From: Ladislav Michl <ladis@linux-mips.org>
To: alsa-devel@alsa-project.org
Cc: Charles Keepax <ckeepax@opensource.cirrus.com>,
Alexandre Belloni <alexandre.belloni@free-electrons.com>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
anish kumar <yesanishhere@gmail.com>
Subject: [PATCH 0/7] Let Atmel use simple-audio-card
Date: Tue, 30 Jan 2018 12:06:04 +0100 [thread overview]
Message-ID: <20180130110604.GA18123@lenoch> (raw)
Alexandre,
following patchset is sent as a bare minimum I need to use
MAX9867 codec in master mode on AT91SAM9G20 based board.
Codec's MCLK is driven by PCK0 and SSC is wired as follows:
RK0 <-- BCLK
RF0 <-- LRCLK
TD0 --> SDIN
RD0 <-- SDOUT
Following DT framgment was used:
i2c-gpio-0 {
codec: max9867@18 {
compatible = "maxim,max9867";
reg = <0x18>;
#sound-dai-cells = <0>;
};
};
sound {
compatible = "simple-audio-card";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pck0_as_mck>;
simple-audio-card,name = "simear4-max9867";
simple-audio-card,format = "i2s";
simple-audio-card,bitclock-master = <&codec_dai>;
simple-audio-card,frame-master = <&codec_dai>;
simple-audio-card,routing =
"LINE_IN", "Line In Jack",
"Speaker", "HPOUT";
simple-audio-card,widgets =
"Line", "Line In Jack",
"Speaker", "Speaker";
cpu_dai: simple-audio-card,cpu {
sound-dai = <&ssc0>;
};
codec_dai: simple-audio-card,codec {
sound-dai = <&codec>;
clocks = <&pck0>;
clock-frequency = <12384000>;
};
};
&ssc0 {
status = "okay";
pinctrl-0 = <&pinctrl_board_ssc0_tx &pinctrl_ssc0_rx>;
atmel,clk-from-rk-pin;
#sound-dai-cells = <0>;
};
Codec code itself seems to be unused since it was merged and I'm
wondering whenever it worked at all. A comment from codec author
would help a lot, just to be sure I did not break anything.
By no means this code is ready to be merged (only except those patches
with commit log and after carefull consideration :)), I'm posting it as
a base for discussion.
Thank you,
ladis
Ladislav Michl (7):
ASoC: atmel: Remove redundant dev_err() call in probe function
ASoC: atmel_ssc_dai: Fix TCMR settings in I2S slave mode
ASoC: simple_card_utils: Set clock frequency
ASoC: max9867: Show Kconfig entry
ASoC: max9867: Calculate LRCLK divider
ASoC: max9867: Fix BSEL value in master mode.
ASoC: max9867: Take chip out of shutdown
sound/soc/atmel/atmel-classd.c | 7 +--
sound/soc/atmel/atmel-pdmic.c | 7 +--
sound/soc/atmel/atmel_ssc_dai.c | 2 +-
sound/soc/codecs/Kconfig | 3 +-
sound/soc/codecs/max9867.c | 110 +++-------------------------------
sound/soc/generic/simple-card-utils.c | 4 ++
6 files changed, 19 insertions(+), 114 deletions(-)
--
2.15.1
next reply other threads:[~2018-01-30 11:06 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-30 11:06 Ladislav Michl [this message]
2018-01-30 11:06 ` [PATCH 1/7] ASoC: atmel: Remove redundant dev_err() call in probe function Ladislav Michl
2018-02-27 16:54 ` Alexandre Belloni
2018-02-27 17:13 ` Nicolas Ferre
2018-03-01 18:06 ` Applied "ASoC: atmel: Remove redundant dev_err() call in probe function" to the asoc tree Mark Brown
2018-01-30 11:08 ` [PATCH 2/7] ASoC: atmel_ssc_dai: Fix TCMR settings in I2S slave mode Ladislav Michl
2018-02-27 17:09 ` Alexandre Belloni
2018-02-27 18:50 ` Ladislav Michl
2018-01-30 11:08 ` [PATCH 3/7] ASoC: simple_card_utils: Set clock frequency Ladislav Michl
2018-02-27 17:19 ` Alexandre Belloni
2018-01-30 11:09 ` [PATCH 4/7] ASoC: max9867: Show Kconfig entry Ladislav Michl
2018-03-01 18:06 ` Applied "ASoC: max9867: Show Kconfig entry" to the asoc tree Mark Brown
2018-01-30 11:10 ` [PATCH 5/7] ASoC: max9867: Calculate LRCLK divider Ladislav Michl
2018-01-30 11:10 ` [PATCH 6/7] ASoC: max9867: Fix BSEL value in master mode Ladislav Michl
2018-02-27 17:23 ` Alexandre Belloni
2018-02-27 19:03 ` Ladislav Michl
2018-02-28 10:00 ` Alexandre Belloni
2018-02-28 10:23 ` Ladislav Michl
2018-02-28 10:28 ` Alexandre Belloni
2018-01-30 11:11 ` [PATCH 7/7] ASoC: max9867: Take chip out of shutdown Ladislav Michl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180130110604.GA18123@lenoch \
--to=ladis@linux-mips.org \
--cc=alexandre.belloni@free-electrons.com \
--cc=alsa-devel@alsa-project.org \
--cc=ckeepax@opensource.cirrus.com \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=nicolas.ferre@microchip.com \
--cc=yesanishhere@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.