From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Kevin Cernekee <cernekee@chromium.org>,
Andrew Lunn <andrew@lunn.ch>,
"David S. Miller" <davem@davemloft.net>
Subject: [PATCH 3.18 20/32] net: igmp: Use correct source address on IGMPv3 reports
Date: Mon, 1 Jan 2018 15:22:27 +0100 [thread overview]
Message-ID: <20180101140016.955510390@linuxfoundation.org> (raw)
In-Reply-To: <20180101140012.582300879@linuxfoundation.org>
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kevin Cernekee <cernekee@chromium.org>
[ Upstream commit a46182b00290839fa3fa159d54fd3237bd8669f0 ]
Closing a multicast socket after the final IPv4 address is deleted
from an interface can generate a membership report that uses the
source IP from a different interface. The following test script, run
from an isolated netns, reproduces the issue:
#!/bin/bash
ip link add dummy0 type dummy
ip link add dummy1 type dummy
ip link set dummy0 up
ip link set dummy1 up
ip addr add 10.1.1.1/24 dev dummy0
ip addr add 192.168.99.99/24 dev dummy1
tcpdump -U -i dummy0 &
socat EXEC:"sleep 2" \
UDP4-DATAGRAM:239.101.1.68:8889,ip-add-membership=239.0.1.68:10.1.1.1 &
sleep 1
ip addr del 10.1.1.1/24 dev dummy0
sleep 5
kill %tcpdump
RFC 3376 specifies that the report must be sent with a valid IP source
address from the destination subnet, or from address 0.0.0.0. Add an
extra check to make sure this is the case.
Signed-off-by: Kevin Cernekee <cernekee@chromium.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv4/igmp.c | 20 +++++++++++++++++++-
1 file changed, 19 insertions(+), 1 deletion(-)
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -89,6 +89,7 @@
#include <linux/rtnetlink.h>
#include <linux/times.h>
#include <linux/pkt_sched.h>
+#include <linux/byteorder/generic.h>
#include <net/net_namespace.h>
#include <net/arp.h>
@@ -318,6 +319,23 @@ igmp_scount(struct ip_mc_list *pmc, int
return scount;
}
+/* source address selection per RFC 3376 section 4.2.13 */
+static __be32 igmpv3_get_srcaddr(struct net_device *dev,
+ const struct flowi4 *fl4)
+{
+ struct in_device *in_dev = __in_dev_get_rcu(dev);
+
+ if (!in_dev)
+ return htonl(INADDR_ANY);
+
+ for_ifa(in_dev) {
+ if (inet_ifa_match(fl4->saddr, ifa))
+ return fl4->saddr;
+ } endfor_ifa(in_dev);
+
+ return htonl(INADDR_ANY);
+}
+
static struct sk_buff *igmpv3_newpack(struct net_device *dev, unsigned int mtu)
{
struct sk_buff *skb;
@@ -366,7 +384,7 @@ static struct sk_buff *igmpv3_newpack(st
pip->frag_off = htons(IP_DF);
pip->ttl = 1;
pip->daddr = fl4.daddr;
- pip->saddr = fl4.saddr;
+ pip->saddr = igmpv3_get_srcaddr(dev, &fl4);
pip->protocol = IPPROTO_IGMP;
pip->tot_len = 0; /* filled in later */
ip_select_ident(skb, NULL);
next prev parent reply other threads:[~2018-01-01 14:23 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-01 14:22 [PATCH 3.18 00/32] 3.18.91-stable review Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 01/32] ACPI: APEI / ERST: Fix missing error handling in erst_reader() Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 02/32] crypto: mcryptd - protect the per-CPU queue with a lock Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 03/32] mfd: twl4030-audio: Fix sibling-node lookup Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 04/32] mfd: twl6040: Fix child-node lookup Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 05/32] ALSA: rawmidi: Avoid racy info ioctl via ctl device Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 06/32] ALSA: usb-audio: Fix the missing ctl name suffix at parsing SU Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 07/32] PCI / PM: Force devices to D0 in pci_pm_thaw_noirq() Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 08/32] parisc: Hide Diva-built-in serial aux and graphics card Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 09/32] KVM: X86: Fix load RFLAGS w/o the fixed bit Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 10/32] powerpc/perf: Dereference BHRB entries safely Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 11/32] net: mvneta: clear interface link status on port disable Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 12/32] tracing: Remove extra zeroing out of the ring buffer page Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 13/32] tracing: Fix possible double free on failure of allocating trace buffer Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 14/32] tracing: Fix crash when it fails to alloc ring buffer Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 15/32] ring-buffer: Mask out the info bits when returning buffer page length Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 16/32] ASoC: twl4030: fix child-node lookup Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 17/32] kbuild: add -fno-stack-check to kernel build options Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 18/32] ipv4: igmp: guard against silly MTU values Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 19/32] ipv6: mcast: better catch silly mtu values Greg Kroah-Hartman
2018-01-01 14:22 ` Greg Kroah-Hartman [this message]
2018-01-01 14:22 ` [PATCH 3.18 21/32] netlink: Add netns check on taps Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 22/32] net: qmi_wwan: add Sierra EM7565 1199:9091 Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 23/32] tcp md5sig: Use skbs saddr when replying to an incoming segment Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 24/32] tg3: Fix rx hang on MTU change with 5717/5719 Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 25/32] net: mvmdio: disable/unprepare clocks in EPROBE_DEFER case Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 26/32] sctp: Replace use of sockets_allocated with specified macro Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 27/32] net: ipv4: fix for a race condition in raw_sendmsg Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 28/32] USB: serial: option: add support for Telit ME910 PID 0x1101 Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 29/32] usb: Add device quirk for Logitech HD Pro Webcam C925e Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 30/32] usb: add RESET_RESUME for ELSA MicroLink 56K Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 31/32] usb: xhci: Add XHCI_TRUST_TX_LENGTH for Renesas uPD720201 Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 32/32] n_tty: fix EXTPROC vs ICANON interaction with TIOCINQ (aka FIONREAD) Greg Kroah-Hartman
2018-01-01 18:07 ` [PATCH 3.18 00/32] 3.18.91-stable review kernelci.org bot
2018-01-02 16:46 ` Guenter Roeck
2018-01-02 22:22 ` Shuah Khan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180101140016.955510390@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=andrew@lunn.ch \
--cc=cernekee@chromium.org \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.