From: "Álvaro Fernández Rojas" <noltari@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v5 4/4] mips: bmips: enable the SPI flash on the Comtrend AR-5387un
Date: Mon, 15 Jan 2018 19:45:44 +0100 [thread overview]
Message-ID: <20180115184544.17841-5-noltari@gmail.com> (raw)
In-Reply-To: <20180115184544.17841-1-noltari@gmail.com>
It's a Macronix (mx25l12805d) 16 MB SPI flash.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
---
v5: no changes
v4: Sync with master.
v3: switch to CONFIG_BCM63XX_HSSPI
v2: no changes
arch/mips/dts/comtrend,ar-5387un.dts | 12 ++++++++++++
configs/comtrend_ar5387un_ram_defconfig | 8 ++++++++
2 files changed, 20 insertions(+)
diff --git a/arch/mips/dts/comtrend,ar-5387un.dts b/arch/mips/dts/comtrend,ar-5387un.dts
index 73f2b49b76..6067881a78 100644
--- a/arch/mips/dts/comtrend,ar-5387un.dts
+++ b/arch/mips/dts/comtrend,ar-5387un.dts
@@ -51,6 +51,18 @@
};
};
+&spi {
+ status = "okay";
+
+ spi-flash at 0 {
+ compatible = "spi-flash";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <33333334>;
+ };
+};
+
&uart0 {
u-boot,dm-pre-reloc;
status = "okay";
diff --git a/configs/comtrend_ar5387un_ram_defconfig b/configs/comtrend_ar5387un_ram_defconfig
index b64018ae71..59ec86b253 100644
--- a/configs/comtrend_ar5387un_ram_defconfig
+++ b/configs/comtrend_ar5387un_ram_defconfig
@@ -41,3 +41,11 @@ CONFIG_RESET_BCM6345=y
# CONFIG_SPL_SERIAL_PRESENT is not set
CONFIG_DM_SERIAL=y
CONFIG_BCM6345_SERIAL=y
+CONFIG_BCM63XX_HSSPI=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_SPI_FLASH_MACRONIX=y
--
2.11.0
next prev parent reply other threads:[~2018-01-15 18:45 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-23 19:18 [U-Boot] [PATCH 0/4] mips: bmips: add HSSPI support Álvaro Fernández Rojas
2017-05-23 19:18 ` [U-Boot] [PATCH 1/4] dm: spi: add BCM63xx HSSPI driver Álvaro Fernández Rojas
2017-06-01 3:10 ` Simon Glass
2017-05-23 19:18 ` [U-Boot] [PATCH 2/4] mips: bmips: add bcm63xx-hsspi driver support for BCM6328 Álvaro Fernández Rojas
2017-06-01 3:10 ` Simon Glass
2017-05-23 19:18 ` [U-Boot] [PATCH 3/4] mips: bmips: add bcm63xx-hsspi driver support for BCM63268 Álvaro Fernández Rojas
2017-06-01 3:10 ` Simon Glass
2017-05-23 19:18 ` [U-Boot] [PATCH 4/4] mips: bmips: enable the SPI flash on the Comtrend AR-5387un Álvaro Fernández Rojas
2017-06-01 3:10 ` Simon Glass
2017-06-03 10:15 ` [U-Boot] [PATCH v2 0/4] mips: bmips: add HSSPI support Álvaro Fernández Rojas
2017-06-03 10:16 ` [U-Boot] [PATCH v2 1/4] dm: spi: add BCM63xx HSSPI driver Álvaro Fernández Rojas
2017-06-04 9:02 ` Daniel Schwierzeck
2017-06-05 16:03 ` Álvaro Fernández Rojas
2017-06-03 10:16 ` [U-Boot] [PATCH v2 2/4] mips: bmips: add bcm63xx-hsspi driver support for BCM6328 Álvaro Fernández Rojas
2017-06-04 9:04 ` Daniel Schwierzeck
2017-06-05 16:04 ` Álvaro Fernández Rojas
2017-06-03 10:16 ` [U-Boot] [PATCH v2 3/4] mips: bmips: add bcm63xx-hsspi driver support for BCM63268 Álvaro Fernández Rojas
2017-06-04 9:04 ` Daniel Schwierzeck
2017-06-05 16:04 ` Álvaro Fernández Rojas
2017-06-03 10:16 ` [U-Boot] [PATCH v2 4/4] mips: bmips: enable the SPI flash on the Comtrend AR-5387un Álvaro Fernández Rojas
2017-06-04 9:05 ` Daniel Schwierzeck
2017-06-05 16:04 ` Álvaro Fernández Rojas
2017-06-14 9:59 ` [U-Boot] [PATCH v3 0/4] mips: bmips: add HSSPI support Álvaro Fernández Rojas
2017-06-14 9:59 ` [U-Boot] [PATCH v3 1/4] dm: spi: add BCM63xx HSSPI driver Álvaro Fernández Rojas
2017-06-14 9:59 ` [U-Boot] [PATCH v3 2/4] mips: bmips: add bcm63xx-hsspi driver support for BCM6328 Álvaro Fernández Rojas
2017-06-14 9:59 ` [U-Boot] [PATCH v3 3/4] mips: bmips: add bcm63xx-hsspi driver support for BCM63268 Álvaro Fernández Rojas
2017-06-14 9:59 ` [U-Boot] [PATCH v3 4/4] mips: bmips: enable the SPI flash on the Comtrend AR-5387un Álvaro Fernández Rojas
2017-07-30 12:14 ` [U-Boot] [PATCH v4 0/4] mips: bmips: add HSSPI support Álvaro Fernández Rojas
2017-07-30 12:14 ` [U-Boot] [PATCH v4 1/4] dm: spi: add BCM63xx HSSPI driver Álvaro Fernández Rojas
2017-08-11 9:42 ` Jagan Teki
2017-12-26 13:20 ` Álvaro Fernández Rojas
2017-07-30 12:14 ` [U-Boot] [PATCH v4 2/4] mips: bmips: add bcm63xx-hsspi driver support for BCM6328 Álvaro Fernández Rojas
2017-07-30 12:14 ` [U-Boot] [PATCH v4 3/4] mips: bmips: add bcm63xx-hsspi driver support for BCM63268 Álvaro Fernández Rojas
2017-07-30 12:14 ` [U-Boot] [PATCH v4 4/4] mips: bmips: enable the SPI flash on the Comtrend AR-5387un Álvaro Fernández Rojas
2018-01-15 18:45 ` [U-Boot] [PATCH v5 0/4] mips: bmips: add HSSPI support Álvaro Fernández Rojas
2018-01-15 18:45 ` [U-Boot] [PATCH v5 1/4] dm: spi: add BCM63xx HSSPI driver Álvaro Fernández Rojas
2018-01-15 18:45 ` [U-Boot] [PATCH v5 2/4] mips: bmips: add bcm63xx-hsspi driver support for BCM6328 Álvaro Fernández Rojas
2018-01-15 18:45 ` [U-Boot] [PATCH v5 3/4] mips: bmips: add bcm63xx-hsspi driver support for BCM63268 Álvaro Fernández Rojas
2018-01-15 18:45 ` Álvaro Fernández Rojas [this message]
2018-01-20 1:13 ` [U-Boot] [PATCH v6 0/4] mips: bmips: add HSSPI support Álvaro Fernández Rojas
2018-01-20 1:13 ` [U-Boot] [PATCH v6 1/4] dm: spi: add BCM63xx HSSPI driver Álvaro Fernández Rojas
2018-01-20 1:13 ` [U-Boot] [PATCH v6 2/4] mips: bmips: add bcm63xx-hsspi driver support for BCM6328 Álvaro Fernández Rojas
2018-01-20 1:13 ` [U-Boot] [PATCH v6 3/4] mips: bmips: add bcm63xx-hsspi driver support for BCM63268 Álvaro Fernández Rojas
2018-01-20 1:13 ` [U-Boot] [PATCH v6 4/4] mips: bmips: enable the SPI flash on the Comtrend AR-5387un Álvaro Fernández Rojas
2018-01-22 5:11 ` [U-Boot] [PATCH v6 0/4] mips: bmips: add HSSPI support Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180115184544.17841-5-noltari@gmail.com \
--to=noltari@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.