From: wens@csie.org (Chen-Yu Tsai)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/8] ARM: dts: sun9i: Add CCI-400 device nodes for A80
Date: Thu, 4 Jan 2018 22:37:48 +0800 [thread overview]
Message-ID: <20180104143754.2425-3-wens@csie.org> (raw)
In-Reply-To: <20180104143754.2425-1-wens@csie.org>
The A80 includes an ARM CCI-400 interconnect to support multi-cluster
CPU caches.
Also add the maximum clock frequency for the CPUs, as listed in the
A80 Optimus Board FEX file.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun9i-a80.dtsi | 46 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 90eac0b2a193..85fb800af8ab 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -63,48 +63,64 @@
cpu0: cpu at 0 {
compatible = "arm,cortex-a7";
device_type = "cpu";
+ cci-control-port = <&cci_control0>;
+ clock-frequency = <12000000>;
reg = <0x0>;
};
cpu1: cpu at 1 {
compatible = "arm,cortex-a7";
device_type = "cpu";
+ cci-control-port = <&cci_control0>;
+ clock-frequency = <12000000>;
reg = <0x1>;
};
cpu2: cpu at 2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
+ cci-control-port = <&cci_control0>;
+ clock-frequency = <12000000>;
reg = <0x2>;
};
cpu3: cpu at 3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
+ cci-control-port = <&cci_control0>;
+ clock-frequency = <12000000>;
reg = <0x3>;
};
cpu4: cpu at 100 {
compatible = "arm,cortex-a15";
device_type = "cpu";
+ cci-control-port = <&cci_control1>;
+ clock-frequency = <18000000>;
reg = <0x100>;
};
cpu5: cpu at 101 {
compatible = "arm,cortex-a15";
device_type = "cpu";
+ cci-control-port = <&cci_control1>;
+ clock-frequency = <18000000>;
reg = <0x101>;
};
cpu6: cpu at 102 {
compatible = "arm,cortex-a15";
device_type = "cpu";
+ cci-control-port = <&cci_control1>;
+ clock-frequency = <18000000>;
reg = <0x102>;
};
cpu7: cpu at 103 {
compatible = "arm,cortex-a15";
device_type = "cpu";
+ cci-control-port = <&cci_control1>;
+ clock-frequency = <18000000>;
reg = <0x103>;
};
};
@@ -431,6 +447,36 @@
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
+ cci: cci at 1c90000 {
+ compatible = "arm,cci-400";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x01c90000 0x1000>;
+ ranges = <0x0 0x01c90000 0x10000>;
+
+ cci_control0: slave-if at 4000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace";
+ reg = <0x4000 0x1000>;
+ };
+
+ cci_control1: slave-if at 5000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace";
+ reg = <0x5000 0x1000>;
+ };
+
+ pmu at 9000 {
+ compatible = "arm,cci-400-pmu,r1";
+ reg = <0x9000 0x5000>;
+ interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
de_clocks: clock at 3000000 {
compatible = "allwinner,sun9i-a80-de-clks";
reg = <0x03000000 0x30>;
--
2.15.1
WARNING: multiple messages have this Message-ID (diff)
From: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
To: Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Russell King <linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: Mylene JOSSERAND
<mylene.josserand-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
Nicolas Pitre
<nicolas.pitre-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Dave Martin <Dave.Martin-5wv7dgnIgG8@public.gmane.org>
Subject: [PATCH v2 2/8] ARM: dts: sun9i: Add CCI-400 device nodes for A80
Date: Thu, 4 Jan 2018 22:37:48 +0800 [thread overview]
Message-ID: <20180104143754.2425-3-wens@csie.org> (raw)
In-Reply-To: <20180104143754.2425-1-wens-jdAy2FN1RRM@public.gmane.org>
The A80 includes an ARM CCI-400 interconnect to support multi-cluster
CPU caches.
Also add the maximum clock frequency for the CPUs, as listed in the
A80 Optimus Board FEX file.
Signed-off-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
---
arch/arm/boot/dts/sun9i-a80.dtsi | 46 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 90eac0b2a193..85fb800af8ab 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -63,48 +63,64 @@
cpu0: cpu@0 {
compatible = "arm,cortex-a7";
device_type = "cpu";
+ cci-control-port = <&cci_control0>;
+ clock-frequency = <12000000>;
reg = <0x0>;
};
cpu1: cpu@1 {
compatible = "arm,cortex-a7";
device_type = "cpu";
+ cci-control-port = <&cci_control0>;
+ clock-frequency = <12000000>;
reg = <0x1>;
};
cpu2: cpu@2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
+ cci-control-port = <&cci_control0>;
+ clock-frequency = <12000000>;
reg = <0x2>;
};
cpu3: cpu@3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
+ cci-control-port = <&cci_control0>;
+ clock-frequency = <12000000>;
reg = <0x3>;
};
cpu4: cpu@100 {
compatible = "arm,cortex-a15";
device_type = "cpu";
+ cci-control-port = <&cci_control1>;
+ clock-frequency = <18000000>;
reg = <0x100>;
};
cpu5: cpu@101 {
compatible = "arm,cortex-a15";
device_type = "cpu";
+ cci-control-port = <&cci_control1>;
+ clock-frequency = <18000000>;
reg = <0x101>;
};
cpu6: cpu@102 {
compatible = "arm,cortex-a15";
device_type = "cpu";
+ cci-control-port = <&cci_control1>;
+ clock-frequency = <18000000>;
reg = <0x102>;
};
cpu7: cpu@103 {
compatible = "arm,cortex-a15";
device_type = "cpu";
+ cci-control-port = <&cci_control1>;
+ clock-frequency = <18000000>;
reg = <0x103>;
};
};
@@ -431,6 +447,36 @@
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
+ cci: cci@1c90000 {
+ compatible = "arm,cci-400";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x01c90000 0x1000>;
+ ranges = <0x0 0x01c90000 0x10000>;
+
+ cci_control0: slave-if@4000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace";
+ reg = <0x4000 0x1000>;
+ };
+
+ cci_control1: slave-if@5000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace";
+ reg = <0x5000 0x1000>;
+ };
+
+ pmu@9000 {
+ compatible = "arm,cci-400-pmu,r1";
+ reg = <0x9000 0x5000>;
+ interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
de_clocks: clock@3000000 {
compatible = "allwinner,sun9i-a80-de-clks";
reg = <0x03000000 0x30>;
--
2.15.1
WARNING: multiple messages have this Message-ID (diff)
From: Chen-Yu Tsai <wens@csie.org>
To: Maxime Ripard <maxime.ripard@free-electrons.com>,
Russell King <linux@armlinux.org.uk>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Cc: Mylene JOSSERAND <mylene.josserand@free-electrons.com>,
Chen-Yu Tsai <wens@csie.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com,
Nicolas Pitre <nicolas.pitre@linaro.org>,
Dave Martin <Dave.Martin@arm.com>
Subject: [PATCH v2 2/8] ARM: dts: sun9i: Add CCI-400 device nodes for A80
Date: Thu, 4 Jan 2018 22:37:48 +0800 [thread overview]
Message-ID: <20180104143754.2425-3-wens@csie.org> (raw)
In-Reply-To: <20180104143754.2425-1-wens@csie.org>
The A80 includes an ARM CCI-400 interconnect to support multi-cluster
CPU caches.
Also add the maximum clock frequency for the CPUs, as listed in the
A80 Optimus Board FEX file.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun9i-a80.dtsi | 46 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 90eac0b2a193..85fb800af8ab 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -63,48 +63,64 @@
cpu0: cpu@0 {
compatible = "arm,cortex-a7";
device_type = "cpu";
+ cci-control-port = <&cci_control0>;
+ clock-frequency = <12000000>;
reg = <0x0>;
};
cpu1: cpu@1 {
compatible = "arm,cortex-a7";
device_type = "cpu";
+ cci-control-port = <&cci_control0>;
+ clock-frequency = <12000000>;
reg = <0x1>;
};
cpu2: cpu@2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
+ cci-control-port = <&cci_control0>;
+ clock-frequency = <12000000>;
reg = <0x2>;
};
cpu3: cpu@3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
+ cci-control-port = <&cci_control0>;
+ clock-frequency = <12000000>;
reg = <0x3>;
};
cpu4: cpu@100 {
compatible = "arm,cortex-a15";
device_type = "cpu";
+ cci-control-port = <&cci_control1>;
+ clock-frequency = <18000000>;
reg = <0x100>;
};
cpu5: cpu@101 {
compatible = "arm,cortex-a15";
device_type = "cpu";
+ cci-control-port = <&cci_control1>;
+ clock-frequency = <18000000>;
reg = <0x101>;
};
cpu6: cpu@102 {
compatible = "arm,cortex-a15";
device_type = "cpu";
+ cci-control-port = <&cci_control1>;
+ clock-frequency = <18000000>;
reg = <0x102>;
};
cpu7: cpu@103 {
compatible = "arm,cortex-a15";
device_type = "cpu";
+ cci-control-port = <&cci_control1>;
+ clock-frequency = <18000000>;
reg = <0x103>;
};
};
@@ -431,6 +447,36 @@
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
+ cci: cci@1c90000 {
+ compatible = "arm,cci-400";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x01c90000 0x1000>;
+ ranges = <0x0 0x01c90000 0x10000>;
+
+ cci_control0: slave-if@4000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace";
+ reg = <0x4000 0x1000>;
+ };
+
+ cci_control1: slave-if@5000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace";
+ reg = <0x5000 0x1000>;
+ };
+
+ pmu@9000 {
+ compatible = "arm,cci-400-pmu,r1";
+ reg = <0x9000 0x5000>;
+ interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
de_clocks: clock@3000000 {
compatible = "allwinner,sun9i-a80-de-clks";
reg = <0x03000000 0x30>;
--
2.15.1
next prev parent reply other threads:[~2018-01-04 14:37 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-04 14:37 [PATCH v2 0/8] ARM: sun9i: SMP support with Multi-Cluster Power Management Chen-Yu Tsai
2018-01-04 14:37 ` Chen-Yu Tsai
2018-01-04 14:37 ` Chen-Yu Tsai
2018-01-04 14:37 ` [PATCH v2 1/8] ARM: sun9i: Support SMP on A80 with Multi-Cluster Power Management (MCPM) Chen-Yu Tsai
2018-01-04 14:37 ` Chen-Yu Tsai
2018-01-04 14:37 ` Chen-Yu Tsai
2018-01-04 14:37 ` Chen-Yu Tsai [this message]
2018-01-04 14:37 ` [PATCH v2 2/8] ARM: dts: sun9i: Add CCI-400 device nodes for A80 Chen-Yu Tsai
2018-01-04 14:37 ` Chen-Yu Tsai
2018-01-04 14:37 ` [PATCH v2 3/8] ARM: dts: sun9i: Add CPUCFG device node for A80 dtsi Chen-Yu Tsai
2018-01-04 14:37 ` Chen-Yu Tsai
2018-01-04 14:37 ` Chen-Yu Tsai
2018-01-04 14:37 ` [PATCH v2 4/8] ARM: dts: sun9i: Add PRCM device node for the " Chen-Yu Tsai
2018-01-04 14:37 ` Chen-Yu Tsai
2018-01-04 14:37 ` Chen-Yu Tsai
2018-01-04 14:37 ` [PATCH v2 5/8] ARM: sun9i: mcpm: Support CPU/cluster power down and hotplugging for cpu1~7 Chen-Yu Tsai
2018-01-04 14:37 ` Chen-Yu Tsai
2018-01-04 14:37 ` Chen-Yu Tsai
2018-01-04 14:37 ` [PATCH v2 6/8] dt-bindings: ARM: sunxi: Document A80 SoC secure SRAM usage by SMP hotplug Chen-Yu Tsai
2018-01-04 14:37 ` Chen-Yu Tsai
2018-01-04 14:37 ` Chen-Yu Tsai
2018-01-09 3:40 ` Rob Herring
2018-01-09 3:40 ` Rob Herring
2018-01-09 3:40 ` Rob Herring
2018-01-04 14:37 ` [PATCH v2 7/8] ARM: sun9i: mcpm: Support cpu0 hotplug Chen-Yu Tsai
2018-01-04 14:37 ` Chen-Yu Tsai
2018-01-04 14:37 ` Chen-Yu Tsai
2018-01-04 14:37 ` [PATCH v2 8/8] ARM: dts: sun9i: Add secure SRAM node used for MCPM SMP hotplug Chen-Yu Tsai
2018-01-04 14:37 ` Chen-Yu Tsai
2018-01-04 14:37 ` Chen-Yu Tsai
2018-01-04 14:58 ` [PATCH v2 0/8] ARM: sun9i: SMP support with Multi-Cluster Power Management Maxime Ripard
2018-01-04 14:58 ` Maxime Ripard
2018-01-04 18:04 ` Lorenzo Pieralisi
2018-01-04 18:04 ` Lorenzo Pieralisi
2018-01-04 18:04 ` Lorenzo Pieralisi
2018-01-04 20:56 ` Nicolas Pitre
2018-01-04 20:56 ` Nicolas Pitre
2018-01-04 20:56 ` Nicolas Pitre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180104143754.2425-3-wens@csie.org \
--to=wens@csie.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.