All of lore.kernel.org
 help / color / mirror / Atom feed
From: Denis Kenzior <denkenz@gmail.com>
To: linux-wireless@vger.kernel.org
Cc: Denis Kenzior <denkenz@gmail.com>
Subject: [RFC v4 6/6] mac80211: Send control port frames over nl80211
Date: Wed, 31 Jan 2018 19:04:20 -0600	[thread overview]
Message-ID: <20180201010420.6102-7-denkenz@gmail.com> (raw)
In-Reply-To: <20180201010420.6102-1-denkenz@gmail.com>

If userspace requested control port frames to go over 80211, then do so.
The control packets are intercepted just prior to delivery of the packet
to the underlying network device.

Pre-authentication type frames (protocol: 0x88c7) are also forwarded
over nl80211.

Signed-off-by: Denis Kenzior <denkenz@gmail.com>
---
 net/mac80211/cfg.c         |  2 ++
 net/mac80211/ieee80211_i.h |  1 +
 net/mac80211/main.c        |  2 ++
 net/mac80211/mlme.c        |  2 ++
 net/mac80211/rx.c          | 33 ++++++++++++++++++++++++++++-----
 5 files changed, 35 insertions(+), 5 deletions(-)

diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index fb3cf38d674f..71cb45e517b0 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -925,6 +925,7 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev,
 	 */
 	sdata->control_port_protocol = params->crypto.control_port_ethertype;
 	sdata->control_port_no_encrypt = params->crypto.control_port_no_encrypt;
+	sdata->control_port_over_nl80211 = false;
 	sdata->encrypt_headroom = ieee80211_cs_headroom(sdata->local,
 							&params->crypto,
 							sdata->vif.type);
@@ -934,6 +935,7 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev,
 			params->crypto.control_port_ethertype;
 		vlan->control_port_no_encrypt =
 			params->crypto.control_port_no_encrypt;
+		vlan->control_port_over_nl80211 = false;
 		vlan->encrypt_headroom =
 			ieee80211_cs_headroom(sdata->local,
 					      &params->crypto,
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index c78f30555b6d..c71d2eded1f2 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -899,6 +899,7 @@ struct ieee80211_sub_if_data {
 	u16 sequence_number;
 	__be16 control_port_protocol;
 	bool control_port_no_encrypt;
+	bool control_port_over_nl80211;
 	int encrypt_headroom;
 
 	atomic_t num_tx_queued;
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 0785d04a80bc..e5a51267c75d 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -554,6 +554,8 @@ struct ieee80211_hw *ieee80211_alloc_hw_nm(size_t priv_data_len,
 			   NL80211_FEATURE_USERSPACE_MPM |
 			   NL80211_FEATURE_FULL_AP_CLIENT_STATE;
 	wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_FILS_STA);
+	wiphy_ext_feature_set(wiphy,
+			      NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211);
 
 	if (!ops->hw_scan)
 		wiphy->features |= NL80211_FEATURE_LOW_PRIORITY_SCAN |
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 39b660b9a908..fc71a906939b 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -4830,6 +4830,8 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
 
 	sdata->control_port_protocol = req->crypto.control_port_ethertype;
 	sdata->control_port_no_encrypt = req->crypto.control_port_no_encrypt;
+	sdata->control_port_over_nl80211 =
+					req->crypto.control_port_over_nl80211;
 	sdata->encrypt_headroom = ieee80211_cs_headroom(local, &req->crypto,
 							sdata->vif.type);
 
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index e755f93ad735..c152fc318c11 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2243,6 +2243,32 @@ static bool ieee80211_frame_allowed(struct ieee80211_rx_data *rx, __le16 fc)
 	return true;
 }
 
+static void ieee80211_deliver_skb_to_local_stack(struct sk_buff *skb,
+						 struct ieee80211_rx_data *rx)
+{
+	struct ieee80211_sub_if_data *sdata = rx->sdata;
+	struct net_device *dev = sdata->dev;
+
+	if (unlikely((skb->protocol == sdata->control_port_protocol ||
+		      skb->protocol == cpu_to_be16(ETH_P_PREAUTH)) &&
+		     sdata->control_port_over_nl80211)) {
+		struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
+		bool noencrypt = status->flag & RX_FLAG_DECRYPTED;
+		struct ethhdr *ehdr = eth_hdr(skb);
+
+		cfg80211_rx_control_port(dev, skb->data, skb->len,
+					 ehdr->h_source,
+					 be16_to_cpu(skb->protocol), noencrypt);
+		dev_kfree_skb(skb);
+	} else {
+		/* deliver to local stack */
+		if (rx->napi)
+			napi_gro_receive(rx->napi, skb);
+		else
+			netif_receive_skb(skb);
+	}
+}
+
 /*
  * requires that rx->skb is a frame with ethernet header
  */
@@ -2327,13 +2353,10 @@ ieee80211_deliver_skb(struct ieee80211_rx_data *rx)
 #endif
 
 	if (skb) {
-		/* deliver to local stack */
 		skb->protocol = eth_type_trans(skb, dev);
 		memset(skb->cb, 0, sizeof(skb->cb));
-		if (rx->napi)
-			napi_gro_receive(rx->napi, skb);
-		else
-			netif_receive_skb(skb);
+
+		ieee80211_deliver_skb_to_local_stack(skb, rx);
 	}
 
 	if (xmit_skb) {
-- 
2.13.5

  parent reply	other threads:[~2018-02-01  1:04 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-01  1:04 [RFC v4 0/6] EAPoL over NL80211 Denis Kenzior
2018-02-01  1:04 ` [RFC v4 1/6] uapi: Add 802.11 Preauthentication to if_ether Denis Kenzior
2018-02-19 12:41   ` Johannes Berg
2018-02-01  1:04 ` [RFC v4 2/6] nl80211: Add CMD_CONTROL_PORT_FRAME API Denis Kenzior
2018-02-01  1:04 ` [RFC v4 3/6] nl80211: Implement TX of control port frames Denis Kenzior
2018-02-19 12:44   ` Johannes Berg
2018-02-20 16:52     ` Denis Kenzior
2018-02-01  1:04 ` [RFC v4 4/6] nl80211: Add CONTROL_PORT_OVER_NL80211 attribute Denis Kenzior
2018-02-01  1:04 ` [RFC v4 5/6] mac80211: Add support for tx_control_port Denis Kenzior
2018-02-01  1:04 ` Denis Kenzior [this message]
2018-02-19 12:49 ` [RFC v4 0/6] EAPoL over NL80211 Johannes Berg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180201010420.6102-7-denkenz@gmail.com \
    --to=denkenz@gmail.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.