From: William Dauchy <wdauchy@gmail.com>
To: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: linux-wireless@vger.kernel.org
Subject: Re: brcmfmac: set p2p_disc error on BCM4350
Date: Mon, 8 Jan 2018 11:30:12 +0100 [thread overview]
Message-ID: <20180108103012.GA1957@paf> (raw)
In-Reply-To: <5A533A88.1000804@broadcom.com>
Hello Arend,
Thanks for your quick answer.
On Mon, Jan 08, 2018 at 10:31:52AM +0100, Arend van Spriel wrote:
> This has been reported before, but not been able to look into it. Diving
> into firmware it seems that error can only occur if the mac address for the
> p2pdev interface is already used. So if possible can you rebuild the driver
> with the patch below applied and provide dmesg output and output of
> 'ifconfig -a'.
>
> Regards,
> Arend
> ---8<----------------------------------------------------------------
>
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
> b/drivers/n
> index 2ee5413..f96ad37 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
> @@ -2065,6 +2065,7 @@ static struct wireless_dev
> *brcmf_p2p_create_p2pdev(struc
> int err;
> u32 bsscfgidx;
>
> + brcmf_err("enter: mac=%pM\n", addr);
> if (p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif)
> return ERR_PTR(-ENOSPC);
>
>
Here is my brcmfmac dmesg output with patch applied
(please tell me if you need complete dmesg)
brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac4350-pcie.bin for chip 0x004350(17232) rev 0x000008
brcmfmac 0000:3a:00.0: Direct firmware load for brcm/brcmfmac4350-pcie.txt failed with error -2
brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 22 2015 06:16:26 version 7.35.180.119 (r594535) FWID 01-e791c176
brcmfmac 0000:3a:00.0 wlp58s0: renamed from wlan0
brcmfmac: brcmf_p2p_create_p2pdev: enter: mac=00:00:00:00:00:00
brcmfmac: brcmf_p2p_create_p2pdev: set p2p_disc error
brcmfmac: brcmf_cfg80211_add_iface: add iface p2p-dev-wlp58s0 type 10 failed: err=-16
ifconfig shows:
wlp58s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.18.77 netmask 255.255.255.0 broadcast 192.168.18.255
inet6 fe80::3517:e1be:5bc7:899 prefixlen 64 scopeid 0x20<link>
ether 30:52:cb:83:71:33 txqueuelen 1000 (Ethernet)
RX packets 26557 bytes 34149730 (32.5 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 14965 bytes 2298777 (2.1 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Best,
--
William
next prev parent reply other threads:[~2018-01-08 10:30 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-07 23:49 brcmfmac: set p2p_disc error on BCM4350 William Dauchy
2018-01-08 9:31 ` Arend van Spriel
2018-01-08 10:30 ` William Dauchy [this message]
2018-01-15 10:29 ` William Dauchy
2018-01-15 19:48 ` Arend van Spriel
2018-01-15 20:03 ` William Dauchy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180108103012.GA1957@paf \
--to=wdauchy@gmail.com \
--cc=arend.vanspriel@broadcom.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.