From: Arnaldo Carvalho de Melo <acme@kernel.org>
To: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org, linux-perf-users@vger.kernel.org,
Hendrik Brueckner <brueckner@linux.vnet.ibm.com>,
Jiri Olsa <jolsa@redhat.com>, Michael Petlan <mpetlan@redhat.com>,
linux-s390@vger.kernel.org,
Arnaldo Carvalho de Melo <acme@redhat.com>
Subject: [PATCH 10/43] tools include arch: Grab a copy of errno.h for arch's supported by perf
Date: Tue, 23 Jan 2018 10:12:18 -0300 [thread overview]
Message-ID: <20180123131251.28197-11-acme@kernel.org> (raw)
In-Reply-To: <20180123131251.28197-1-acme@kernel.org>
From: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
For each arch in tools/perf/arch, grab a copy of errno.h.
This is a pre-req to generate an architecture specific mapping of errno
numbers to their names. This errno mapping can be used by perf trace to
support cross-architecture trace reports and to get rid of the
audit-libs dependency.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: linux-s390@vger.kernel.org
LPU-Reference: 1516352177-11106-2-git-send-email-brueckner@linux.vnet.ibm.com
Link: https://lkml.kernel.org/n/tip-73azjhrzpjsskwi129020i2u@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/arch/alpha/include/uapi/asm/errno.h | 128 +++++++++++++++++++++++++++
tools/arch/mips/include/asm/errno.h | 17 ++++
tools/arch/mips/include/uapi/asm/errno.h | 130 ++++++++++++++++++++++++++++
tools/arch/parisc/include/uapi/asm/errno.h | 128 +++++++++++++++++++++++++++
tools/arch/powerpc/include/uapi/asm/errno.h | 10 +++
tools/arch/sparc/include/uapi/asm/errno.h | 118 +++++++++++++++++++++++++
tools/arch/x86/include/uapi/asm/errno.h | 1 +
| 7 ++
8 files changed, 539 insertions(+)
create mode 100644 tools/arch/alpha/include/uapi/asm/errno.h
create mode 100644 tools/arch/mips/include/asm/errno.h
create mode 100644 tools/arch/mips/include/uapi/asm/errno.h
create mode 100644 tools/arch/parisc/include/uapi/asm/errno.h
create mode 100644 tools/arch/powerpc/include/uapi/asm/errno.h
create mode 100644 tools/arch/sparc/include/uapi/asm/errno.h
create mode 100644 tools/arch/x86/include/uapi/asm/errno.h
diff --git a/tools/arch/alpha/include/uapi/asm/errno.h b/tools/arch/alpha/include/uapi/asm/errno.h
new file mode 100644
index 000000000000..3d265f6babaf
--- /dev/null
+++ b/tools/arch/alpha/include/uapi/asm/errno.h
@@ -0,0 +1,128 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _ALPHA_ERRNO_H
+#define _ALPHA_ERRNO_H
+
+#include <asm-generic/errno-base.h>
+
+#undef EAGAIN /* 11 in errno-base.h */
+
+#define EDEADLK 11 /* Resource deadlock would occur */
+
+#define EAGAIN 35 /* Try again */
+#define EWOULDBLOCK EAGAIN /* Operation would block */
+#define EINPROGRESS 36 /* Operation now in progress */
+#define EALREADY 37 /* Operation already in progress */
+#define ENOTSOCK 38 /* Socket operation on non-socket */
+#define EDESTADDRREQ 39 /* Destination address required */
+#define EMSGSIZE 40 /* Message too long */
+#define EPROTOTYPE 41 /* Protocol wrong type for socket */
+#define ENOPROTOOPT 42 /* Protocol not available */
+#define EPROTONOSUPPORT 43 /* Protocol not supported */
+#define ESOCKTNOSUPPORT 44 /* Socket type not supported */
+#define EOPNOTSUPP 45 /* Operation not supported on transport endpoint */
+#define EPFNOSUPPORT 46 /* Protocol family not supported */
+#define EAFNOSUPPORT 47 /* Address family not supported by protocol */
+#define EADDRINUSE 48 /* Address already in use */
+#define EADDRNOTAVAIL 49 /* Cannot assign requested address */
+#define ENETDOWN 50 /* Network is down */
+#define ENETUNREACH 51 /* Network is unreachable */
+#define ENETRESET 52 /* Network dropped connection because of reset */
+#define ECONNABORTED 53 /* Software caused connection abort */
+#define ECONNRESET 54 /* Connection reset by peer */
+#define ENOBUFS 55 /* No buffer space available */
+#define EISCONN 56 /* Transport endpoint is already connected */
+#define ENOTCONN 57 /* Transport endpoint is not connected */
+#define ESHUTDOWN 58 /* Cannot send after transport endpoint shutdown */
+#define ETOOMANYREFS 59 /* Too many references: cannot splice */
+#define ETIMEDOUT 60 /* Connection timed out */
+#define ECONNREFUSED 61 /* Connection refused */
+#define ELOOP 62 /* Too many symbolic links encountered */
+#define ENAMETOOLONG 63 /* File name too long */
+#define EHOSTDOWN 64 /* Host is down */
+#define EHOSTUNREACH 65 /* No route to host */
+#define ENOTEMPTY 66 /* Directory not empty */
+
+#define EUSERS 68 /* Too many users */
+#define EDQUOT 69 /* Quota exceeded */
+#define ESTALE 70 /* Stale file handle */
+#define EREMOTE 71 /* Object is remote */
+
+#define ENOLCK 77 /* No record locks available */
+#define ENOSYS 78 /* Function not implemented */
+
+#define ENOMSG 80 /* No message of desired type */
+#define EIDRM 81 /* Identifier removed */
+#define ENOSR 82 /* Out of streams resources */
+#define ETIME 83 /* Timer expired */
+#define EBADMSG 84 /* Not a data message */
+#define EPROTO 85 /* Protocol error */
+#define ENODATA 86 /* No data available */
+#define ENOSTR 87 /* Device not a stream */
+
+#define ENOPKG 92 /* Package not installed */
+
+#define EILSEQ 116 /* Illegal byte sequence */
+
+/* The following are just random noise.. */
+#define ECHRNG 88 /* Channel number out of range */
+#define EL2NSYNC 89 /* Level 2 not synchronized */
+#define EL3HLT 90 /* Level 3 halted */
+#define EL3RST 91 /* Level 3 reset */
+
+#define ELNRNG 93 /* Link number out of range */
+#define EUNATCH 94 /* Protocol driver not attached */
+#define ENOCSI 95 /* No CSI structure available */
+#define EL2HLT 96 /* Level 2 halted */
+#define EBADE 97 /* Invalid exchange */
+#define EBADR 98 /* Invalid request descriptor */
+#define EXFULL 99 /* Exchange full */
+#define ENOANO 100 /* No anode */
+#define EBADRQC 101 /* Invalid request code */
+#define EBADSLT 102 /* Invalid slot */
+
+#define EDEADLOCK EDEADLK
+
+#define EBFONT 104 /* Bad font file format */
+#define ENONET 105 /* Machine is not on the network */
+#define ENOLINK 106 /* Link has been severed */
+#define EADV 107 /* Advertise error */
+#define ESRMNT 108 /* Srmount error */
+#define ECOMM 109 /* Communication error on send */
+#define EMULTIHOP 110 /* Multihop attempted */
+#define EDOTDOT 111 /* RFS specific error */
+#define EOVERFLOW 112 /* Value too large for defined data type */
+#define ENOTUNIQ 113 /* Name not unique on network */
+#define EBADFD 114 /* File descriptor in bad state */
+#define EREMCHG 115 /* Remote address changed */
+
+#define EUCLEAN 117 /* Structure needs cleaning */
+#define ENOTNAM 118 /* Not a XENIX named type file */
+#define ENAVAIL 119 /* No XENIX semaphores available */
+#define EISNAM 120 /* Is a named type file */
+#define EREMOTEIO 121 /* Remote I/O error */
+
+#define ELIBACC 122 /* Can not access a needed shared library */
+#define ELIBBAD 123 /* Accessing a corrupted shared library */
+#define ELIBSCN 124 /* .lib section in a.out corrupted */
+#define ELIBMAX 125 /* Attempting to link in too many shared libraries */
+#define ELIBEXEC 126 /* Cannot exec a shared library directly */
+#define ERESTART 127 /* Interrupted system call should be restarted */
+#define ESTRPIPE 128 /* Streams pipe error */
+
+#define ENOMEDIUM 129 /* No medium found */
+#define EMEDIUMTYPE 130 /* Wrong medium type */
+#define ECANCELED 131 /* Operation Cancelled */
+#define ENOKEY 132 /* Required key not available */
+#define EKEYEXPIRED 133 /* Key has expired */
+#define EKEYREVOKED 134 /* Key has been revoked */
+#define EKEYREJECTED 135 /* Key was rejected by service */
+
+/* for robust mutexes */
+#define EOWNERDEAD 136 /* Owner died */
+#define ENOTRECOVERABLE 137 /* State not recoverable */
+
+#define ERFKILL 138 /* Operation not possible due to RF-kill */
+
+#define EHWPOISON 139 /* Memory page has hardware error */
+
+#endif
diff --git a/tools/arch/mips/include/asm/errno.h b/tools/arch/mips/include/asm/errno.h
new file mode 100644
index 000000000000..21d91cdfe3c9
--- /dev/null
+++ b/tools/arch/mips/include/asm/errno.h
@@ -0,0 +1,17 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1999, 2001, 2002 by Ralf Baechle
+ */
+#ifndef _ASM_ERRNO_H
+#define _ASM_ERRNO_H
+
+#include <uapi/asm/errno.h>
+
+
+/* The biggest error number defined here or in <linux/errno.h>. */
+#define EMAXERRNO 1133
+
+#endif /* _ASM_ERRNO_H */
diff --git a/tools/arch/mips/include/uapi/asm/errno.h b/tools/arch/mips/include/uapi/asm/errno.h
new file mode 100644
index 000000000000..2fb714e2d6d8
--- /dev/null
+++ b/tools/arch/mips/include/uapi/asm/errno.h
@@ -0,0 +1,130 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1999, 2001, 2002 by Ralf Baechle
+ */
+#ifndef _UAPI_ASM_ERRNO_H
+#define _UAPI_ASM_ERRNO_H
+
+/*
+ * These error numbers are intended to be MIPS ABI compatible
+ */
+
+#include <asm-generic/errno-base.h>
+
+#define ENOMSG 35 /* No message of desired type */
+#define EIDRM 36 /* Identifier removed */
+#define ECHRNG 37 /* Channel number out of range */
+#define EL2NSYNC 38 /* Level 2 not synchronized */
+#define EL3HLT 39 /* Level 3 halted */
+#define EL3RST 40 /* Level 3 reset */
+#define ELNRNG 41 /* Link number out of range */
+#define EUNATCH 42 /* Protocol driver not attached */
+#define ENOCSI 43 /* No CSI structure available */
+#define EL2HLT 44 /* Level 2 halted */
+#define EDEADLK 45 /* Resource deadlock would occur */
+#define ENOLCK 46 /* No record locks available */
+#define EBADE 50 /* Invalid exchange */
+#define EBADR 51 /* Invalid request descriptor */
+#define EXFULL 52 /* Exchange full */
+#define ENOANO 53 /* No anode */
+#define EBADRQC 54 /* Invalid request code */
+#define EBADSLT 55 /* Invalid slot */
+#define EDEADLOCK 56 /* File locking deadlock error */
+#define EBFONT 59 /* Bad font file format */
+#define ENOSTR 60 /* Device not a stream */
+#define ENODATA 61 /* No data available */
+#define ETIME 62 /* Timer expired */
+#define ENOSR 63 /* Out of streams resources */
+#define ENONET 64 /* Machine is not on the network */
+#define ENOPKG 65 /* Package not installed */
+#define EREMOTE 66 /* Object is remote */
+#define ENOLINK 67 /* Link has been severed */
+#define EADV 68 /* Advertise error */
+#define ESRMNT 69 /* Srmount error */
+#define ECOMM 70 /* Communication error on send */
+#define EPROTO 71 /* Protocol error */
+#define EDOTDOT 73 /* RFS specific error */
+#define EMULTIHOP 74 /* Multihop attempted */
+#define EBADMSG 77 /* Not a data message */
+#define ENAMETOOLONG 78 /* File name too long */
+#define EOVERFLOW 79 /* Value too large for defined data type */
+#define ENOTUNIQ 80 /* Name not unique on network */
+#define EBADFD 81 /* File descriptor in bad state */
+#define EREMCHG 82 /* Remote address changed */
+#define ELIBACC 83 /* Can not access a needed shared library */
+#define ELIBBAD 84 /* Accessing a corrupted shared library */
+#define ELIBSCN 85 /* .lib section in a.out corrupted */
+#define ELIBMAX 86 /* Attempting to link in too many shared libraries */
+#define ELIBEXEC 87 /* Cannot exec a shared library directly */
+#define EILSEQ 88 /* Illegal byte sequence */
+#define ENOSYS 89 /* Function not implemented */
+#define ELOOP 90 /* Too many symbolic links encountered */
+#define ERESTART 91 /* Interrupted system call should be restarted */
+#define ESTRPIPE 92 /* Streams pipe error */
+#define ENOTEMPTY 93 /* Directory not empty */
+#define EUSERS 94 /* Too many users */
+#define ENOTSOCK 95 /* Socket operation on non-socket */
+#define EDESTADDRREQ 96 /* Destination address required */
+#define EMSGSIZE 97 /* Message too long */
+#define EPROTOTYPE 98 /* Protocol wrong type for socket */
+#define ENOPROTOOPT 99 /* Protocol not available */
+#define EPROTONOSUPPORT 120 /* Protocol not supported */
+#define ESOCKTNOSUPPORT 121 /* Socket type not supported */
+#define EOPNOTSUPP 122 /* Operation not supported on transport endpoint */
+#define EPFNOSUPPORT 123 /* Protocol family not supported */
+#define EAFNOSUPPORT 124 /* Address family not supported by protocol */
+#define EADDRINUSE 125 /* Address already in use */
+#define EADDRNOTAVAIL 126 /* Cannot assign requested address */
+#define ENETDOWN 127 /* Network is down */
+#define ENETUNREACH 128 /* Network is unreachable */
+#define ENETRESET 129 /* Network dropped connection because of reset */
+#define ECONNABORTED 130 /* Software caused connection abort */
+#define ECONNRESET 131 /* Connection reset by peer */
+#define ENOBUFS 132 /* No buffer space available */
+#define EISCONN 133 /* Transport endpoint is already connected */
+#define ENOTCONN 134 /* Transport endpoint is not connected */
+#define EUCLEAN 135 /* Structure needs cleaning */
+#define ENOTNAM 137 /* Not a XENIX named type file */
+#define ENAVAIL 138 /* No XENIX semaphores available */
+#define EISNAM 139 /* Is a named type file */
+#define EREMOTEIO 140 /* Remote I/O error */
+#define EINIT 141 /* Reserved */
+#define EREMDEV 142 /* Error 142 */
+#define ESHUTDOWN 143 /* Cannot send after transport endpoint shutdown */
+#define ETOOMANYREFS 144 /* Too many references: cannot splice */
+#define ETIMEDOUT 145 /* Connection timed out */
+#define ECONNREFUSED 146 /* Connection refused */
+#define EHOSTDOWN 147 /* Host is down */
+#define EHOSTUNREACH 148 /* No route to host */
+#define EWOULDBLOCK EAGAIN /* Operation would block */
+#define EALREADY 149 /* Operation already in progress */
+#define EINPROGRESS 150 /* Operation now in progress */
+#define ESTALE 151 /* Stale file handle */
+#define ECANCELED 158 /* AIO operation canceled */
+
+/*
+ * These error are Linux extensions.
+ */
+#define ENOMEDIUM 159 /* No medium found */
+#define EMEDIUMTYPE 160 /* Wrong medium type */
+#define ENOKEY 161 /* Required key not available */
+#define EKEYEXPIRED 162 /* Key has expired */
+#define EKEYREVOKED 163 /* Key has been revoked */
+#define EKEYREJECTED 164 /* Key was rejected by service */
+
+/* for robust mutexes */
+#define EOWNERDEAD 165 /* Owner died */
+#define ENOTRECOVERABLE 166 /* State not recoverable */
+
+#define ERFKILL 167 /* Operation not possible due to RF-kill */
+
+#define EHWPOISON 168 /* Memory page has hardware error */
+
+#define EDQUOT 1133 /* Quota exceeded */
+
+
+#endif /* _UAPI_ASM_ERRNO_H */
diff --git a/tools/arch/parisc/include/uapi/asm/errno.h b/tools/arch/parisc/include/uapi/asm/errno.h
new file mode 100644
index 000000000000..fc0df353ff0d
--- /dev/null
+++ b/tools/arch/parisc/include/uapi/asm/errno.h
@@ -0,0 +1,128 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _PARISC_ERRNO_H
+#define _PARISC_ERRNO_H
+
+#include <asm-generic/errno-base.h>
+
+#define ENOMSG 35 /* No message of desired type */
+#define EIDRM 36 /* Identifier removed */
+#define ECHRNG 37 /* Channel number out of range */
+#define EL2NSYNC 38 /* Level 2 not synchronized */
+#define EL3HLT 39 /* Level 3 halted */
+#define EL3RST 40 /* Level 3 reset */
+#define ELNRNG 41 /* Link number out of range */
+#define EUNATCH 42 /* Protocol driver not attached */
+#define ENOCSI 43 /* No CSI structure available */
+#define EL2HLT 44 /* Level 2 halted */
+#define EDEADLK 45 /* Resource deadlock would occur */
+#define EDEADLOCK EDEADLK
+#define ENOLCK 46 /* No record locks available */
+#define EILSEQ 47 /* Illegal byte sequence */
+
+#define ENONET 50 /* Machine is not on the network */
+#define ENODATA 51 /* No data available */
+#define ETIME 52 /* Timer expired */
+#define ENOSR 53 /* Out of streams resources */
+#define ENOSTR 54 /* Device not a stream */
+#define ENOPKG 55 /* Package not installed */
+
+#define ENOLINK 57 /* Link has been severed */
+#define EADV 58 /* Advertise error */
+#define ESRMNT 59 /* Srmount error */
+#define ECOMM 60 /* Communication error on send */
+#define EPROTO 61 /* Protocol error */
+
+#define EMULTIHOP 64 /* Multihop attempted */
+
+#define EDOTDOT 66 /* RFS specific error */
+#define EBADMSG 67 /* Not a data message */
+#define EUSERS 68 /* Too many users */
+#define EDQUOT 69 /* Quota exceeded */
+#define ESTALE 70 /* Stale file handle */
+#define EREMOTE 71 /* Object is remote */
+#define EOVERFLOW 72 /* Value too large for defined data type */
+
+/* these errnos are defined by Linux but not HPUX. */
+
+#define EBADE 160 /* Invalid exchange */
+#define EBADR 161 /* Invalid request descriptor */
+#define EXFULL 162 /* Exchange full */
+#define ENOANO 163 /* No anode */
+#define EBADRQC 164 /* Invalid request code */
+#define EBADSLT 165 /* Invalid slot */
+#define EBFONT 166 /* Bad font file format */
+#define ENOTUNIQ 167 /* Name not unique on network */
+#define EBADFD 168 /* File descriptor in bad state */
+#define EREMCHG 169 /* Remote address changed */
+#define ELIBACC 170 /* Can not access a needed shared library */
+#define ELIBBAD 171 /* Accessing a corrupted shared library */
+#define ELIBSCN 172 /* .lib section in a.out corrupted */
+#define ELIBMAX 173 /* Attempting to link in too many shared libraries */
+#define ELIBEXEC 174 /* Cannot exec a shared library directly */
+#define ERESTART 175 /* Interrupted system call should be restarted */
+#define ESTRPIPE 176 /* Streams pipe error */
+#define EUCLEAN 177 /* Structure needs cleaning */
+#define ENOTNAM 178 /* Not a XENIX named type file */
+#define ENAVAIL 179 /* No XENIX semaphores available */
+#define EISNAM 180 /* Is a named type file */
+#define EREMOTEIO 181 /* Remote I/O error */
+#define ENOMEDIUM 182 /* No medium found */
+#define EMEDIUMTYPE 183 /* Wrong medium type */
+#define ENOKEY 184 /* Required key not available */
+#define EKEYEXPIRED 185 /* Key has expired */
+#define EKEYREVOKED 186 /* Key has been revoked */
+#define EKEYREJECTED 187 /* Key was rejected by service */
+
+/* We now return you to your regularly scheduled HPUX. */
+
+#define ENOSYM 215 /* symbol does not exist in executable */
+#define ENOTSOCK 216 /* Socket operation on non-socket */
+#define EDESTADDRREQ 217 /* Destination address required */
+#define EMSGSIZE 218 /* Message too long */
+#define EPROTOTYPE 219 /* Protocol wrong type for socket */
+#define ENOPROTOOPT 220 /* Protocol not available */
+#define EPROTONOSUPPORT 221 /* Protocol not supported */
+#define ESOCKTNOSUPPORT 222 /* Socket type not supported */
+#define EOPNOTSUPP 223 /* Operation not supported on transport endpoint */
+#define EPFNOSUPPORT 224 /* Protocol family not supported */
+#define EAFNOSUPPORT 225 /* Address family not supported by protocol */
+#define EADDRINUSE 226 /* Address already in use */
+#define EADDRNOTAVAIL 227 /* Cannot assign requested address */
+#define ENETDOWN 228 /* Network is down */
+#define ENETUNREACH 229 /* Network is unreachable */
+#define ENETRESET 230 /* Network dropped connection because of reset */
+#define ECONNABORTED 231 /* Software caused connection abort */
+#define ECONNRESET 232 /* Connection reset by peer */
+#define ENOBUFS 233 /* No buffer space available */
+#define EISCONN 234 /* Transport endpoint is already connected */
+#define ENOTCONN 235 /* Transport endpoint is not connected */
+#define ESHUTDOWN 236 /* Cannot send after transport endpoint shutdown */
+#define ETOOMANYREFS 237 /* Too many references: cannot splice */
+#define ETIMEDOUT 238 /* Connection timed out */
+#define ECONNREFUSED 239 /* Connection refused */
+#define EREFUSED ECONNREFUSED /* for HP's NFS apparently */
+#define EREMOTERELEASE 240 /* Remote peer released connection */
+#define EHOSTDOWN 241 /* Host is down */
+#define EHOSTUNREACH 242 /* No route to host */
+
+#define EALREADY 244 /* Operation already in progress */
+#define EINPROGRESS 245 /* Operation now in progress */
+#define EWOULDBLOCK EAGAIN /* Operation would block (Not HPUX compliant) */
+#define ENOTEMPTY 247 /* Directory not empty */
+#define ENAMETOOLONG 248 /* File name too long */
+#define ELOOP 249 /* Too many symbolic links encountered */
+#define ENOSYS 251 /* Function not implemented */
+
+#define ENOTSUP 252 /* Function not implemented (POSIX.4 / HPUX) */
+#define ECANCELLED 253 /* aio request was canceled before complete (POSIX.4 / HPUX) */
+#define ECANCELED ECANCELLED /* SuSv3 and Solaris wants one 'L' */
+
+/* for robust mutexes */
+#define EOWNERDEAD 254 /* Owner died */
+#define ENOTRECOVERABLE 255 /* State not recoverable */
+
+#define ERFKILL 256 /* Operation not possible due to RF-kill */
+
+#define EHWPOISON 257 /* Memory page has hardware error */
+
+#endif
diff --git a/tools/arch/powerpc/include/uapi/asm/errno.h b/tools/arch/powerpc/include/uapi/asm/errno.h
new file mode 100644
index 000000000000..cc79856896a1
--- /dev/null
+++ b/tools/arch/powerpc/include/uapi/asm/errno.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _ASM_POWERPC_ERRNO_H
+#define _ASM_POWERPC_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#undef EDEADLOCK
+#define EDEADLOCK 58 /* File locking deadlock error */
+
+#endif /* _ASM_POWERPC_ERRNO_H */
diff --git a/tools/arch/sparc/include/uapi/asm/errno.h b/tools/arch/sparc/include/uapi/asm/errno.h
new file mode 100644
index 000000000000..81a732b902ee
--- /dev/null
+++ b/tools/arch/sparc/include/uapi/asm/errno.h
@@ -0,0 +1,118 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _SPARC_ERRNO_H
+#define _SPARC_ERRNO_H
+
+/* These match the SunOS error numbering scheme. */
+
+#include <asm-generic/errno-base.h>
+
+#define EWOULDBLOCK EAGAIN /* Operation would block */
+#define EINPROGRESS 36 /* Operation now in progress */
+#define EALREADY 37 /* Operation already in progress */
+#define ENOTSOCK 38 /* Socket operation on non-socket */
+#define EDESTADDRREQ 39 /* Destination address required */
+#define EMSGSIZE 40 /* Message too long */
+#define EPROTOTYPE 41 /* Protocol wrong type for socket */
+#define ENOPROTOOPT 42 /* Protocol not available */
+#define EPROTONOSUPPORT 43 /* Protocol not supported */
+#define ESOCKTNOSUPPORT 44 /* Socket type not supported */
+#define EOPNOTSUPP 45 /* Op not supported on transport endpoint */
+#define EPFNOSUPPORT 46 /* Protocol family not supported */
+#define EAFNOSUPPORT 47 /* Address family not supported by protocol */
+#define EADDRINUSE 48 /* Address already in use */
+#define EADDRNOTAVAIL 49 /* Cannot assign requested address */
+#define ENETDOWN 50 /* Network is down */
+#define ENETUNREACH 51 /* Network is unreachable */
+#define ENETRESET 52 /* Net dropped connection because of reset */
+#define ECONNABORTED 53 /* Software caused connection abort */
+#define ECONNRESET 54 /* Connection reset by peer */
+#define ENOBUFS 55 /* No buffer space available */
+#define EISCONN 56 /* Transport endpoint is already connected */
+#define ENOTCONN 57 /* Transport endpoint is not connected */
+#define ESHUTDOWN 58 /* No send after transport endpoint shutdown */
+#define ETOOMANYREFS 59 /* Too many references: cannot splice */
+#define ETIMEDOUT 60 /* Connection timed out */
+#define ECONNREFUSED 61 /* Connection refused */
+#define ELOOP 62 /* Too many symbolic links encountered */
+#define ENAMETOOLONG 63 /* File name too long */
+#define EHOSTDOWN 64 /* Host is down */
+#define EHOSTUNREACH 65 /* No route to host */
+#define ENOTEMPTY 66 /* Directory not empty */
+#define EPROCLIM 67 /* SUNOS: Too many processes */
+#define EUSERS 68 /* Too many users */
+#define EDQUOT 69 /* Quota exceeded */
+#define ESTALE 70 /* Stale file handle */
+#define EREMOTE 71 /* Object is remote */
+#define ENOSTR 72 /* Device not a stream */
+#define ETIME 73 /* Timer expired */
+#define ENOSR 74 /* Out of streams resources */
+#define ENOMSG 75 /* No message of desired type */
+#define EBADMSG 76 /* Not a data message */
+#define EIDRM 77 /* Identifier removed */
+#define EDEADLK 78 /* Resource deadlock would occur */
+#define ENOLCK 79 /* No record locks available */
+#define ENONET 80 /* Machine is not on the network */
+#define ERREMOTE 81 /* SunOS: Too many lvls of remote in path */
+#define ENOLINK 82 /* Link has been severed */
+#define EADV 83 /* Advertise error */
+#define ESRMNT 84 /* Srmount error */
+#define ECOMM 85 /* Communication error on send */
+#define EPROTO 86 /* Protocol error */
+#define EMULTIHOP 87 /* Multihop attempted */
+#define EDOTDOT 88 /* RFS specific error */
+#define EREMCHG 89 /* Remote address changed */
+#define ENOSYS 90 /* Function not implemented */
+
+/* The rest have no SunOS equivalent. */
+#define ESTRPIPE 91 /* Streams pipe error */
+#define EOVERFLOW 92 /* Value too large for defined data type */
+#define EBADFD 93 /* File descriptor in bad state */
+#define ECHRNG 94 /* Channel number out of range */
+#define EL2NSYNC 95 /* Level 2 not synchronized */
+#define EL3HLT 96 /* Level 3 halted */
+#define EL3RST 97 /* Level 3 reset */
+#define ELNRNG 98 /* Link number out of range */
+#define EUNATCH 99 /* Protocol driver not attached */
+#define ENOCSI 100 /* No CSI structure available */
+#define EL2HLT 101 /* Level 2 halted */
+#define EBADE 102 /* Invalid exchange */
+#define EBADR 103 /* Invalid request descriptor */
+#define EXFULL 104 /* Exchange full */
+#define ENOANO 105 /* No anode */
+#define EBADRQC 106 /* Invalid request code */
+#define EBADSLT 107 /* Invalid slot */
+#define EDEADLOCK 108 /* File locking deadlock error */
+#define EBFONT 109 /* Bad font file format */
+#define ELIBEXEC 110 /* Cannot exec a shared library directly */
+#define ENODATA 111 /* No data available */
+#define ELIBBAD 112 /* Accessing a corrupted shared library */
+#define ENOPKG 113 /* Package not installed */
+#define ELIBACC 114 /* Can not access a needed shared library */
+#define ENOTUNIQ 115 /* Name not unique on network */
+#define ERESTART 116 /* Interrupted syscall should be restarted */
+#define EUCLEAN 117 /* Structure needs cleaning */
+#define ENOTNAM 118 /* Not a XENIX named type file */
+#define ENAVAIL 119 /* No XENIX semaphores available */
+#define EISNAM 120 /* Is a named type file */
+#define EREMOTEIO 121 /* Remote I/O error */
+#define EILSEQ 122 /* Illegal byte sequence */
+#define ELIBMAX 123 /* Atmpt to link in too many shared libs */
+#define ELIBSCN 124 /* .lib section in a.out corrupted */
+
+#define ENOMEDIUM 125 /* No medium found */
+#define EMEDIUMTYPE 126 /* Wrong medium type */
+#define ECANCELED 127 /* Operation Cancelled */
+#define ENOKEY 128 /* Required key not available */
+#define EKEYEXPIRED 129 /* Key has expired */
+#define EKEYREVOKED 130 /* Key has been revoked */
+#define EKEYREJECTED 131 /* Key was rejected by service */
+
+/* for robust mutexes */
+#define EOWNERDEAD 132 /* Owner died */
+#define ENOTRECOVERABLE 133 /* State not recoverable */
+
+#define ERFKILL 134 /* Operation not possible due to RF-kill */
+
+#define EHWPOISON 135 /* Memory page has hardware error */
+
+#endif
diff --git a/tools/arch/x86/include/uapi/asm/errno.h b/tools/arch/x86/include/uapi/asm/errno.h
new file mode 100644
index 000000000000..4c82b503d92f
--- /dev/null
+++ b/tools/arch/x86/include/uapi/asm/errno.h
@@ -0,0 +1 @@
+#include <asm-generic/errno.h>
--git a/tools/perf/check-headers.sh b/tools/perf/check-headers.sh
index f81ca508700c..83a65d305298 100755
--- a/tools/perf/check-headers.sh
+++ b/tools/perf/check-headers.sh
@@ -36,6 +36,13 @@ arch/s390/include/uapi/asm/sie.h
arch/s390/include/uapi/asm/unistd.h
arch/arm/include/uapi/asm/kvm.h
arch/arm64/include/uapi/asm/kvm.h
+arch/alpha/include/uapi/asm/errno.h
+arch/mips/include/asm/errno.h
+arch/mips/include/uapi/asm/errno.h
+arch/parisc/include/uapi/asm/errno.h
+arch/powerpc/include/uapi/asm/errno.h
+arch/sparc/include/uapi/asm/errno.h
+arch/x86/include/uapi/asm/errno.h
include/asm-generic/bitops/arch_hweight.h
include/asm-generic/bitops/const_hweight.h
include/asm-generic/bitops/__fls.h
--
2.14.3
next prev parent reply other threads:[~2018-01-23 13:12 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-23 13:12 [GIT PULL 00/43] perf/core improvements and changes Arnaldo Carvalho de Melo
2018-01-23 13:12 ` Arnaldo Carvalho de Melo
2018-01-23 13:12 ` Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 01/43] perf intel-pt/bts: Do not swap when synthesizing samples Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 02/43] perf evsel: Ensure reserved member of PERF_SAMPLE_CPU is zero in perf_event__synthesize_sample() Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 03/43] perf tools: Get rid of unused 'swapped' parameter from perf_event__synthesize_sample() Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 04/43] perf tools: Use ui__error() for reporting --fields errors Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 05/43] perf bpf: Don't warn about unavailability of builtin clang, just fallback Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 06/43] perf tools: Move conditional O_CLOEXEC to util.h Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 07/43] perf symbols: Using O_CLOEXEC in do_open Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 08/43] perf report: Fix regression when decoding intel_pt traces Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 09/43] perf build: Display EXTRA features for VF=1 build Arnaldo Carvalho de Melo
2018-01-23 13:12 ` Arnaldo Carvalho de Melo [this message]
2018-01-23 13:12 ` [PATCH 11/43] tools include asm-generic: Grab errno.h and errno-base.h Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 12/43] perf util: Introduce architecture specific errno/name mapping Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 13/43] perf trace: Obtain errno strings by using arch_syscalls__strerrno() Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 14/43] perf trace: Remove audit-libs dependency if syscall tables are present Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 15/43] perf vendor events intel: Update Broadwell events to V22 Arnaldo Carvalho de Melo
2018-01-23 13:12 ` Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 16/43] perf vendor events intel: Update BroadwellX events to V13 Arnaldo Carvalho de Melo
2018-01-23 13:12 ` Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 17/43] perf vendor events intel: Update Goldmont events to V12 Arnaldo Carvalho de Melo
2018-01-23 13:12 ` Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 18/43] perf vendor events intel: Update Haswell events to V27 Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 19/43] perf vendor events intel: Update HaswellX events to V19 Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 20/43] perf vendor events intel: Update IvyBridge events to V20 Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 21/43] perf vendor events intel: Update IvyTown " Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 22/43] perf vendor events intel: Update Silvermont events to V14 Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 23/43] perf vendor events intel: Update Skylake events to V36 Arnaldo Carvalho de Melo
2018-01-23 13:12 ` Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 24/43] perf vendor events intel: Update SkylakeX events to V1.06 Arnaldo Carvalho de Melo
2018-01-23 13:12 ` Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 25/43] perf vendor events intel: Update BroadwellDE events to V7 Arnaldo Carvalho de Melo
2018-01-23 13:12 ` Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 26/43] perf vendor events intel: Update IvyBridge files to V20 Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 27/43] perf vendor events intel: Update IvyTown " Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 28/43] perf tools: Integrating the CoreSight decoding library Arnaldo Carvalho de Melo
2018-01-23 13:12 ` Arnaldo Carvalho de Melo
2018-01-23 13:12 ` Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 29/43] perf tools: Add initial entry point for decoder CoreSight traces Arnaldo Carvalho de Melo
2018-01-23 13:12 ` Arnaldo Carvalho de Melo
2018-01-23 13:12 ` Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 30/43] perf tools: Add processing of coresight metadata Arnaldo Carvalho de Melo
2018-01-23 13:12 ` Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 31/43] perf tools: Add decoder mechanic to support dumping trace data Arnaldo Carvalho de Melo
2018-01-23 13:12 ` Arnaldo Carvalho de Melo
2018-01-23 13:12 ` Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 32/43] perf tools: Add support for decoding CoreSight " Arnaldo Carvalho de Melo
2018-01-23 13:12 ` Arnaldo Carvalho de Melo
2018-01-23 13:12 ` Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 33/43] perf tools: Add functionality to communicate with the openCSD decoder Arnaldo Carvalho de Melo
2018-01-23 13:12 ` Arnaldo Carvalho de Melo
2018-01-23 13:12 ` Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 34/43] pert tools: Add queue management functionality Arnaldo Carvalho de Melo
2018-01-23 13:12 ` Arnaldo Carvalho de Melo
2018-01-23 13:12 ` Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 35/43] perf tools: Add full support for CoreSight trace decoding Arnaldo Carvalho de Melo
2018-01-23 13:12 ` Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 36/43] perf tools: Add mechanic to synthesise CoreSight trace packets Arnaldo Carvalho de Melo
2018-01-23 13:12 ` Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 37/43] MAINTAINERS: Adding entry for CoreSight trace decoding Arnaldo Carvalho de Melo
2018-01-23 13:12 ` Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 38/43] perf bpf: Remove misplaced __maybe_unused attribute Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 39/43] perf trace: Add --print-sample Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 40/43] perf trace: Do not print from time delta for interrupted syscall lines Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 41/43] perf trace beauty futex: Beautify FUTEX_BITSET_MATCH_ANY Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 42/43] perf evlist: Remove fcntl.h from evlist.h Arnaldo Carvalho de Melo
2018-01-23 13:12 ` [PATCH 43/43] perf trace beauty flock: Move to separate object file Arnaldo Carvalho de Melo
2018-01-24 11:15 ` [GIT PULL 00/43] perf/core improvements and changes Ingo Molnar
2018-01-24 11:15 ` Ingo Molnar
2018-01-24 11:15 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180123131251.28197-11-acme@kernel.org \
--to=acme@kernel.org \
--cc=acme@redhat.com \
--cc=brueckner@linux.vnet.ibm.com \
--cc=jolsa@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-perf-users@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=mpetlan@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.