005,7 +1020,6 @@ static int start(struct stv *state, struct dtv_frontend_properties *p)
s32 freq;
u8 reg_dmdcfgmd;
u16 symb;
- u32 scrambling_code = 1;
if (p->symbol_rate < 100000 || p->symbol_rate > 70000000)
return -EINVAL;
@@ -1017,30 +1031,7 @@ static int start(struct stv *state, struct dtv_frontend_properties *p)
if (state->started)
write_reg(state, RSTV0910_P2_DMDISTATE + state->regoff, 0x5C);
- init_search_param(state);
-
- if (p->stream_id != NO_STREAM_ID_FILTER) {
- /*
- * Backwards compatibility to "crazy" API.
- * PRBS X root cannot be 0, so this should always work.
- */
- if (p->stream_id & 0xffffff00)
- scrambling_code = p->stream_id >> 8;
- write_reg(state, RSTV0910_P2_ISIENTRY + state->regoff,
- p->stream_id & 0xff);
- write_reg(state, RSTV0910_P2_ISIBITENA + state->regoff,
- 0xff);
- }
-
- if (scrambling_code != state->cur_scrambling_code) {
- write_reg(state, RSTV0910_P2_PLROOT0 + state->regoff,
- scrambling_code & 0xff);
- write_reg(state, RSTV0910_P2_PLROOT1 + state->regoff,
- (scrambling_code >> 8) & 0xff);
- write_reg(state, RSTV0910_P2_PLROOT2 + state->regoff,
- (scrambling_code >> 16) & 0x0f);
- state->cur_scrambling_code = scrambling_code;
- }
+ init_search_param(state, p);
if (p->symbol_rate <= 1000000) { /* SR <=1Msps */
state->demod_timeout = 3000;
--
2.13.6
prev parent reply other threads:[~2017-12-26 23:38 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-26 23:37 [PATCH 0/4] stv0910: upstream changes and PLS support Daniel Scheller
2017-12-26 23:37 ` [PATCH 1/4] [media] dvb-frontends/stv0910: deduplicate writes in enable_puncture_rate() Daniel Scheller
2017-12-26 23:37 ` [PATCH 2/4] [media] dvb-frontends/stv0910: cleanup I2C access functions Daniel Scheller
2017-12-26 23:37 ` [PATCH 3/4] [media] dvb-frontends/stv0910: field and register access helpers Daniel Scheller
2017-12-26 23:37 ` Daniel Scheller [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171226233759.16116-5-d.scheller.oss@gmail.com \
--to=d.scheller.oss@gmail.com \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=mchehab@s-opensource.com \
--cc=rjkm@metzlerbros.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.