From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lukasz Majewski Date: Sat, 10 Feb 2018 11:20:27 +0100 Subject: [U-Boot] [PATCH v1 0/5] Provide SPL support for bootcount (in the case of using falcon boot mode) Message-ID: <20180210102032.315-1-lukma@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de This patch series provides support for controlling bootcount limits in SPL. It also enables this feature on display5 board to present usage patterns. "Green" travis CI build: https://travis-ci.org/lmajewski/u-boot-dfu This patch has been applied on top of u-boot/master: SHA1: 1811a928c6c7604d6d05a84b4d552a7c31b4994e This patch series shall be applied on top of: [U-Boot,1/2] Convert CONFIG_BOOTCOUNT_LIMIT to Kconfig http://patchwork.ozlabs.org/patch/871585/ [U-Boot,2/2] Convert CONFIG_SYS_BOOTCOUNT_SINGLEWORD to Kconfig http://patchwork.ozlabs.org/patch/871586/ Lukasz Majewski (5): bootcount: config: Make the SYS_BOOTCOUNT_ADDR available also for non EXT setups bootcount: Add function wrappers to handle bootcount increment and error checking spl: bootcount: Enable bootcount support in SPL config: display5: Enable boot count feature in the display5 board arm: display5: Extend SPL to support bootcount checking board/liebherr/display5/spl.c | 4 +++- common/spl/Kconfig | 9 +++++++++ configs/display5_defconfig | 5 +++++ drivers/Makefile | 1 + drivers/bootcount/Kconfig | 13 ++++++------- include/bootcount.h | 25 +++++++++++++++++++++++++ 6 files changed, 49 insertions(+), 8 deletions(-) -- 2.11.0