From: Denis Kenzior <denkenz@gmail.com>
To: linux-wireless@vger.kernel.org
Cc: Denis Kenzior <denkenz@gmail.com>
Subject: [RFC v2 5/5] mac80211: Add support for tx_control_port
Date: Wed, 10 Jan 2018 11:09:38 -0600 [thread overview]
Message-ID: <20180110170938.2341-6-denkenz@gmail.com> (raw)
In-Reply-To: <20180110170938.2341-1-denkenz@gmail.com>
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
---
net/mac80211/cfg.c | 1 +
net/mac80211/ieee80211_i.h | 3 +++
net/mac80211/main.c | 1 +
net/mac80211/tx.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 51 insertions(+)
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index f53bfb27295f..71cb45e517b0 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -3787,4 +3787,5 @@ const struct cfg80211_ops mac80211_config_ops = {
.add_nan_func = ieee80211_add_nan_func,
.del_nan_func = ieee80211_del_nan_func,
.set_multicast_to_unicast = ieee80211_set_multicast_to_unicast,
+ .tx_control_port = ieee80211_tx_control_port,
};
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 6f91aea6a4cb..be444305ef06 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1735,6 +1735,9 @@ void ieee80211_check_fast_xmit(struct sta_info *sta);
void ieee80211_check_fast_xmit_all(struct ieee80211_local *local);
void ieee80211_check_fast_xmit_iface(struct ieee80211_sub_if_data *sdata);
void ieee80211_clear_fast_xmit(struct sta_info *sta);
+int ieee80211_tx_control_port(struct wiphy *wiphy, struct net_device *dev,
+ const u8 *buf, size_t len,
+ const u8 *dest, u16 proto, bool unencrypted);
/* HT */
void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata,
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 0785d04a80bc..fe163c31d431 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -976,6 +976,7 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
/* mac80211 supports control port protocol changing */
local->hw.wiphy->flags |= WIPHY_FLAG_CONTROL_PORT_PROTOCOL;
+ local->hw.wiphy->flags |= WIPHY_FLAG_CONTROL_PORT_OVER_NL80211;
if (ieee80211_hw_check(&local->hw, SIGNAL_DBM)) {
local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 25904af38839..c22d2fa02d76 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -4754,3 +4754,49 @@ void __ieee80211_tx_skb_tid_band(struct ieee80211_sub_if_data *sdata,
ieee80211_xmit(sdata, NULL, skb);
local_bh_enable();
}
+
+int ieee80211_tx_control_port(struct wiphy *wiphy, struct net_device *dev,
+ const u8 *buf, size_t len,
+ const u8 *dest, u16 proto, bool unencrypted)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = sdata->local;
+ struct sk_buff *skb;
+ struct ethhdr *ehdr;
+ u32 flags;
+
+ /* Only accept CONTROL_PORT_PROTOCOL configured in CONNECT/ASSOCIATE
+ * or Pre-Authentication
+ */
+ if (proto != sdata->control_port_protocol &&
+ proto != cpu_to_be16(0x88c7))
+ return -EINVAL;
+
+ if (unencrypted)
+ flags = IEEE80211_TX_INTFL_DONT_ENCRYPT;
+ else
+ flags = 0;
+
+ skb = dev_alloc_skb(local->hw.extra_tx_headroom +
+ sizeof(struct ethhdr) + len);
+ if (!skb)
+ return -ENOMEM;
+
+ skb_reserve(skb, local->hw.extra_tx_headroom + sizeof(struct ethhdr));
+
+ skb_put_data(skb, buf, len);
+
+ ehdr = skb_push(skb, sizeof(struct ethhdr));
+ memcpy(ehdr->h_dest, dest, ETH_ALEN);
+ memcpy(ehdr->h_source, sdata->vif.addr, ETH_ALEN);
+ ehdr->h_proto = proto;
+
+ skb->dev = dev;
+ skb->protocol = htons(ETH_P_802_3);
+ skb_reset_network_header(skb);
+ skb_reset_mac_header(skb);
+
+ __ieee80211_subif_start_xmit(skb, skb->dev, flags);
+
+ return 0;
+}
--
2.13.5
next prev parent reply other threads:[~2018-01-10 17:09 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-10 17:09 [RFC v2 0/5] EAPoL over NL80211 Denis Kenzior
2018-01-10 17:09 ` [RFC v2 1/5] nl80211: Add CONTROL_PORT_OVER_NL80211 attribute Denis Kenzior
2018-01-15 12:58 ` Johannes Berg
2018-01-10 17:09 ` [RFC v2 2/5] nl80211: Add CMD_CONTROL_PORT_FRAME API Denis Kenzior
2018-01-15 13:04 ` Johannes Berg
2018-01-10 17:09 ` [RFC v2 3/5] mac80211: Send control port frames over nl80211 Denis Kenzior
2018-01-15 13:09 ` Johannes Berg
2018-01-15 15:24 ` Denis Kenzior
2018-01-16 13:33 ` Johannes Berg
2018-01-10 17:09 ` [RFC v2 4/5] nl80211: Implement TX of control port frames Denis Kenzior
2018-01-15 13:14 ` Johannes Berg
2018-01-15 16:03 ` Denis Kenzior
2018-01-16 13:32 ` Johannes Berg
2018-01-10 17:09 ` Denis Kenzior [this message]
2018-01-15 13:15 ` [RFC v2 5/5] mac80211: Add support for tx_control_port Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180110170938.2341-6-denkenz@gmail.com \
--to=denkenz@gmail.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.