From: Eric Blake <eblake@redhat.com>
To: qemu-devel@nongnu.org
Cc: qemu-block@nongnu.org, kwolf@redhat.com,
Max Reitz <mreitz@redhat.com>, Stefan Weil <sw@weilnetz.de>
Subject: [Qemu-devel] [PATCH 2/6] file-win32: Switch to byte-based callbacks
Date: Thu, 15 Feb 2018 13:28:25 -0600 [thread overview]
Message-ID: <20180215192829.9944-3-eblake@redhat.com> (raw)
In-Reply-To: <20180215192829.9944-1-eblake@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Make the change for the last few sector-based callbacks
in the file-win32 driver.
Note that the driver was already using byte-based calls for
performing actual I/O, so this just gets rid of a round trip
of scaling; however, the block layer defaults this driver to
use request_alignment of 512, and I did not change that,
because I don't know if Windows is tolerant of non-sector AIO
operations.
Signed-off-by: Eric Blake <eblake@redhat.com>
---
Compile-tested via 'make docker-test-mingw@fedora', but I don't
have a sane way to test whether it actually works.
---
include/block/raw-aio.h | 2 +-
block/file-win32.c | 36 ++++++++++++++++++------------------
block/win32-aio.c | 5 ++---
3 files changed, 21 insertions(+), 22 deletions(-)
diff --git a/include/block/raw-aio.h b/include/block/raw-aio.h
index a4cdbbf1b7a..9e47b8a629d 100644
--- a/include/block/raw-aio.h
+++ b/include/block/raw-aio.h
@@ -57,7 +57,7 @@ void win32_aio_cleanup(QEMUWin32AIOState *aio);
int win32_aio_attach(QEMUWin32AIOState *aio, HANDLE hfile);
BlockAIOCB *win32_aio_submit(BlockDriverState *bs,
QEMUWin32AIOState *aio, HANDLE hfile,
- int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
+ uint64_t offset, uint64_t bytes, QEMUIOVector *qiov,
BlockCompletionFunc *cb, void *opaque, int type);
void win32_aio_detach_aio_context(QEMUWin32AIOState *aio,
AioContext *old_context);
diff --git a/block/file-win32.c b/block/file-win32.c
index f24c7bb92c6..7a2e3367946 100644
--- a/block/file-win32.c
+++ b/block/file-win32.c
@@ -410,32 +410,32 @@ fail:
return ret;
}
-static BlockAIOCB *raw_aio_readv(BlockDriverState *bs,
- int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
- BlockCompletionFunc *cb, void *opaque)
+static BlockAIOCB *raw_aio_preadv(BlockDriverState *bs,
+ uint64_t offset, uint64_t bytes,
+ QEMUIOVector *qiov, int flags,
+ BlockCompletionFunc *cb, void *opaque)
{
BDRVRawState *s = bs->opaque;
if (s->aio) {
- return win32_aio_submit(bs, s->aio, s->hfile, sector_num, qiov,
- nb_sectors, cb, opaque, QEMU_AIO_READ);
+ return win32_aio_submit(bs, s->aio, s->hfile, offset, bytes, qiov,
+ cb, opaque, QEMU_AIO_READ);
} else {
- return paio_submit(bs, s->hfile, sector_num << BDRV_SECTOR_BITS, qiov,
- nb_sectors << BDRV_SECTOR_BITS,
+ return paio_submit(bs, s->hfile, offset, qiov, bytes,
cb, opaque, QEMU_AIO_READ);
}
}
-static BlockAIOCB *raw_aio_writev(BlockDriverState *bs,
- int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
- BlockCompletionFunc *cb, void *opaque)
+static BlockAIOCB *raw_aio_pwritev(BlockDriverState *bs,
+ uint64_t offset, uint64_t bytes,
+ QEMUIOVector *qiov, int flags,
+ BlockCompletionFunc *cb, void *opaque)
{
BDRVRawState *s = bs->opaque;
if (s->aio) {
- return win32_aio_submit(bs, s->aio, s->hfile, sector_num, qiov,
- nb_sectors, cb, opaque, QEMU_AIO_WRITE);
+ return win32_aio_submit(bs, s->aio, s->hfile, offset, bytes, qiov,
+ cb, opaque, QEMU_AIO_WRITE);
} else {
- return paio_submit(bs, s->hfile, sector_num << BDRV_SECTOR_BITS, qiov,
- nb_sectors << BDRV_SECTOR_BITS,
+ return paio_submit(bs, s->hfile, offset, qiov, bytes,
cb, opaque, QEMU_AIO_WRITE);
}
}
@@ -602,8 +602,8 @@ BlockDriver bdrv_file = {
.bdrv_create = raw_create,
.bdrv_has_zero_init = bdrv_has_zero_init_1,
- .bdrv_aio_readv = raw_aio_readv,
- .bdrv_aio_writev = raw_aio_writev,
+ .bdrv_aio_preadv = raw_aio_preadv,
+ .bdrv_aio_pwritev = raw_aio_pwritev,
.bdrv_aio_flush = raw_aio_flush,
.bdrv_truncate = raw_truncate,
@@ -764,8 +764,8 @@ static BlockDriver bdrv_host_device = {
.bdrv_file_open = hdev_open,
.bdrv_close = raw_close,
- .bdrv_aio_readv = raw_aio_readv,
- .bdrv_aio_writev = raw_aio_writev,
+ .bdrv_aio_preadv = raw_aio_preadv,
+ .bdrv_aio_pwritev = raw_aio_pwritev,
.bdrv_aio_flush = raw_aio_flush,
.bdrv_detach_aio_context = raw_detach_aio_context,
diff --git a/block/win32-aio.c b/block/win32-aio.c
index 3be8f458fab..9cd355d42f8 100644
--- a/block/win32-aio.c
+++ b/block/win32-aio.c
@@ -112,15 +112,14 @@ static const AIOCBInfo win32_aiocb_info = {
BlockAIOCB *win32_aio_submit(BlockDriverState *bs,
QEMUWin32AIOState *aio, HANDLE hfile,
- int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
+ uint64_t offset, uint64_t bytes, QEMUIOVector *qiov,
BlockCompletionFunc *cb, void *opaque, int type)
{
struct QEMUWin32AIOCB *waiocb;
- uint64_t offset = sector_num * 512;
DWORD rc;
waiocb = qemu_aio_get(&win32_aiocb_info, bs, cb, opaque);
- waiocb->nbytes = nb_sectors * 512;
+ waiocb->nbytes = bytes;
waiocb->qiov = qiov;
waiocb->is_read = (type == QEMU_AIO_READ);
--
2.14.3
next prev parent reply other threads:[~2018-02-15 19:28 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-15 19:28 [Qemu-devel] [PATCH 0/6] block: byte-based AIO read/write Eric Blake
2018-02-15 19:28 ` [Qemu-devel] [PATCH 1/6] block: Support byte-based aio callbacks Eric Blake
2018-04-24 15:40 ` Kevin Wolf
2018-04-24 17:06 ` Eric Blake
2018-04-24 17:15 ` Kevin Wolf
2018-04-24 19:16 ` Eric Blake
2018-02-15 19:28 ` Eric Blake [this message]
2018-02-15 19:28 ` [Qemu-devel] [PATCH 3/6] null: Switch to byte-based read/write Eric Blake
2018-04-24 15:52 ` Kevin Wolf
2018-04-24 17:00 ` Eric Blake
2018-04-24 17:19 ` Kevin Wolf
2018-04-24 17:40 ` Eric Blake
2018-02-15 19:28 ` [Qemu-devel] [PATCH 4/6] rbd: Switch to byte-based callbacks Eric Blake
2018-02-15 19:28 ` [Qemu-devel] [PATCH 5/6] vxhs: " Eric Blake
2018-02-15 19:28 ` [Qemu-devel] [PATCH 6/6] block: Drop last of the sector-based aio callbacks Eric Blake
2018-04-24 15:02 ` [Qemu-devel] [PATCH 0/6] block: byte-based AIO read/write Eric Blake
2018-04-24 19:13 ` John Snow
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180215192829.9944-3-eblake@redhat.com \
--to=eblake@redhat.com \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=sw@weilnetz.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.