From: Borislav Petkov <bp@alien8.de>
To: X86 ML <x86@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>, LKML <linux-kernel@vger.kernel.org>
Subject: [PATCH 2/8] x86/MCE: Convert mca_config bools to a bitfield
Date: Wed, 21 Feb 2018 11:18:54 +0100 [thread overview]
Message-ID: <20180221101900.10326-3-bp@alien8.de> (raw)
In-Reply-To: <20180221101900.10326-1-bp@alien8.de>
From: Borislav Petkov <bp@suse.de>
... to save space when future flags are added.
No functionality change.
Signed-off-by: Borislav Petkov <bp@suse.de>
---
arch/x86/kernel/cpu/mcheck/mce-internal.h | 13 ++++++++-----
arch/x86/kernel/cpu/mcheck/mce.c | 16 ++++++++--------
2 files changed, 16 insertions(+), 13 deletions(-)
diff --git a/arch/x86/kernel/cpu/mcheck/mce-internal.h b/arch/x86/kernel/cpu/mcheck/mce-internal.h
index 986c8dd2d320..ceb67cd5918f 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-internal.h
+++ b/arch/x86/kernel/cpu/mcheck/mce-internal.h
@@ -116,12 +116,15 @@ static inline void mce_unregister_injector_chain(struct notifier_block *nb) { }
struct mca_config {
bool dont_log_ce;
bool cmci_disabled;
- bool lmce_disabled;
bool ignore_ce;
- bool disabled;
- bool ser;
- bool recovery;
- bool bios_cmci_threshold;
+
+ __u64 lmce_disabled : 1,
+ disabled : 1,
+ ser : 1,
+ recovery : 1,
+ bios_cmci_threshold : 1,
+ __reserved : 59;
+
u8 banks;
s8 bootlog;
int tolerant;
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 75f405ac085c..9c8cb58c77f8 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -1506,7 +1506,7 @@ static int __mcheck_cpu_cap_init(void)
mca_cfg.rip_msr = MSR_IA32_MCG_EIP;
if (cap & MCG_SER_P)
- mca_cfg.ser = true;
+ mca_cfg.ser = 1;
return 0;
}
@@ -1814,12 +1814,12 @@ void mcheck_cpu_init(struct cpuinfo_x86 *c)
return;
if (__mcheck_cpu_cap_init() < 0 || __mcheck_cpu_apply_quirks(c) < 0) {
- mca_cfg.disabled = true;
+ mca_cfg.disabled = 1;
return;
}
if (mce_gen_pool_init()) {
- mca_cfg.disabled = true;
+ mca_cfg.disabled = 1;
pr_emerg("Couldn't allocate MCE records pool!\n");
return;
}
@@ -1897,11 +1897,11 @@ static int __init mcheck_enable(char *str)
if (*str == '=')
str++;
if (!strcmp(str, "off"))
- cfg->disabled = true;
+ cfg->disabled = 1;
else if (!strcmp(str, "no_cmci"))
cfg->cmci_disabled = true;
else if (!strcmp(str, "no_lmce"))
- cfg->lmce_disabled = true;
+ cfg->lmce_disabled = 1;
else if (!strcmp(str, "dont_log_ce"))
cfg->dont_log_ce = true;
else if (!strcmp(str, "ignore_ce"))
@@ -1909,9 +1909,9 @@ static int __init mcheck_enable(char *str)
else if (!strcmp(str, "bootlog") || !strcmp(str, "nobootlog"))
cfg->bootlog = (str[0] == 'b');
else if (!strcmp(str, "bios_cmci_threshold"))
- cfg->bios_cmci_threshold = true;
+ cfg->bios_cmci_threshold = 1;
else if (!strcmp(str, "recovery"))
- cfg->recovery = true;
+ cfg->recovery = 1;
else if (isdigit(str[0])) {
if (get_option(&str, &cfg->tolerant) == 2)
get_option(&str, &(cfg->monarch_timeout));
@@ -2376,7 +2376,7 @@ device_initcall_sync(mcheck_init_device);
*/
static int __init mcheck_disable(char *str)
{
- mca_cfg.disabled = true;
+ mca_cfg.disabled = 1;
return 1;
}
__setup("nomce", mcheck_disable);
--
2.13.0
next prev parent reply other threads:[~2018-02-21 10:19 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-21 10:18 [PATCH 0/8] x86/RAS: Some accumulated stuff Borislav Petkov
2018-02-21 10:18 ` [PATCH 1/8] x86/MCE: Put private structures and definitions into the internal header Borislav Petkov
2018-02-21 11:39 ` Ingo Molnar
2018-02-21 13:28 ` Borislav Petkov
2018-02-21 10:18 ` Borislav Petkov [this message]
2018-02-21 10:18 ` [PATCH 3/8] x86/mce: Issue the mcelog --ascii message on !AMD Borislav Petkov
2018-02-21 10:18 ` [PATCH 4/8] x86/MCE/AMD: Collect error info even if valid bits are not set Borislav Petkov
2018-02-21 10:18 ` [PATCH 5/8] x86/MCE/AMD: Pass the bank number to smca_get_bank_type() Borislav Petkov
2018-02-21 10:18 ` [PATCH 6/8] x86/MCE/AMD, EDAC/mce_amd: Enumerate Reserved SMCA bank type Borislav Petkov
2018-02-21 10:18 ` [PATCH 7/8] x86/MCE/AMD: Get address from already initialized block Borislav Petkov
2018-02-21 10:19 ` [PATCH 8/8] x86/MCE/AMD: Carve out SMCA get_block_address() code Borislav Petkov
-- strict thread matches above, loose matches on Subject: below --
2018-02-21 17:58 [tip:ras/core] x86/mce: Put private structures and definitions into the internal header tip-bot for Borislav Petkov
2018-02-21 17:58 ` tip-bot for Borislav Petkov
2018-02-21 17:58 [tip:ras/core] x86/mce: Convert 'struct mca_config' bools to a bitfield tip-bot for Borislav Petkov
2018-02-21 17:58 ` tip-bot for Borislav Petkov
2018-02-21 17:59 [tip:ras/core] x86/mce: Issue the 'mcelog --ascii' message only on !AMD tip-bot for Borislav Petkov
2018-02-21 17:59 ` tip-bot for Borislav Petkov
2018-02-21 17:59 [tip:ras/core] x86/mce/AMD: Collect error info even if valid bits are not set tip-bot for Borislav Petkov
2018-02-21 17:59 ` tip-bot for Borislav Petkov
2018-02-21 18:00 [tip:ras/core] x86/mce/AMD: Pass the bank number to smca_get_bank_type() tip-bot for Borislav Petkov
2018-02-21 18:00 ` tip-bot for Yazen Ghannam
2018-02-21 18:00 [tip:ras/core] x86/mce/AMD, EDAC/mce_amd: Enumerate Reserved SMCA bank type tip-bot for Borislav Petkov
2018-02-21 18:00 ` tip-bot for Yazen Ghannam
2018-02-21 18:01 [tip:ras/core] x86/mce/AMD: Get address from already initialized block tip-bot for Borislav Petkov
2018-02-21 18:01 ` tip-bot for Yazen Ghannam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180221101900.10326-3-bp@alien8.de \
--to=bp@alien8.de \
--cc=linux-kernel@vger.kernel.org \
--cc=tony.luck@intel.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.