All of lore.kernel.org
 help / color / mirror / Atom feed
From: codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
To: maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
	lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org,
	be17068-p0aYb1w59bq9tCD/VL7h6Q@public.gmane.org,
	Marcus Cooper
	<codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH 2/3] ASoC: sun4i-i2s: Do not divide clocks when slave
Date: Wed, 24 Jan 2018 15:11:00 +0100	[thread overview]
Message-ID: <20180124141101.12867-3-codekipper@gmail.com> (raw)
In-Reply-To: <20180124141101.12867-1-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

There is no need to set the clock and calculate the division of
the audio pll for the bclk and sync signals when they are not
required.

Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 sound/soc/sunxi/sun4i-i2s.c | 116 ++++++++++++++++++++++++--------------------
 1 file changed, 64 insertions(+), 52 deletions(-)

diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index d7a9141514cf..626679057d0f 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -195,6 +195,8 @@ struct sun4i_i2s {
 
 	const struct sun4i_i2s_quirks	*variant;
 
+	bool bit_clk_master;
+
 	unsigned int	tdm_slots;
 	unsigned int	slot_width;
 };
@@ -282,67 +284,73 @@ static int sun4i_i2s_set_clk_rate(struct snd_soc_dai *dai,
 	int bclk_div, mclk_div;
 	int ret;
 
-	switch (rate) {
-	case 176400:
-	case 88200:
-	case 44100:
-	case 22050:
-	case 11025:
-		clk_rate = 22579200;
-		break;
+	if (i2s->bit_clk_master) {
+		switch (rate) {
+		case 176400:
+		case 88200:
+		case 44100:
+		case 22050:
+		case 11025:
+			clk_rate = 22579200;
+			break;
 
-	case 192000:
-	case 128000:
-	case 96000:
-	case 64000:
-	case 48000:
-	case 32000:
-	case 24000:
-	case 16000:
-	case 12000:
-	case 8000:
-		clk_rate = 24576000;
-		break;
+		case 192000:
+		case 128000:
+		case 96000:
+		case 64000:
+		case 48000:
+		case 32000:
+		case 24000:
+		case 16000:
+		case 12000:
+		case 8000:
+			clk_rate = 24576000;
+			break;
 
-	default:
-		dev_err(dai->dev, "Unsupported sample rate: %u\n", rate);
-		return -EINVAL;
-	}
+		default:
+			dev_err(dai->dev, "Unsupported sample rate: %u\n", rate);
+			return -EINVAL;
+		}
 
-	ret = clk_set_rate(i2s->mod_clk, clk_rate);
-	if (ret)
-		return ret;
+		ret = clk_set_rate(i2s->mod_clk, clk_rate);
+		if (ret) {
+			dev_err(dai->dev, "Unable to set clock\n");
+			return ret;
+		}
 
-	oversample_rate = i2s->mclk_freq / rate;
-	if (!sun4i_i2s_oversample_is_valid(oversample_rate)) {
-		dev_err(dai->dev, "Unsupported oversample rate: %d\n",
-			oversample_rate);
-		return -EINVAL;
-	}
+		oversample_rate = i2s->mclk_freq / rate;
+		if (!sun4i_i2s_oversample_is_valid(oversample_rate)) {
+			dev_err(dai->dev, "Unsupported oversample rate: %d\n",
+				oversample_rate);
+			return -EINVAL;
+		}
 
-	bclk_div = sun4i_i2s_get_bclk_div(i2s, oversample_rate,
-					  word_size);
-	if (bclk_div < 0) {
-		dev_err(dai->dev, "Unsupported BCLK divider: %d\n", bclk_div);
-		return -EINVAL;
-	}
+		bclk_div = sun4i_i2s_get_bclk_div(i2s, oversample_rate,
+						  word_size);
+		if (bclk_div < 0) {
+			dev_err(dai->dev, "Unsupported BCLK divider: %d\n",
+				bclk_div);
+			return -EINVAL;
+		}
 
-	mclk_div = sun4i_i2s_get_mclk_div(i2s, oversample_rate,
-					  clk_rate, rate);
-	if (mclk_div < 0) {
-		dev_err(dai->dev, "Unsupported MCLK divider: %d\n", mclk_div);
-		return -EINVAL;
-	}
+		mclk_div = sun4i_i2s_get_mclk_div(i2s, oversample_rate,
+						  clk_rate, rate);
+		if (mclk_div < 0) {
+			dev_err(dai->dev, "Unsupported MCLK divider: %d\n",
+				mclk_div);
+			return -EINVAL;
+		}
 
-	/* Adjust the clock division values if needed */
-	bclk_div += i2s->variant->bclk_offset;
-	mclk_div += i2s->variant->mclk_offset;
+		/* Adjust the clock division values if needed */
+		bclk_div += i2s->variant->bclk_offset;
+		mclk_div += i2s->variant->mclk_offset;
 
-	regmap_write(i2s->regmap, SUN4I_I2S_CLK_DIV_REG,
-		     SUN4I_I2S_CLK_DIV_BCLK(bclk_div) |
-		     SUN4I_I2S_CLK_DIV_MCLK(mclk_div));
+		regmap_write(i2s->regmap, SUN4I_I2S_CLK_DIV_REG,
+			     SUN4I_I2S_CLK_DIV_BCLK(bclk_div) |
+			     SUN4I_I2S_CLK_DIV_MCLK(mclk_div));
 
-	regmap_field_write(i2s->field_clkdiv_mclk_en, 1);
+		regmap_field_write(i2s->field_clkdiv_mclk_en, 1);
+	}
 
 	/* Set sync period */
 	if (i2s->variant->has_fmt_set_lrck_period)
@@ -501,10 +509,12 @@ static int sun4i_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 		case SND_SOC_DAIFMT_CBS_CFS:
 			/* BCLK and LRCLK master */
 			val = SUN4I_I2S_CTRL_MODE_MASTER;
+			i2s->bit_clk_master = true;
 			break;
 		case SND_SOC_DAIFMT_CBM_CFM:
 			/* BCLK and LRCLK slave */
 			val = SUN4I_I2S_CTRL_MODE_SLAVE;
+			i2s->bit_clk_master = false;
 			break;
 		default:
 			dev_err(dai->dev, "Unsupported slave setting: %d\n",
@@ -525,10 +535,12 @@ static int sun4i_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 			/* BCLK and LRCLK master */
 			val = SUN8I_I2S_CTRL_BCLK_OUT |
 				SUN8I_I2S_CTRL_LRCK_OUT;
+			i2s->bit_clk_master = true;
 			break;
 		case SND_SOC_DAIFMT_CBM_CFM:
 			/* BCLK and LRCLK slave */
 			val = 0;
+			i2s->bit_clk_master = false;
 			break;
 		default:
 			dev_err(dai->dev, "Unsupported slave setting: %d\n",
-- 
2.16.0

WARNING: multiple messages have this Message-ID (diff)
From: codekipper@gmail.com (codekipper at gmail.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] ASoC: sun4i-i2s: Do not divide clocks when slave
Date: Wed, 24 Jan 2018 15:11:00 +0100	[thread overview]
Message-ID: <20180124141101.12867-3-codekipper@gmail.com> (raw)
In-Reply-To: <20180124141101.12867-1-codekipper@gmail.com>

From: Marcus Cooper <codekipper@gmail.com>

There is no need to set the clock and calculate the division of
the audio pll for the bclk and sync signals when they are not
required.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
 sound/soc/sunxi/sun4i-i2s.c | 116 ++++++++++++++++++++++++--------------------
 1 file changed, 64 insertions(+), 52 deletions(-)

diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index d7a9141514cf..626679057d0f 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -195,6 +195,8 @@ struct sun4i_i2s {
 
 	const struct sun4i_i2s_quirks	*variant;
 
+	bool bit_clk_master;
+
 	unsigned int	tdm_slots;
 	unsigned int	slot_width;
 };
@@ -282,67 +284,73 @@ static int sun4i_i2s_set_clk_rate(struct snd_soc_dai *dai,
 	int bclk_div, mclk_div;
 	int ret;
 
-	switch (rate) {
-	case 176400:
-	case 88200:
-	case 44100:
-	case 22050:
-	case 11025:
-		clk_rate = 22579200;
-		break;
+	if (i2s->bit_clk_master) {
+		switch (rate) {
+		case 176400:
+		case 88200:
+		case 44100:
+		case 22050:
+		case 11025:
+			clk_rate = 22579200;
+			break;
 
-	case 192000:
-	case 128000:
-	case 96000:
-	case 64000:
-	case 48000:
-	case 32000:
-	case 24000:
-	case 16000:
-	case 12000:
-	case 8000:
-		clk_rate = 24576000;
-		break;
+		case 192000:
+		case 128000:
+		case 96000:
+		case 64000:
+		case 48000:
+		case 32000:
+		case 24000:
+		case 16000:
+		case 12000:
+		case 8000:
+			clk_rate = 24576000;
+			break;
 
-	default:
-		dev_err(dai->dev, "Unsupported sample rate: %u\n", rate);
-		return -EINVAL;
-	}
+		default:
+			dev_err(dai->dev, "Unsupported sample rate: %u\n", rate);
+			return -EINVAL;
+		}
 
-	ret = clk_set_rate(i2s->mod_clk, clk_rate);
-	if (ret)
-		return ret;
+		ret = clk_set_rate(i2s->mod_clk, clk_rate);
+		if (ret) {
+			dev_err(dai->dev, "Unable to set clock\n");
+			return ret;
+		}
 
-	oversample_rate = i2s->mclk_freq / rate;
-	if (!sun4i_i2s_oversample_is_valid(oversample_rate)) {
-		dev_err(dai->dev, "Unsupported oversample rate: %d\n",
-			oversample_rate);
-		return -EINVAL;
-	}
+		oversample_rate = i2s->mclk_freq / rate;
+		if (!sun4i_i2s_oversample_is_valid(oversample_rate)) {
+			dev_err(dai->dev, "Unsupported oversample rate: %d\n",
+				oversample_rate);
+			return -EINVAL;
+		}
 
-	bclk_div = sun4i_i2s_get_bclk_div(i2s, oversample_rate,
-					  word_size);
-	if (bclk_div < 0) {
-		dev_err(dai->dev, "Unsupported BCLK divider: %d\n", bclk_div);
-		return -EINVAL;
-	}
+		bclk_div = sun4i_i2s_get_bclk_div(i2s, oversample_rate,
+						  word_size);
+		if (bclk_div < 0) {
+			dev_err(dai->dev, "Unsupported BCLK divider: %d\n",
+				bclk_div);
+			return -EINVAL;
+		}
 
-	mclk_div = sun4i_i2s_get_mclk_div(i2s, oversample_rate,
-					  clk_rate, rate);
-	if (mclk_div < 0) {
-		dev_err(dai->dev, "Unsupported MCLK divider: %d\n", mclk_div);
-		return -EINVAL;
-	}
+		mclk_div = sun4i_i2s_get_mclk_div(i2s, oversample_rate,
+						  clk_rate, rate);
+		if (mclk_div < 0) {
+			dev_err(dai->dev, "Unsupported MCLK divider: %d\n",
+				mclk_div);
+			return -EINVAL;
+		}
 
-	/* Adjust the clock division values if needed */
-	bclk_div += i2s->variant->bclk_offset;
-	mclk_div += i2s->variant->mclk_offset;
+		/* Adjust the clock division values if needed */
+		bclk_div += i2s->variant->bclk_offset;
+		mclk_div += i2s->variant->mclk_offset;
 
-	regmap_write(i2s->regmap, SUN4I_I2S_CLK_DIV_REG,
-		     SUN4I_I2S_CLK_DIV_BCLK(bclk_div) |
-		     SUN4I_I2S_CLK_DIV_MCLK(mclk_div));
+		regmap_write(i2s->regmap, SUN4I_I2S_CLK_DIV_REG,
+			     SUN4I_I2S_CLK_DIV_BCLK(bclk_div) |
+			     SUN4I_I2S_CLK_DIV_MCLK(mclk_div));
 
-	regmap_field_write(i2s->field_clkdiv_mclk_en, 1);
+		regmap_field_write(i2s->field_clkdiv_mclk_en, 1);
+	}
 
 	/* Set sync period */
 	if (i2s->variant->has_fmt_set_lrck_period)
@@ -501,10 +509,12 @@ static int sun4i_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 		case SND_SOC_DAIFMT_CBS_CFS:
 			/* BCLK and LRCLK master */
 			val = SUN4I_I2S_CTRL_MODE_MASTER;
+			i2s->bit_clk_master = true;
 			break;
 		case SND_SOC_DAIFMT_CBM_CFM:
 			/* BCLK and LRCLK slave */
 			val = SUN4I_I2S_CTRL_MODE_SLAVE;
+			i2s->bit_clk_master = false;
 			break;
 		default:
 			dev_err(dai->dev, "Unsupported slave setting: %d\n",
@@ -525,10 +535,12 @@ static int sun4i_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 			/* BCLK and LRCLK master */
 			val = SUN8I_I2S_CTRL_BCLK_OUT |
 				SUN8I_I2S_CTRL_LRCK_OUT;
+			i2s->bit_clk_master = true;
 			break;
 		case SND_SOC_DAIFMT_CBM_CFM:
 			/* BCLK and LRCLK slave */
 			val = 0;
+			i2s->bit_clk_master = false;
 			break;
 		default:
 			dev_err(dai->dev, "Unsupported slave setting: %d\n",
-- 
2.16.0

WARNING: multiple messages have this Message-ID (diff)
From: codekipper@gmail.com
To: maxime.ripard@free-electrons.com
Cc: linux-arm-kernel@lists.infradead.org,
	linux-sunxi@googlegroups.com, lgirdwood@gmail.com,
	broonie@kernel.org, linux-kernel@vger.kernel.org,
	alsa-devel@alsa-project.org, be17068@iperbole.bo.it,
	Marcus Cooper <codekipper@gmail.com>
Subject: [PATCH 2/3] ASoC: sun4i-i2s: Do not divide clocks when slave
Date: Wed, 24 Jan 2018 15:11:00 +0100	[thread overview]
Message-ID: <20180124141101.12867-3-codekipper@gmail.com> (raw)
In-Reply-To: <20180124141101.12867-1-codekipper@gmail.com>

From: Marcus Cooper <codekipper@gmail.com>

There is no need to set the clock and calculate the division of
the audio pll for the bclk and sync signals when they are not
required.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
 sound/soc/sunxi/sun4i-i2s.c | 116 ++++++++++++++++++++++++--------------------
 1 file changed, 64 insertions(+), 52 deletions(-)

diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index d7a9141514cf..626679057d0f 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -195,6 +195,8 @@ struct sun4i_i2s {
 
 	const struct sun4i_i2s_quirks	*variant;
 
+	bool bit_clk_master;
+
 	unsigned int	tdm_slots;
 	unsigned int	slot_width;
 };
@@ -282,67 +284,73 @@ static int sun4i_i2s_set_clk_rate(struct snd_soc_dai *dai,
 	int bclk_div, mclk_div;
 	int ret;
 
-	switch (rate) {
-	case 176400:
-	case 88200:
-	case 44100:
-	case 22050:
-	case 11025:
-		clk_rate = 22579200;
-		break;
+	if (i2s->bit_clk_master) {
+		switch (rate) {
+		case 176400:
+		case 88200:
+		case 44100:
+		case 22050:
+		case 11025:
+			clk_rate = 22579200;
+			break;
 
-	case 192000:
-	case 128000:
-	case 96000:
-	case 64000:
-	case 48000:
-	case 32000:
-	case 24000:
-	case 16000:
-	case 12000:
-	case 8000:
-		clk_rate = 24576000;
-		break;
+		case 192000:
+		case 128000:
+		case 96000:
+		case 64000:
+		case 48000:
+		case 32000:
+		case 24000:
+		case 16000:
+		case 12000:
+		case 8000:
+			clk_rate = 24576000;
+			break;
 
-	default:
-		dev_err(dai->dev, "Unsupported sample rate: %u\n", rate);
-		return -EINVAL;
-	}
+		default:
+			dev_err(dai->dev, "Unsupported sample rate: %u\n", rate);
+			return -EINVAL;
+		}
 
-	ret = clk_set_rate(i2s->mod_clk, clk_rate);
-	if (ret)
-		return ret;
+		ret = clk_set_rate(i2s->mod_clk, clk_rate);
+		if (ret) {
+			dev_err(dai->dev, "Unable to set clock\n");
+			return ret;
+		}
 
-	oversample_rate = i2s->mclk_freq / rate;
-	if (!sun4i_i2s_oversample_is_valid(oversample_rate)) {
-		dev_err(dai->dev, "Unsupported oversample rate: %d\n",
-			oversample_rate);
-		return -EINVAL;
-	}
+		oversample_rate = i2s->mclk_freq / rate;
+		if (!sun4i_i2s_oversample_is_valid(oversample_rate)) {
+			dev_err(dai->dev, "Unsupported oversample rate: %d\n",
+				oversample_rate);
+			return -EINVAL;
+		}
 
-	bclk_div = sun4i_i2s_get_bclk_div(i2s, oversample_rate,
-					  word_size);
-	if (bclk_div < 0) {
-		dev_err(dai->dev, "Unsupported BCLK divider: %d\n", bclk_div);
-		return -EINVAL;
-	}
+		bclk_div = sun4i_i2s_get_bclk_div(i2s, oversample_rate,
+						  word_size);
+		if (bclk_div < 0) {
+			dev_err(dai->dev, "Unsupported BCLK divider: %d\n",
+				bclk_div);
+			return -EINVAL;
+		}
 
-	mclk_div = sun4i_i2s_get_mclk_div(i2s, oversample_rate,
-					  clk_rate, rate);
-	if (mclk_div < 0) {
-		dev_err(dai->dev, "Unsupported MCLK divider: %d\n", mclk_div);
-		return -EINVAL;
-	}
+		mclk_div = sun4i_i2s_get_mclk_div(i2s, oversample_rate,
+						  clk_rate, rate);
+		if (mclk_div < 0) {
+			dev_err(dai->dev, "Unsupported MCLK divider: %d\n",
+				mclk_div);
+			return -EINVAL;
+		}
 
-	/* Adjust the clock division values if needed */
-	bclk_div += i2s->variant->bclk_offset;
-	mclk_div += i2s->variant->mclk_offset;
+		/* Adjust the clock division values if needed */
+		bclk_div += i2s->variant->bclk_offset;
+		mclk_div += i2s->variant->mclk_offset;
 
-	regmap_write(i2s->regmap, SUN4I_I2S_CLK_DIV_REG,
-		     SUN4I_I2S_CLK_DIV_BCLK(bclk_div) |
-		     SUN4I_I2S_CLK_DIV_MCLK(mclk_div));
+		regmap_write(i2s->regmap, SUN4I_I2S_CLK_DIV_REG,
+			     SUN4I_I2S_CLK_DIV_BCLK(bclk_div) |
+			     SUN4I_I2S_CLK_DIV_MCLK(mclk_div));
 
-	regmap_field_write(i2s->field_clkdiv_mclk_en, 1);
+		regmap_field_write(i2s->field_clkdiv_mclk_en, 1);
+	}
 
 	/* Set sync period */
 	if (i2s->variant->has_fmt_set_lrck_period)
@@ -501,10 +509,12 @@ static int sun4i_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 		case SND_SOC_DAIFMT_CBS_CFS:
 			/* BCLK and LRCLK master */
 			val = SUN4I_I2S_CTRL_MODE_MASTER;
+			i2s->bit_clk_master = true;
 			break;
 		case SND_SOC_DAIFMT_CBM_CFM:
 			/* BCLK and LRCLK slave */
 			val = SUN4I_I2S_CTRL_MODE_SLAVE;
+			i2s->bit_clk_master = false;
 			break;
 		default:
 			dev_err(dai->dev, "Unsupported slave setting: %d\n",
@@ -525,10 +535,12 @@ static int sun4i_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 			/* BCLK and LRCLK master */
 			val = SUN8I_I2S_CTRL_BCLK_OUT |
 				SUN8I_I2S_CTRL_LRCK_OUT;
+			i2s->bit_clk_master = true;
 			break;
 		case SND_SOC_DAIFMT_CBM_CFM:
 			/* BCLK and LRCLK slave */
 			val = 0;
+			i2s->bit_clk_master = false;
 			break;
 		default:
 			dev_err(dai->dev, "Unsupported slave setting: %d\n",
-- 
2.16.0

  parent reply	other threads:[~2018-01-24 14:11 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-24 14:10 [PATCH 0/3] ASoC: sun4i-i2s: Updates to the driver codekipper-Re5JQEeQqe8AvxtiuMwx3w
2018-01-24 14:10 ` codekipper
2018-01-24 14:10 ` codekipper at gmail.com
     [not found] ` <20180124141101.12867-1-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2018-01-24 14:10   ` [PATCH 1/3] ASoC: sun4i-i2s: Add set_tdm_slot functionality codekipper-Re5JQEeQqe8AvxtiuMwx3w
2018-01-24 14:10     ` codekipper
2018-01-24 14:10     ` codekipper at gmail.com
     [not found]     ` <20180124141101.12867-2-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2018-01-29  1:50       ` Chen-Yu Tsai
2018-01-29  1:50         ` [linux-sunxi] " Chen-Yu Tsai
2018-01-29  1:50         ` Chen-Yu Tsai
2018-01-29  7:34         ` Code Kipper
2018-01-29  7:34           ` Code Kipper
2018-01-29  7:34           ` Code Kipper
     [not found]           ` <CAEKpxBn6FNLCN22Bax1RiTdZbsHOqq6Ls5k2JYz6QJt4_77ffA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-01-29  7:38             ` Chen-Yu Tsai
2018-01-29  7:38               ` [linux-sunxi] " Chen-Yu Tsai
2018-01-29  7:38               ` Chen-Yu Tsai
     [not found]               ` <CAGb2v65-Cg4GNL6YcJin6x27bu+R4-X8zjhjYO3pnpatGvE+ew-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-01-29  7:52                 ` Code Kipper
2018-01-29  7:52                   ` [linux-sunxi] " Code Kipper
2018-01-29  7:52                   ` Code Kipper
2018-01-29  8:40               ` Maxime Ripard
2018-01-29  8:40                 ` Maxime Ripard
2018-01-29  8:40                 ` Maxime Ripard
2018-01-29 11:32           ` Mark Brown
2018-01-29 11:32             ` Mark Brown
2018-01-29 11:32             ` Mark Brown
     [not found]             ` <20180129113248.GA10969-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2018-01-29 12:28               ` Code Kipper
2018-01-29 12:28                 ` [linux-sunxi] " Code Kipper
2018-01-29 12:28                 ` Code Kipper
2018-01-29 12:31                 ` Mark Brown
2018-01-29 12:31                   ` Mark Brown
2018-01-24 14:11   ` codekipper-Re5JQEeQqe8AvxtiuMwx3w [this message]
2018-01-24 14:11     ` [PATCH 2/3] ASoC: sun4i-i2s: Do not divide clocks when slave codekipper
2018-01-24 14:11     ` codekipper at gmail.com
     [not found]     ` <20180124141101.12867-3-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2018-01-25  2:33       ` Chen-Yu Tsai
2018-01-25  2:33         ` [linux-sunxi] " Chen-Yu Tsai
2018-01-25  2:33         ` Chen-Yu Tsai
2018-01-24 14:11   ` [PATCH 3/3] ASoC: sun4i-i2s: Add regmap field to sign extend sample codekipper-Re5JQEeQqe8AvxtiuMwx3w
2018-01-24 14:11     ` codekipper
2018-01-24 14:11     ` codekipper at gmail.com
     [not found]     ` <20180124141101.12867-4-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2018-01-24 17:41       ` Code Kipper
2018-01-24 17:41         ` Code Kipper
2018-01-24 17:41         ` Code Kipper
2018-01-25  8:41     ` Maxime Ripard
2018-01-25  8:41       ` Maxime Ripard
2018-01-25  8:41       ` Maxime Ripard
2018-01-25  9:03       ` Code Kipper
2018-01-25  9:03         ` Code Kipper
2018-01-25  9:03         ` Code Kipper

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180124141101.12867-3-codekipper@gmail.com \
    --to=codekipper-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
    --cc=alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org \
    --cc=be17068-p0aYb1w59bq9tCD/VL7h6Q@public.gmane.org \
    --cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
    --cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.