From: Stephen Hemminger <stephen@networkplumber.org>
To: dev@dpdk.org
Cc: Stephen Hemminger <stephen@networkplumber.org>
Subject: [PATCH v8 06/15] net/nfp: use rte_eth_linkstatus functions
Date: Thu, 25 Jan 2018 18:01:42 -0800 [thread overview]
Message-ID: <20180126020151.979-7-stephen@networkplumber.org> (raw)
In-Reply-To: <20180126020151.979-1-stephen@networkplumber.org>
Use new rte_eth_linkstatus_get/set helper function.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
drivers/net/nfp/nfp_net.c | 72 +++++------------------------------------------
1 file changed, 7 insertions(+), 65 deletions(-)
diff --git a/drivers/net/nfp/nfp_net.c b/drivers/net/nfp/nfp_net.c
index 0044699237ac..d1ba1a117409 100644
--- a/drivers/net/nfp/nfp_net.c
+++ b/drivers/net/nfp/nfp_net.c
@@ -213,57 +213,6 @@ nn_cfg_writeq(struct nfp_net_hw *hw, int off, uint64_t val)
nn_writeq(rte_cpu_to_le_64(val), hw->ctrl_bar + off);
}
-/*
- * Atomically reads link status information from global structure rte_eth_dev.
- *
- * @param dev
- * - Pointer to the structure rte_eth_dev to read from.
- * - Pointer to the buffer to be saved with the link status.
- *
- * @return
- * - On success, zero.
- * - On failure, negative value.
- */
-static inline int
-nfp_net_dev_atomic_read_link_status(struct rte_eth_dev *dev,
- struct rte_eth_link *link)
-{
- struct rte_eth_link *dst = link;
- struct rte_eth_link *src = &dev->data->dev_link;
-
- if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
- *(uint64_t *)src) == 0)
- return -1;
-
- return 0;
-}
-
-/*
- * Atomically writes the link status information into global
- * structure rte_eth_dev.
- *
- * @param dev
- * - Pointer to the structure rte_eth_dev to read from.
- * - Pointer to the buffer to be saved with the link status.
- *
- * @return
- * - On success, zero.
- * - On failure, negative value.
- */
-static inline int
-nfp_net_dev_atomic_write_link_status(struct rte_eth_dev *dev,
- struct rte_eth_link *link)
-{
- struct rte_eth_link *dst = &dev->data->dev_link;
- struct rte_eth_link *src = link;
-
- if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
- *(uint64_t *)src) == 0)
- return -1;
-
- return 0;
-}
-
static void
nfp_net_rx_queue_release_mbufs(struct nfp_net_rxq *rxq)
{
@@ -999,8 +948,9 @@ static int
nfp_net_link_update(struct rte_eth_dev *dev, __rte_unused int wait_to_complete)
{
struct nfp_net_hw *hw;
- struct rte_eth_link link, old;
+ struct rte_eth_link link;
uint32_t nn_link_status;
+ int ret;
static const uint32_t ls_to_ethtool[] = {
[NFP_NET_CFG_STS_LINK_RATE_UNSUPPORTED] = ETH_SPEED_NUM_NONE,
@@ -1017,9 +967,6 @@ nfp_net_link_update(struct rte_eth_dev *dev, __rte_unused int wait_to_complete)
hw = NFP_NET_DEV_PRIVATE_TO_HW(dev->data->dev_private);
- memset(&old, 0, sizeof(old));
- nfp_net_dev_atomic_read_link_status(dev, &old);
-
nn_link_status = nn_cfg_readl(hw, NFP_NET_CFG_STS);
memset(&link, 0, sizeof(struct rte_eth_link));
@@ -1037,16 +984,14 @@ nfp_net_link_update(struct rte_eth_dev *dev, __rte_unused int wait_to_complete)
else
link.link_speed = ls_to_ethtool[nn_link_status];
- if (old.link_status != link.link_status) {
- nfp_net_dev_atomic_write_link_status(dev, &link);
+ ret = rte_eth_linkstatus_set(dev, &link);
+ if (ret == 0) {
if (link.link_status)
PMD_DRV_LOG(INFO, "NIC Link is Up\n");
else
PMD_DRV_LOG(INFO, "NIC Link is Down\n");
- return 0;
}
-
- return -1;
+ return ret;
}
static int
@@ -1376,8 +1321,7 @@ nfp_net_dev_link_status_print(struct rte_eth_dev *dev)
struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
struct rte_eth_link link;
- memset(&link, 0, sizeof(link));
- nfp_net_dev_atomic_read_link_status(dev, &link);
+ rte_eth_linkstatus_get(dev, &link);
if (link.link_status)
RTE_LOG(INFO, PMD, "Port %d: Link Up - speed %u Mbps - %s\n",
dev->data->port_id, link.link_speed,
@@ -1430,9 +1374,7 @@ nfp_net_dev_interrupt_handler(void *param)
PMD_DRV_LOG(DEBUG, "We got a LSC interrupt!!!\n");
- /* get the link status */
- memset(&link, 0, sizeof(link));
- nfp_net_dev_atomic_read_link_status(dev, &link);
+ rte_eth_linkstatus_get(dev, &link);
nfp_net_link_update(dev, 0);
--
2.15.1
next prev parent reply other threads:[~2018-01-26 2:02 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-26 2:01 [PATCH v8 00/15] common linkstatus functions Stephen Hemminger
2018-01-26 2:01 ` [PATCH v8 01/15] eal: introduce atomic exchange operation Stephen Hemminger
2018-01-26 17:14 ` Thomas Monjalon
2018-01-26 17:24 ` Bruce Richardson
2018-01-26 21:54 ` Stephen Hemminger
2018-01-29 9:51 ` Bruce Richardson
2018-01-26 17:59 ` Ananyev, Konstantin
2018-01-26 2:01 ` [PATCH v8 02/15] ethdev: add linkstatus get/set helper functions Stephen Hemminger
2018-01-26 2:01 ` [PATCH v8 03/15] net/virtio: use eth_linkstatus_set Stephen Hemminger
2018-01-26 2:01 ` [PATCH v8 04/15] net/vmxnet3: use rte_eth_linkstatus_set Stephen Hemminger
2018-01-26 2:01 ` [PATCH v8 05/15] net/dpaa2: " Stephen Hemminger
2018-01-26 2:01 ` Stephen Hemminger [this message]
2018-01-26 2:01 ` [PATCH v8 07/15] net/e1000: use rte_eth_linkstatus helpers Stephen Hemminger
2018-01-26 2:01 ` [PATCH v8 08/15] net/ixgbe: use rte_eth_linkstatus functions Stephen Hemminger
2018-01-26 2:01 ` [PATCH v8 09/15] net/sfc: use new " Stephen Hemminger
2018-01-26 6:31 ` Andrew Rybchenko
2018-01-26 2:01 ` [PATCH v8 10/15] net/i40e: use " Stephen Hemminger
2018-01-26 2:01 ` [PATCH v8 11/15] net/liquidio: use rte_eth_linkstatus_set Stephen Hemminger
2018-01-26 2:01 ` [PATCH v8 12/15] net/thunderx: " Stephen Hemminger
2018-01-26 2:01 ` [PATCH v8 13/15] net/szedata: use _rte_eth_linkstatus_set Stephen Hemminger
2018-01-26 2:01 ` [PATCH v8 14/15] net/octeontx: use rte_eth_linkstatus_set Stephen Hemminger
2018-01-26 2:01 ` [PATCH v8 15/15] net/enic: " Stephen Hemminger
2018-03-15 17:38 ` [PATCH v8 00/15] common linkstatus functions Ferruh Yigit
2018-03-16 10:31 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180126020151.979-7-stephen@networkplumber.org \
--to=stephen@networkplumber.org \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.