From: "Álvaro Fernández Rojas" <noltari@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 3/4] MIPS: add support for Broadcom MIPS BCM6318 SoC family
Date: Sat, 20 Jan 2018 14:17:24 +0100 [thread overview]
Message-ID: <20180120131725.4451-4-noltari@gmail.com> (raw)
In-Reply-To: <20180120131725.4451-1-noltari@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
arch/mips/dts/brcm,bcm6318.dtsi | 156 +++++++++++++++++++++
arch/mips/mach-bmips/Kconfig | 12 ++
include/configs/bmips_bcm6318.h | 25 ++++
include/dt-bindings/clock/bcm6318-clock.h | 37 +++++
.../power-domain/bcm6318-power-domain.h | 13 ++
include/dt-bindings/reset/bcm6318-reset.h | 26 ++++
6 files changed, 269 insertions(+)
create mode 100644 arch/mips/dts/brcm,bcm6318.dtsi
create mode 100644 include/configs/bmips_bcm6318.h
create mode 100644 include/dt-bindings/clock/bcm6318-clock.h
create mode 100644 include/dt-bindings/power-domain/bcm6318-power-domain.h
create mode 100644 include/dt-bindings/reset/bcm6318-reset.h
diff --git a/arch/mips/dts/brcm,bcm6318.dtsi b/arch/mips/dts/brcm,bcm6318.dtsi
new file mode 100644
index 0000000000..d501a9410a
--- /dev/null
+++ b/arch/mips/dts/brcm,bcm6318.dtsi
@@ -0,0 +1,156 @@
+/*
+ * Copyright (C) 2018 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <dt-bindings/clock/bcm6318-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/power-domain/bcm6318-power-domain.h>
+#include <dt-bindings/reset/bcm6318-reset.h>
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "brcm,bcm6318";
+
+ aliases {
+ spi0 = &spi;
+ };
+
+ cpus {
+ reg = <0x10000000 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ u-boot,dm-pre-reloc;
+
+ cpu at 0 {
+ compatible = "brcm,bcm6318-cpu", "mips,mips4Kc";
+ device_type = "cpu";
+ reg = <0>;
+ u-boot,dm-pre-reloc;
+ };
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ u-boot,dm-pre-reloc;
+
+ hsspi_pll: hsspi-pll {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <250000000>;
+ };
+
+ periph_osc: periph-osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ u-boot,dm-pre-reloc;
+ };
+
+ periph_clk: periph-clk {
+ compatible = "brcm,bcm6345-clk";
+ reg = <0x10000004 0x4>;
+ #clock-cells = <1>;
+ };
+ };
+
+ ubus {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ u-boot,dm-pre-reloc;
+
+ periph_rst: reset-controller at 10000010 {
+ compatible = "brcm,bcm6345-reset";
+ reg = <0x10000010 0x4>;
+ #reset-cells = <1>;
+ };
+
+ wdt: watchdog at 10000068 {
+ compatible = "brcm,bcm6345-wdt";
+ reg = <0x10000068 0xc>;
+ clocks = <&periph_osc>;
+ };
+
+ wdt-reboot {
+ compatible = "wdt-reboot";
+ wdt = <&wdt>;
+ };
+
+ pll_cntl: syscon at 10000074 {
+ compatible = "syscon";
+ reg = <0x10000074 0x4>;
+ };
+
+ syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&pll_cntl>;
+ offset = <0x0>;
+ mask = <0x1>;
+ };
+
+ gpio1: gpio-controller at 10000080 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x10000080 0x4>, <0x10000088 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ status = "disabled";
+ };
+
+ gpio0: gpio-controller at 10000084 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x10000084 0x4>, <0x1000008c 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ status = "disabled";
+ };
+
+ uart0: serial at 10000100 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x10000100 0x18>;
+ clocks = <&periph_osc>;
+
+ status = "disabled";
+ };
+
+ leds: led-controller at 10000200 {
+ compatible = "brcm,bcm6328-leds";
+ reg = <0x10000200 0x28>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ periph_pwr: power-controller at 100008e8 {
+ compatible = "brcm,bcm6328-power-domain";
+ reg = <0x100008e8 0x4>;
+ #power-domain-cells = <1>;
+ };
+
+ spi: spi at 10003000 {
+ compatible = "brcm,bcm6328-hsspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x10003000 0x600>;
+ clocks = <&periph_clk BCM6318_CLK_HSSPI>, <&hsspi_pll>;
+ clock-names = "hsspi", "pll";
+ resets = <&periph_rst BCM6318_RST_SPI>;
+ spi-max-frequency = <33333334>;
+ num-cs = <3>;
+
+ status = "disabled";
+ };
+
+ memory-controller at 10004000 {
+ compatible = "brcm,bcm6318-mc";
+ reg = <0x10004000 0x38>;
+ u-boot,dm-pre-reloc;
+ };
+ };
+};
diff --git a/arch/mips/mach-bmips/Kconfig b/arch/mips/mach-bmips/Kconfig
index 936b67f5f2..c9b56f5ca7 100644
--- a/arch/mips/mach-bmips/Kconfig
+++ b/arch/mips/mach-bmips/Kconfig
@@ -6,6 +6,7 @@ config SYS_MALLOC_F_LEN
config SYS_SOC
default "bcm3380" if SOC_BMIPS_BCM3380
+ default "bcm6318" if SOC_BMIPS_BCM6318
default "bcm6328" if SOC_BMIPS_BCM6328
default "bcm6338" if SOC_BMIPS_BCM6338
default "bcm6348" if SOC_BMIPS_BCM6348
@@ -27,6 +28,17 @@ config SOC_BMIPS_BCM3380
help
This supports BMIPS BCM3380 family.
+config SOC_BMIPS_BCM6318
+ bool "BMIPS BCM6318 family"
+ select SUPPORTS_BIG_ENDIAN
+ select SUPPORTS_CPU_MIPS32_R1
+ select MIPS_TUNE_4KC
+ select MIPS_L1_CACHE_SHIFT_4
+ select SWAP_IO_SPACE
+ select SYSRESET_SYSCON
+ help
+ This supports BMIPS BCM6318 family.
+
config SOC_BMIPS_BCM6328
bool "BMIPS BCM6328 family"
select SUPPORTS_BIG_ENDIAN
diff --git a/include/configs/bmips_bcm6318.h b/include/configs/bmips_bcm6318.h
new file mode 100644
index 0000000000..454a7b7f7b
--- /dev/null
+++ b/include/configs/bmips_bcm6318.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2018 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_BMIPS_BCM6318_H
+#define __CONFIG_BMIPS_BCM6318_H
+
+/* CPU */
+#define CONFIG_SYS_MIPS_TIMER_FREQ 166500000
+
+/* RAM */
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_SDRAM_BASE 0x80000000
+
+/* U-Boot */
+#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + 0x100000
+
+#if defined(CONFIG_BMIPS_BOOT_RAM)
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_INIT_SP_OFFSET 0x2000
+#endif
+
+#endif /* __CONFIG_BMIPS_BCM6318_H */
diff --git a/include/dt-bindings/clock/bcm6318-clock.h b/include/dt-bindings/clock/bcm6318-clock.h
new file mode 100644
index 0000000000..1e3dc16f90
--- /dev/null
+++ b/include/dt-bindings/clock/bcm6318-clock.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2018 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * Derived from linux/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_BCM6318_H
+#define __DT_BINDINGS_CLOCK_BCM6318_H
+
+#define BCM6318_CLK_ADSL_ASB 0
+#define BCM6318_CLK_USB_ASB 1
+#define BCM6318_CLK_MIPS_ASB 2
+#define BCM6318_CLK_PCIE_ASB 3
+#define BCM6318_CLK_PHYMIPS_ASB 4
+#define BCM6318_CLK_ROBOSW_ASB 5
+#define BCM6318_CLK_SAR_ASB 6
+#define BCM6318_CLK_SDR_ASB 7
+#define BCM6318_CLK_SWREG_ASB 8
+#define BCM6318_CLK_PERIPH_ASB 9
+#define BCM6318_CLK_CPUBUS160 10
+#define BCM6318_CLK_ADSL 11
+#define BCM6318_CLK_SAR125 12
+#define BCM6318_CLK_MIPS 13
+#define BCM6318_CLK_PCIE 14
+#define BCM6318_CLK_ROBOSW250 16
+#define BCM6318_CLK_ROBOSW025 17
+#define BCM6318_CLK_SDR 19
+#define BCM6318_CLK_USB 20
+#define BCM6318_CLK_HSSPI 25
+#define BCM6318_CLK_PCIE25 27
+#define BCM6318_CLK_PHYMIPS 28
+#define BCM6318_CLK_AFE 29
+#define BCM6318_CLK_QPROC 30
+
+#endif /* __DT_BINDINGS_CLOCK_BCM6318_H */
diff --git a/include/dt-bindings/power-domain/bcm6318-power-domain.h b/include/dt-bindings/power-domain/bcm6318-power-domain.h
new file mode 100644
index 0000000000..38627d95c5
--- /dev/null
+++ b/include/dt-bindings/power-domain/bcm6318-power-domain.h
@@ -0,0 +1,13 @@
+/*
+ * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __DT_BINDINGS_POWER_DOMAIN_BCM6318_H
+#define __DT_BINDINGS_POWER_DOMAIN_BCM6318_H
+
+#define BCM6318_PWR_PCIE 0
+#define BCM6318_PWR_USB 1
+
+#endif /* __DT_BINDINGS_POWER_DOMAIN_BCM6318_H */
diff --git a/include/dt-bindings/reset/bcm6318-reset.h b/include/dt-bindings/reset/bcm6318-reset.h
new file mode 100644
index 0000000000..781d7fbc4d
--- /dev/null
+++ b/include/dt-bindings/reset/bcm6318-reset.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2018 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * Derived from linux/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __DT_BINDINGS_RESET_BCM6318_H
+#define __DT_BINDINGS_RESET_BCM6318_H
+
+#define BCM6318_RST_SPI 0
+#define BCM6318_RST_EPHY 1
+#define BCM6318_RST_SAR 2
+#define BCM6318_RST_ENETSW 3
+#define BCM6318_RST_USBD 4
+#define BCM6318_RST_USBH 5
+#define BCM6318_RST_PCIE_CORE 6
+#define BCM6318_RST_PCIE 7
+#define BCM6318_RST_PCIE_EXT 8
+#define BCM6318_RST_PCIE_HARD 9
+#define BCM6318_RST_ADSL 10
+#define BCM6318_RST_PHYMIPS 11
+#define BCM6318_RST_HOSTMIPS 11
+
+#endif /* __DT_BINDINGS_RESET_BCM6318_H */
--
2.11.0
next prev parent reply other threads:[~2018-01-20 13:17 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-20 13:17 [U-Boot] [PATCH 0/4] mips: bmips: add BCM6318 SoC support Álvaro Fernández Rojas
2018-01-20 13:17 ` [U-Boot] [PATCH 1/4] dm: cpu: bmips: add BCM6318 support Álvaro Fernández Rojas
2018-01-20 13:17 ` [U-Boot] [PATCH 2/4] dm: ram: " Álvaro Fernández Rojas
2018-01-20 13:17 ` Álvaro Fernández Rojas [this message]
2018-01-20 13:17 ` [U-Boot] [PATCH 4/4] MIPS: add BMIPS Comtrend AR-5315u board Álvaro Fernández Rojas
2018-01-20 18:16 ` [U-Boot] [PATCH v2 0/4] mips: bmips: add BCM6318 SoC support Álvaro Fernández Rojas
2018-01-20 18:16 ` [U-Boot] [PATCH v2 1/4] dm: cpu: bmips: add BCM6318 support Álvaro Fernández Rojas
2018-01-21 16:47 ` Daniel Schwierzeck
2018-01-21 17:04 ` Daniel Schwierzeck
2018-01-20 18:16 ` [U-Boot] [PATCH v2 2/4] dm: ram: " Álvaro Fernández Rojas
2018-01-21 16:47 ` Daniel Schwierzeck
2018-01-21 17:03 ` Daniel Schwierzeck
2018-01-20 18:16 ` [U-Boot] [PATCH v2 3/4] MIPS: add support for Broadcom MIPS BCM6318 SoC family Álvaro Fernández Rojas
2018-01-21 16:47 ` Daniel Schwierzeck
2018-01-20 18:16 ` [U-Boot] [PATCH v2 4/4] MIPS: add BMIPS Comtrend AR-5315u board Álvaro Fernández Rojas
2018-01-21 16:48 ` Daniel Schwierzeck
2018-01-26 12:17 ` [U-Boot] [PATCH 0/4] mips: bmips: add BCM6318 SoC support Daniel Schwierzeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180120131725.4451-4-noltari@gmail.com \
--to=noltari@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.