From: Lukasz Majewski <lukma@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 4/8] Convert CONFIG_BOOTCOUNT_ENV to Kconfig
Date: Sun, 11 Feb 2018 20:09:17 +0100 [thread overview]
Message-ID: <20180211200917.68813797@jawa> (raw)
In-Reply-To: <1518350813-3418-5-git-send-email-alex.kiernan@gmail.com>
On Sun, 11 Feb 2018 12:06:49 +0000
Alex Kiernan <alex.kiernan@gmail.com> wrote:
> This converts the following to Kconfig:
> CONFIG_BOOTCOUNT_ENV
>
> Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
> ---
>
> README | 11 -----------
> configs/draco_defconfig | 1 +
> configs/etamin_defconfig | 1 +
> configs/pxm2_defconfig | 1 +
> configs/rastaban_defconfig | 1 +
> configs/rut_defconfig | 1 +
> configs/thuban_defconfig | 1 +
> drivers/bootcount/Kconfig | 12 ++++++++++++
> include/configs/siemens-am33x-common.h | 2 --
> scripts/config_whitelist.txt | 1 -
> 10 files changed, 18 insertions(+), 14 deletions(-)
>
> diff --git a/README b/README
> index f51f670..0581b58 100644
> --- a/README
> +++ b/README
> @@ -714,17 +714,6 @@ The following options need to be configured:
> RAM and NFS.
>
> - Bootcount:
> - CONFIG_BOOTCOUNT_ENV
> - If no softreset save registers are found on the
> hardware
> - "bootcount" is stored in the environment. To prevent
> a
> - saveenv on all reboots, the environment variable
> - "upgrade_available" is used. If "upgrade_available"
> is
> - 0, "bootcount" is always 0, if "upgrade_available" is
> - 1 "bootcount" is incremented in the environment.
> - So the Userspace Applikation must set the
> "upgrade_available"
> - and "bootcount" variable to 0, if a boot was
> successfully. -
> -- Pre-Boot Commands:
> CONFIG_PREBOOT
>
> When this option is #defined, the existence of the
> diff --git a/configs/draco_defconfig b/configs/draco_defconfig
> index 693d91c..0416daa 100644
> --- a/configs/draco_defconfig
> +++ b/configs/draco_defconfig
> @@ -52,6 +52,7 @@ CONFIG_OF_CONTROL=y
> CONFIG_OF_EMBED=y
> CONFIG_ENV_IS_IN_NAND=y
> CONFIG_BOOTCOUNT_LIMIT=y
> +CONFIG_BOOTCOUNT_ENV=y
> CONFIG_DFU_NAND=y
> CONFIG_MMC_OMAP_HS=y
> CONFIG_NAND=y
> diff --git a/configs/etamin_defconfig b/configs/etamin_defconfig
> index e7a3d22..7d639ea 100644
> --- a/configs/etamin_defconfig
> +++ b/configs/etamin_defconfig
> @@ -52,6 +52,7 @@ CONFIG_OF_CONTROL=y
> CONFIG_OF_EMBED=y
> CONFIG_ENV_IS_IN_NAND=y
> CONFIG_BOOTCOUNT_LIMIT=y
> +CONFIG_BOOTCOUNT_ENV=y
> CONFIG_DFU_NAND=y
> CONFIG_MMC_OMAP_HS=y
> CONFIG_NAND=y
> diff --git a/configs/pxm2_defconfig b/configs/pxm2_defconfig
> index 6063259..90783b4 100644
> --- a/configs/pxm2_defconfig
> +++ b/configs/pxm2_defconfig
> @@ -55,6 +55,7 @@ CONFIG_OF_CONTROL=y
> CONFIG_OF_EMBED=y
> CONFIG_ENV_IS_IN_NAND=y
> CONFIG_BOOTCOUNT_LIMIT=y
> +CONFIG_BOOTCOUNT_ENV=y
> CONFIG_DFU_NAND=y
> CONFIG_MMC_OMAP_HS=y
> CONFIG_NAND=y
> diff --git a/configs/rastaban_defconfig b/configs/rastaban_defconfig
> index ce6981e..c0947e9 100644
> --- a/configs/rastaban_defconfig
> +++ b/configs/rastaban_defconfig
> @@ -52,6 +52,7 @@ CONFIG_OF_CONTROL=y
> CONFIG_OF_EMBED=y
> CONFIG_ENV_IS_IN_NAND=y
> CONFIG_BOOTCOUNT_LIMIT=y
> +CONFIG_BOOTCOUNT_ENV=y
> CONFIG_DFU_NAND=y
> CONFIG_MMC_OMAP_HS=y
> CONFIG_NAND=y
> diff --git a/configs/rut_defconfig b/configs/rut_defconfig
> index b31eb97..685b4c8 100644
> --- a/configs/rut_defconfig
> +++ b/configs/rut_defconfig
> @@ -56,6 +56,7 @@ CONFIG_OF_CONTROL=y
> CONFIG_OF_EMBED=y
> CONFIG_ENV_IS_IN_NAND=y
> CONFIG_BOOTCOUNT_LIMIT=y
> +CONFIG_BOOTCOUNT_ENV=y
> CONFIG_DFU_NAND=y
> CONFIG_MMC_OMAP_HS=y
> CONFIG_NAND=y
> diff --git a/configs/thuban_defconfig b/configs/thuban_defconfig
> index 4a3c0cd..f5d1077 100644
> --- a/configs/thuban_defconfig
> +++ b/configs/thuban_defconfig
> @@ -52,6 +52,7 @@ CONFIG_OF_CONTROL=y
> CONFIG_OF_EMBED=y
> CONFIG_ENV_IS_IN_NAND=y
> CONFIG_BOOTCOUNT_LIMIT=y
> +CONFIG_BOOTCOUNT_ENV=y
> CONFIG_DFU_NAND=y
> CONFIG_MMC_OMAP_HS=y
> CONFIG_NAND=y
> diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig
> index e905295..40a0755 100644
> --- a/drivers/bootcount/Kconfig
> +++ b/drivers/bootcount/Kconfig
> @@ -28,6 +28,18 @@ config BOOTCOUNT_AM33XX
> This requires the RTC clocks, etc, to be enabled prior to
> use and not all boards with this IP block on it will have the RTC in
> use.
> +config BOOTCOUNT_ENV
> + bool "Boot counter in environment"
> + help
> + If no softreset save registers are found on the hardware
> + "bootcount" is stored in the environment. To prevent a
> + saveenv on all reboots, the environment variable
> + "upgrade_available" is used. If "upgrade_available" is
> + 0, "bootcount" is always 0, if "upgrade_available" is
> + 1 "bootcount" is incremented in the environment.
> + So the Userspace Application must set the
> "upgrade_available"
> + and "bootcount" variable to 0, if a boot was successfully.
> +
> endchoice
>
> config SYS_BOOTCOUNT_SINGLEWORD
> diff --git a/include/configs/siemens-am33x-common.h
> b/include/configs/siemens-am33x-common.h index eb4b1f6..a7b427f 100644
> --- a/include/configs/siemens-am33x-common.h
> +++ b/include/configs/siemens-am33x-common.h
> @@ -500,6 +500,4 @@
> #define CONFIG_RESET_TO_RETRY
> #define CONFIG_BOOT_RETRY_TIME 60
>
> -#define CONFIG_BOOTCOUNT_ENV
> -
> #endif /* ! __CONFIG_SIEMENS_AM33X_COMMON_H */
> diff --git a/scripts/config_whitelist.txt
> b/scripts/config_whitelist.txt index 46d9d5c..0fd4ad6 100644
> --- a/scripts/config_whitelist.txt
> +++ b/scripts/config_whitelist.txt
> @@ -148,7 +148,6 @@ CONFIG_BOOGER
> CONFIG_BOOM
> CONFIG_BOOTBLOCK
> CONFIG_BOOTCOUNT_ALEN
> -CONFIG_BOOTCOUNT_ENV
> CONFIG_BOOTCOUNT_I2C
> CONFIG_BOOTCOUNT_LIMIT
> CONFIG_BOOTCOUNT_RAM
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180211/829385ff/attachment.sig>
next prev parent reply other threads:[~2018-02-11 19:09 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1518350813-3418-1-git-send-email-alex.kiernan@gmail.com>
2018-02-11 12:06 ` [U-Boot] [PATCH 1/8] Merge CONFIG_BOOTCOUNT and CONFIG_BOOTCOUNT_LIMIT Alex Kiernan
2018-02-11 19:08 ` Lukasz Majewski
2018-02-16 2:13 ` Heinrich Schuchardt
2018-02-12 7:29 ` [U-Boot] EXT: " Ray, Ian
2018-02-11 12:06 ` [U-Boot] [PATCH 2/8] Prepare for multiple bootcount drivers Alex Kiernan
2018-02-11 19:08 ` Lukasz Majewski
2018-02-11 12:06 ` [U-Boot] [PATCH 3/8] Convert CONFIG_BOOTCOUNT_AM33XX to Kconfig Alex Kiernan
2018-02-11 19:08 ` Lukasz Majewski
2018-02-12 7:58 ` [U-Boot] Antwort: " Hannes Schmelzer
2018-02-11 12:06 ` [U-Boot] [PATCH 4/8] Convert CONFIG_BOOTCOUNT_ENV " Alex Kiernan
2018-02-11 19:09 ` Lukasz Majewski [this message]
2018-02-13 9:30 ` Lukasz Majewski
2018-02-13 9:52 ` Alex Kiernan
2018-02-11 12:06 ` [U-Boot] [PATCH 5/8] Convert CONFIG_BOOTCOUNT_RAM " Alex Kiernan
2018-02-11 19:04 ` Lukasz Majewski
2018-02-11 12:06 ` [U-Boot] [PATCH 6/8] Convert CONFIG_BOOTCOUNT_I2C " Alex Kiernan
2018-02-11 19:05 ` Lukasz Majewski
2018-02-11 12:06 ` [U-Boot] [PATCH 7/8] Integrate AT91 bootcount driver Alex Kiernan
2018-02-11 19:05 ` Lukasz Majewski
2018-02-11 12:06 ` [U-Boot] [PATCH 8/8] Migrate generic bootcount to Kconfig Alex Kiernan
2018-02-11 19:36 ` Lukasz Majewski
2018-02-11 21:04 ` Alex Kiernan
2018-02-11 21:44 ` Lukasz Majewski
2018-02-12 5:55 ` Alex Kiernan
2018-02-12 8:48 ` Lukasz Majewski
2018-02-12 10:27 ` Lukasz Majewski
2018-02-13 9:51 ` Alex Kiernan
2018-02-13 14:41 ` Lukasz Majewski
2018-02-14 6:23 ` Alex Kiernan
2018-02-14 8:53 ` Lukasz Majewski
2018-02-14 16:34 ` Alex Kiernan
2018-02-14 19:13 ` Lukasz Majewski
2018-02-15 14:04 ` Alex Kiernan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180211200917.68813797@jawa \
--to=lukma@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.