diff for duplicates of <20180121161319.GA8017@lunn.ch> diff --git a/a/1.txt b/N1/1.txt index cd6b322..91f38e3 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -2,7 +2,7 @@ > connection, then I suppose you may want to go with the GenericSerialBus > route. However, looking at the sample device tree description: > -> davinci_mdio: ethernet@5c030000 { +> davinci_mdio: ethernet at 5c030000 { > compatible = "ti,davinci_mdio"; > reg = <0x5c030000 0x1000>; > #address-cells = <1>; @@ -11,11 +11,11 @@ > reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; > reset-delay-us = <2>; > -> ethphy0: ethernet-phy@1 { +> ethphy0: ethernet-phy at 1 { > reg = <1>; > }; > -> ethphy1: ethernet-phy@3 { +> ethphy1: ethernet-phy at 3 { > reg = <3>; > }; > }; diff --git a/a/content_digest b/N1/content_digest index a248280..3c742db 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -8,32 +8,17 @@ "ref\020180120195246.GC27654@lahna.fi.intel.com\0" "ref\020180121010840.GB1217@lunn.ch\0" "ref\020180121102700.GF27654@lahna.fi.intel.com\0" - "From\0Andrew Lunn <andrew@lunn.ch>\0" - "Subject\0Re: [net-next: PATCH 0/8] Armada 7k/8k PP2 ACPI support\0" + "From\0andrew@lunn.ch (Andrew Lunn)\0" + "Subject\0[net-next: PATCH 0/8] Armada 7k/8k PP2 ACPI support\0" "Date\0Sun, 21 Jan 2018 17:13:19 +0100\0" - "To\0Mika Westerberg <mika.westerberg@linux.intel.com>\0" - "Cc\0Marcin Wojtas <mw@semihalf.com>" - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> - Graeme Gregory <graeme.gregory@linaro.org> - Ard Biesheuvel <ard.biesheuvel@linaro.org> - linux-acpi@vger.kernel.org <linux-acpi@vger.kernel.org> - linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org> - linux-arm-kernel@lists.infradead.org <linux-arm-kernel@lists.infradead.org> - <netdev@vger.kernel.org> <netdev@vger.kernel.org> - David S. Miller <davem@davemloft.net> - Russell King - ARM Linux <linux@arm.linux.org.uk> - Rafael J. Wysocki <rafael.j.wysocki@intel.com> - Florian Fainelli <f.fainelli@gmail.com> - Antoine T?nart <antoine.tenart@free-electrons.com> - Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - " Gregory CLEMENT <gregory.clement@free-electrons.com>\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "> Right. So if you need to have some additional \"parameters\" with the\n" "> connection, then I suppose you may want to go with the GenericSerialBus\n" "> route. However, looking at the sample device tree description:\n" "> \n" - "> davinci_mdio: ethernet@5c030000 {\n" + "> davinci_mdio: ethernet at 5c030000 {\n" "> compatible = \"ti,davinci_mdio\";\n" "> reg = <0x5c030000 0x1000>;\n" "> #address-cells = <1>;\n" @@ -42,11 +27,11 @@ "> reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;\n" "> reset-delay-us = <2>;\n" "> \n" - "> ethphy0: ethernet-phy@1 {\n" + "> ethphy0: ethernet-phy at 1 {\n" "> reg = <1>;\n" "> };\n" "> \n" - "> ethphy1: ethernet-phy@3 {\n" + "> ethphy1: ethernet-phy at 3 {\n" "> reg = <3>;\n" "> };\n" "> };\n" @@ -88,4 +73,4 @@ "\n" "\t Andrew" -531743d314c5f932d7cfe97edcd20e891c5b347284b7a0d7d3d96d46a1ddaa83 +39b6f0878166bf922fff65caf4ceebf863d9baa7d0f098f68a55a88f100d2e5e
diff --git a/a/content_digest b/N2/content_digest index a248280..44f2a62 100644 --- a/a/content_digest +++ b/N2/content_digest @@ -26,7 +26,14 @@ Florian Fainelli <f.fainelli@gmail.com> Antoine T?nart <antoine.tenart@free-electrons.com> Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - " Gregory CLEMENT <gregory.clement@free-electrons.com>\0" + Gregory CLEMENT <gregory.clement@free-electrons.com> + Ezequiel Garcia <ezequiel.garcia@free-electrons.com> + Nadav Haklai <nadavh@marvell.com> + Neta Zur Hershkovits <neta@marvell.com> + Grzegorz Jaszczyk <jaz@semihalf.com> + Tomasz Nowicki <tn@semihalf.com> + Hanjun Guo <hanjun.guo@linaro.org> + " Sudeep Holla <sudeep.holla@arm.com>\0" "\00:1\0" "b\0" "> Right. So if you need to have some additional \"parameters\" with the\n" @@ -88,4 +95,4 @@ "\n" "\t Andrew" -531743d314c5f932d7cfe97edcd20e891c5b347284b7a0d7d3d96d46a1ddaa83 +a50fbb35a1f2b7a1aba7a0db30c704495e2ac7a3f33b7c70d3e63f576be2cc08
diff --git a/a/content_digest b/N3/content_digest index a248280..7e6762c 100644 --- a/a/content_digest +++ b/N3/content_digest @@ -26,7 +26,8 @@ Florian Fainelli <f.fainelli@gmail.com> Antoine T?nart <antoine.tenart@free-electrons.com> Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - " Gregory CLEMENT <gregory.clement@free-electrons.com>\0" + Gregory CLEMENT <gregory.clement@free-electrons.com> + "\0" "\00:1\0" "b\0" "> Right. So if you need to have some additional \"parameters\" with the\n" @@ -88,4 +89,4 @@ "\n" "\t Andrew" -531743d314c5f932d7cfe97edcd20e891c5b347284b7a0d7d3d96d46a1ddaa83 +e197becca40753377d8a85c803b28b4593869775e17300c35f7bfa6267eb8c68
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.