[PATCH v2 2/2] drm/i915/bxt, glk: Avoid long atomic poll during CDCLK change

[Imre Deak <imre.deak@intel.com>]

There is no requirement for doing the PCODE request polling atomically,
so do that only for a short time switching to sleeping poll afterwards.
The specification requires a 150usec timeout for the change notification,
so let's use that for the atomic poll. Do the extra 2ms poll - needed as
a workaround on BXT/GLK - in sleeping mode.

v2:
- rebase on v2 of patchset dropping the sandybridge_pcode_read/write
  refactoring (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
 drivers/gpu/drm/i915/i915_drv.h    | 5 +++--
 drivers/gpu/drm/i915/intel_cdclk.c | 4 ++--
 drivers/gpu/drm/i915/intel_pm.c    | 6 ++++--
 3 files changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 7e83d0d3e632..08c6c824d7f8 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -3724,9 +3724,10 @@ extern void intel_display_print_error_state(struct drm_i915_error_state_buf *e,
 
 int sandybridge_pcode_read(struct drm_i915_private *dev_priv, u32 mbox, u32 *val);
 int sandybridge_pcode_write_timeout(struct drm_i915_private *dev_priv, u32 mbox,
-				    u32 val, int timeout_us);
+				    u32 val, int fast_timeout_us,
+				    int slow_timeout_ms);
 #define sandybridge_pcode_write(dev_priv, mbox, val)	\
-	sandybridge_pcode_write_timeout(dev_priv, mbox, val, 500)
+	sandybridge_pcode_write_timeout(dev_priv, mbox, val, 500, 0)
 
 int skl_pcode_request(struct drm_i915_private *dev_priv, u32 mbox, u32 request,
 		      u32 reply_mask, u32 reply, int timeout_base_ms);
diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c
index a423b674fcec..ee788d5be5e3 100644
--- a/drivers/gpu/drm/i915/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/intel_cdclk.c
@@ -1378,7 +1378,7 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
 	mutex_lock(&dev_priv->pcu_lock);
 	ret = sandybridge_pcode_write_timeout(dev_priv,
 					      HSW_PCODE_DE_WRITE_FREQ_REQ,
-					      0x80000000, 2000);
+					      0x80000000, 150, 2);
 	mutex_unlock(&dev_priv->pcu_lock);
 
 	if (ret) {
@@ -1417,7 +1417,7 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
 	 */
 	ret = sandybridge_pcode_write_timeout(dev_priv,
 					      HSW_PCODE_DE_WRITE_FREQ_REQ,
-					      cdclk_state->voltage_level, 2000);
+					      cdclk_state->voltage_level, 150, 2);
 	mutex_unlock(&dev_priv->pcu_lock);
 
 	if (ret) {
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index a6098932be5a..19f00f7c7868 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -9170,7 +9170,8 @@ int sandybridge_pcode_read(struct drm_i915_private *dev_priv, u32 mbox, u32 *val
 }
 
 int sandybridge_pcode_write_timeout(struct drm_i915_private *dev_priv,
-				    u32 mbox, u32 val, int timeout_us)
+				    u32 mbox, u32 val,
+				    int fast_timeout_us, int slow_timeout_ms)
 {
 	int status;
 
@@ -9193,7 +9194,8 @@ int sandybridge_pcode_write_timeout(struct drm_i915_private *dev_priv,
 
 	if (__intel_wait_for_register_fw(dev_priv,
 					 GEN6_PCODE_MAILBOX, GEN6_PCODE_READY, 0,
-					 timeout_us, 0, NULL)) {
+					 fast_timeout_us, slow_timeout_ms,
+					 NULL)) {
 		DRM_ERROR("timeout waiting for pcode write of 0x%08x to mbox %x to finish for %ps\n",
 			  val, mbox, __builtin_return_address(0));
 		return -ETIMEDOUT;
-- 
2.13.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx