From: John Snow <jsnow@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, jcody@redhat.com, qemu-devel@nongnu.org,
stefanha@redhat.com, mreitz@redhat.com,
John Snow <jsnow@redhat.com>
Subject: [Qemu-devel] [PATCH v2 11/13] block/mirror: remove block_job_sleep_ns calls
Date: Fri, 19 Jan 2018 15:58:45 -0500 [thread overview]
Message-ID: <20180119205847.7141-12-jsnow@redhat.com> (raw)
In-Reply-To: <20180119205847.7141-1-jsnow@redhat.com>
We're attempting to slacken the mirror loop in three different places,
but we can combine these three attempts. Combine the early loop call to
block_job_pause_point with the two late-loop calls to block_job_sleep_ns.
When delay_ns is 0 and it has not been SLICE_TIME since the last yield,
block_job_relax is merely a call to block_job_pause_point, so this should
be equivalent with the exception that if we have managed to not yield at
all in the last SLICE_TIME ns, we will now do so.
I am not sure that condition was possible,
so this loop should be equivalent.
Signed-off-by: John Snow <jsnow@redhat.com>
---
block/mirror.c | 22 +++++++++++-----------
block/trace-events | 2 +-
2 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/block/mirror.c b/block/mirror.c
index a0e0044de2..192e03694f 100644
--- a/block/mirror.c
+++ b/block/mirror.c
@@ -761,7 +761,7 @@ static void coroutine_fn mirror_run(void *opaque)
assert(!s->dbi);
s->dbi = bdrv_dirty_iter_new(s->dirty_bitmap);
for (;;) {
- uint64_t delay_ns = 0;
+ static uint64_t delay_ns = 0;
int64_t cnt, delta;
bool should_complete;
@@ -770,9 +770,16 @@ static void coroutine_fn mirror_run(void *opaque)
goto immediate_exit;
}
- block_job_pause_point(&s->common);
-
cnt = bdrv_get_dirty_count(s->dirty_bitmap);
+
+ trace_mirror_before_relax(s, cnt, s->synced, delay_ns);
+ if (block_job_relax(&s->common, delay_ns)) {
+ if (!s->synced) {
+ goto immediate_exit;
+ }
+ }
+ delay_ns = 0;
+
/* s->common.offset contains the number of bytes already processed so
* far, cnt is the number of dirty bytes remaining and
* s->bytes_in_flight is the number of bytes currently being
@@ -849,15 +856,8 @@ static void coroutine_fn mirror_run(void *opaque)
}
ret = 0;
- trace_mirror_before_sleep(s, cnt, s->synced, delay_ns);
- if (!s->synced) {
- block_job_sleep_ns(&s->common, delay_ns);
- if (block_job_is_cancelled(&s->common)) {
- break;
- }
- } else if (!should_complete) {
+ if (s->synced && !should_complete) {
delay_ns = (s->in_flight == 0 && cnt == 0 ? SLICE_TIME : 0);
- block_job_sleep_ns(&s->common, delay_ns);
}
}
diff --git a/block/trace-events b/block/trace-events
index 11c8d5f590..60f36f929a 100644
--- a/block/trace-events
+++ b/block/trace-events
@@ -27,7 +27,7 @@ mirror_start(void *bs, void *s, void *opaque) "bs %p s %p opaque %p"
mirror_restart_iter(void *s, int64_t cnt) "s %p dirty count %"PRId64
mirror_before_flush(void *s) "s %p"
mirror_before_drain(void *s, int64_t cnt) "s %p dirty count %"PRId64
-mirror_before_sleep(void *s, int64_t cnt, int synced, uint64_t delay_ns) "s %p dirty count %"PRId64" synced %d delay %"PRIu64"ns"
+mirror_before_relax(void *s, int64_t cnt, int synced, uint64_t delay_ns) "s %p dirty count %"PRId64" synced %d delay %"PRIu64"ns"
mirror_one_iteration(void *s, int64_t offset, uint64_t bytes) "s %p offset %" PRId64 " bytes %" PRIu64
mirror_iteration_done(void *s, int64_t offset, uint64_t bytes, int ret) "s %p offset %" PRId64 " bytes %" PRIu64 " ret %d"
mirror_yield(void *s, int64_t cnt, int buf_free_count, int in_flight) "s %p dirty count %"PRId64" free buffers %d in_flight %d"
--
2.14.3
next prev parent reply other threads:[~2018-01-19 20:59 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-19 20:58 [Qemu-devel] [PATCH v2 00/13] blockjob: refactor mirror_throttle John Snow
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 01/13] blockjob: record time of last entrance John Snow
2018-02-07 22:05 ` Max Reitz
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 02/13] blockjob: consolidate SLICE_TIME definition John Snow
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 03/13] blockjob: create block_job_relax John Snow
2018-02-07 22:12 ` Max Reitz
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 04/13] blockjob: allow block_job_throttle to take delay_ns John Snow
2018-02-07 22:17 ` Max Reitz
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 05/13] block/commit: use block_job_relax John Snow
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 06/13] block/stream: " John Snow
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 07/13] block/backup: " John Snow
2018-02-07 22:19 ` Max Reitz
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 08/13] allow block_job_relax to return -ECANCELED John Snow
2018-02-07 22:27 ` Max Reitz
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 09/13] block/backup: remove yield_and_check John Snow
2018-02-07 22:33 ` Max Reitz
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 10/13] block/mirror: condense cancellation and relax calls John Snow
2018-02-07 22:36 ` Max Reitz
2018-01-19 20:58 ` John Snow [this message]
2018-02-07 22:46 ` [Qemu-devel] [PATCH v2 11/13] block/mirror: remove block_job_sleep_ns calls Max Reitz
2018-02-07 22:56 ` Max Reitz
2018-02-09 23:13 ` John Snow
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 12/13] blockjob: privatize block_job_sleep_ns John Snow
2018-02-07 22:47 ` Max Reitz
2018-01-19 20:58 ` [Qemu-devel] [PATCH v2 13/13] blockjob: remove block_job_pause_point from interface John Snow
2018-02-07 22:50 ` Max Reitz
2018-01-19 21:14 ` [Qemu-devel] [PATCH v2 00/13] blockjob: refactor mirror_throttle no-reply
2018-01-30 20:25 ` John Snow
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180119205847.7141-12-jsnow@redhat.com \
--to=jsnow@redhat.com \
--cc=jcody@redhat.com \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.