diff for duplicates of <20180222223844.98527-1-npcomplete13@gmail.com>

diff --git a/a/1.txt b/N1/1.txt
index f30b4f1..d9fe423 100644
--- a/a/1.txt
+++ b/N1/1.txt
@@ -5,9 +5,9 @@ Processor	- Broadcom BCM4709C0KFEBG dual-core @ 1.4 GHz
 Switch		- BCM53012 in BCM4709C0KFEBG & external BCM53125
 DDR3 RAM	- 256 MB
 Flash		- 128 MB (Toshiba TC58BVG0S3HTA00)
-2.4GHz		- BCM4366 4?4 2.4/5G single chip 802.11ac SoC
+2.4GHz		- BCM4366 4×4 2.4/5G single chip 802.11ac SoC
 Power Amp	- Skyworks SE2623L 2.4 GHz power amp (x4)
-5GHz x 2	- BCM4366 4?4 2.4/5G single chip 802.11ac SoC
+5GHz x 2	- BCM4366 4×4 2.4/5G single chip 802.11ac SoC
 Power Amp	- PLX Technology PEX8603 3-lane, 3-port PCIe switch
 Ports		- 8 Ports, 1 WAN Ports
 Antennas	- 8 Antennas
@@ -28,7 +28,7 @@ bridge vlan add vid 1 dev extsw pvid tagged
 Changes in v2:
  - Properly define mdio mux, internal mdio, external mdio, mii bus
  - Now we define usb3 phy as a mdio node connected to internal mdio
-   Thanks to work done by Rafa? Mi?ecki on the usb3 phy mdio driver
+   Thanks to work done by Rafał Miłecki on the usb3 phy mdio driver
  - Define external SW as a mdio-mii node connected to external mdio
 
 [1] https://www.spinics.net/lists/arm-kernel/msg590992.html
@@ -176,27 +176,27 @@ index b6750f7..5f53207 100644
 +		#address-cells = <1>;
 +		#size-cells = <0>;
 +
-+		port at 1 {
++		port@1 {
 +			reg = <1>;
 +			label = "lan7";
 +		};
 +
-+		port at 2 {
++		port@2 {
 +			reg = <2>;
 +			label = "lan4";
 +		};
 +
-+		port at 3 {
++		port@3 {
 +			reg = <3>;
 +			label = "lan8";
 +		};
 +
-+		port at 4 {
++		port@4 {
 +			reg = <4>;
 +			label = "wan";
 +		};
 +
-+		port at 5 {
++		port@5 {
 +			reg = <5>;
 +			ethernet = <&gmac0>;
 +			label = "cpu";
@@ -207,7 +207,7 @@ index b6750f7..5f53207 100644
 +			};
 +		};
 +
-+		port at 7 {
++		port@7 {
 +			reg = <7>;
 +			ethernet = <&gmac1>;
 +			label = "cpu";
@@ -218,7 +218,7 @@ index b6750f7..5f53207 100644
 +			};
 +		};
 +
-+		port at 8 {
++		port@8 {
 +			reg = <8>;
 +			ethernet = <&gmac2>;
 +			label = "cpu";
@@ -229,7 +229,7 @@ index b6750f7..5f53207 100644
 +			};
 +		};
 +
-+		sw0_p0: port at 0 {
++		sw0_p0: port@0 {
 +			reg = <0>;
 +			label = "extsw";
 +
@@ -244,7 +244,7 @@ index b6750f7..5f53207 100644
 +&mdio_mii {
 +	status = "okay";
 +
-+		switch at 0  {
++		switch@0  {
 +			compatible = "brcm,bcm53125";
 +			#address-cells = <1>;
 +			#size-cells = <0>;
@@ -257,32 +257,32 @@ index b6750f7..5f53207 100644
 +				#address-cells = <1>;
 +				#size-cells = <0>;
 +
-+				port at 0 {
++				port@0 {
 +					reg = <0>;
 +					label = "lan1";
 +				};
 +
-+				port at 1 {
++				port@1 {
 +					reg = <1>;
 +					label = "lan5";
 +				};
 +
-+				port at 2 {
++				port@2 {
 +					reg = <2>;
 +					label = "lan2";
 +				};
 +
-+				port at 3 {
++				port@3 {
 +					reg = <3>;
 +					label = "lan6";
 +				};
 +
-+				port at 4 {
++				port@4 {
 +					reg = <4>;
 +					label = "lan3";
 +				};
 +
-+				sw1_p8: port at 8 {
++				sw1_p8: port@8 {
 +					reg = <8>;
 +					ethernet = <&sw0_p0>;
 +					label = "cpu";
@@ -328,7 +328,7 @@ index 9a076c4..9e4386a 100644
 -		#phy-cells = <0>;
 -	};
 -
- 	axi at 18000000 {
+ 	axi@18000000 {
  		compatible = "brcm,bus-axi";
  		reg = <0x18000000 0x1000>;
 @@ -359,7 +352,55 @@
@@ -345,12 +345,12 @@ index 9a076c4..9e4386a 100644
 +		reg = <0x18003000 0x4>;
 +		mux-mask = <0x200>;
 +
-+		mdio_int: mdio at 0 {		/* BIT(9) = 0 => internal mdio */
++		mdio_int: mdio@0 {		/* BIT(9) = 0 => internal mdio */
 +			reg = <0x0>;
 +			#address-cells = <1>;
 +			#size-cells = <0>;
 +
-+			usb3_phy: usb3-phy at 10 {
++			usb3_phy: usb3-phy@10 {
 +				compatible = "brcm,ns-ax-usb3-phy";
 +				reg = <0x10>;
 +				usb3-dmp-syscon = <&usb3_dmp>;
@@ -358,7 +358,7 @@ index 9a076c4..9e4386a 100644
 +			};
 +		};
 +
-+		mdio_ext: mdio at 200 {		/* BIT(9) = 1 => external mdio */
++		mdio_ext: mdio@200 {		/* BIT(9) = 1 => external mdio */
 +			reg = <0x200>;
 +			#address-cells = <1>;
 +			#size-cells = <0>;
@@ -375,17 +375,23 @@ index 9a076c4..9e4386a 100644
 +		mux-mask = <0xc0>;		/* BIT(6) = mdc, BIT(7) = mdio */
  		status = "disabled";
 +
-+		mdio_mii: mdio-mii at 0 {
++		mdio_mii: mdio-mii@0 {
 +			reg = <0x0>;		/* Enable mii function */
 +			#address-cells = <1>;
 +			#size-cells = <0>;
 +		};
 +	};
 +
-+	usb3_dmp: syscon at 18105000 {
++	usb3_dmp: syscon@18105000 {
 +		reg = <0x18105000 0x1000>;
  	};
  
- 	i2c0: i2c at 18009000 {
+ 	i2c0: i2c@18009000 {
 -- 
 2.9.3
+
+
+_______________________________________________
+linux-arm-kernel mailing list
+linux-arm-kernel@lists.infradead.org
+http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
diff --git a/a/content_digest b/N1/content_digest
index eacbb12..de4d19e 100644
--- a/a/content_digest
+++ b/N1/content_digest
@@ -1,7 +1,17 @@
- "From\0npcomplete13@gmail.com (Vivek Unune)\0"
+ "From\0Vivek Unune <npcomplete13@gmail.com>\0"
  "Subject\0[v2] ARM: dts: BCM5301X: Add support for Linksys EA9500\0"
  "Date\0Thu, 22 Feb 2018 17:38:44 -0500\0"
- "To\0linux-arm-kernel@lists.infradead.org\0"
+ "Cc\0Mark Rutland <mark.rutland@arm.com>"
+  devicetree@vger.kernel.org
+  Jon Mason <jonmason@broadcom.com>
+  Hauke Mehrtens <hauke@hauke-m.de>
+ " Rafa\305\202 Mi\305\202ecki <zajec5@gmail.com>"
+  Russell King <linux@armlinux.org.uk>
+  linux-kernel@vger.kernel.org
+  Rob Herring <robh+dt@kernel.org>
+  bcm-kernel-feedback-list@broadcom.com
+  linux-arm-kernel@lists.infradead.org
+ " Vivek Unune <npcomplete13@gmail.com>\0"
  "\00:1\0"
  "b\0"
  "Hardware Info\n"
@@ -11,9 +21,9 @@
  "Switch\t\t- BCM53012 in BCM4709C0KFEBG & external BCM53125\n"
  "DDR3 RAM\t- 256 MB\n"
  "Flash\t\t- 128 MB (Toshiba TC58BVG0S3HTA00)\n"
- "2.4GHz\t\t- BCM4366 4?4 2.4/5G single chip 802.11ac SoC\n"
+ "2.4GHz\t\t- BCM4366 4\303\2274 2.4/5G single chip 802.11ac SoC\n"
  "Power Amp\t- Skyworks SE2623L 2.4 GHz power amp (x4)\n"
- "5GHz x 2\t- BCM4366 4?4 2.4/5G single chip 802.11ac SoC\n"
+ "5GHz x 2\t- BCM4366 4\303\2274 2.4/5G single chip 802.11ac SoC\n"
  "Power Amp\t- PLX Technology PEX8603 3-lane, 3-port PCIe switch\n"
  "Ports\t\t- 8 Ports, 1 WAN Ports\n"
  "Antennas\t- 8 Antennas\n"
@@ -34,7 +44,7 @@
  "Changes in v2:\n"
  " - Properly define mdio mux, internal mdio, external mdio, mii bus\n"
  " - Now we define usb3 phy as a mdio node connected to internal mdio\n"
- "   Thanks to work done by Rafa? Mi?ecki on the usb3 phy mdio driver\n"
+ "   Thanks to work done by Rafa\305\202 Mi\305\202ecki on the usb3 phy mdio driver\n"
  " - Define external SW as a mdio-mii node connected to external mdio\n"
  "\n"
  "[1] https://www.spinics.net/lists/arm-kernel/msg590992.html\n"
@@ -182,27 +192,27 @@
  "+\t\t#address-cells = <1>;\n"
  "+\t\t#size-cells = <0>;\n"
  "+\n"
- "+\t\tport at 1 {\n"
+ "+\t\tport@1 {\n"
  "+\t\t\treg = <1>;\n"
  "+\t\t\tlabel = \"lan7\";\n"
  "+\t\t};\n"
  "+\n"
- "+\t\tport at 2 {\n"
+ "+\t\tport@2 {\n"
  "+\t\t\treg = <2>;\n"
  "+\t\t\tlabel = \"lan4\";\n"
  "+\t\t};\n"
  "+\n"
- "+\t\tport at 3 {\n"
+ "+\t\tport@3 {\n"
  "+\t\t\treg = <3>;\n"
  "+\t\t\tlabel = \"lan8\";\n"
  "+\t\t};\n"
  "+\n"
- "+\t\tport at 4 {\n"
+ "+\t\tport@4 {\n"
  "+\t\t\treg = <4>;\n"
  "+\t\t\tlabel = \"wan\";\n"
  "+\t\t};\n"
  "+\n"
- "+\t\tport at 5 {\n"
+ "+\t\tport@5 {\n"
  "+\t\t\treg = <5>;\n"
  "+\t\t\tethernet = <&gmac0>;\n"
  "+\t\t\tlabel = \"cpu\";\n"
@@ -213,7 +223,7 @@
  "+\t\t\t};\n"
  "+\t\t};\n"
  "+\n"
- "+\t\tport at 7 {\n"
+ "+\t\tport@7 {\n"
  "+\t\t\treg = <7>;\n"
  "+\t\t\tethernet = <&gmac1>;\n"
  "+\t\t\tlabel = \"cpu\";\n"
@@ -224,7 +234,7 @@
  "+\t\t\t};\n"
  "+\t\t};\n"
  "+\n"
- "+\t\tport at 8 {\n"
+ "+\t\tport@8 {\n"
  "+\t\t\treg = <8>;\n"
  "+\t\t\tethernet = <&gmac2>;\n"
  "+\t\t\tlabel = \"cpu\";\n"
@@ -235,7 +245,7 @@
  "+\t\t\t};\n"
  "+\t\t};\n"
  "+\n"
- "+\t\tsw0_p0: port at 0 {\n"
+ "+\t\tsw0_p0: port@0 {\n"
  "+\t\t\treg = <0>;\n"
  "+\t\t\tlabel = \"extsw\";\n"
  "+\n"
@@ -250,7 +260,7 @@
  "+&mdio_mii {\n"
  "+\tstatus = \"okay\";\n"
  "+\n"
- "+\t\tswitch at 0  {\n"
+ "+\t\tswitch@0  {\n"
  "+\t\t\tcompatible = \"brcm,bcm53125\";\n"
  "+\t\t\t#address-cells = <1>;\n"
  "+\t\t\t#size-cells = <0>;\n"
@@ -263,32 +273,32 @@
  "+\t\t\t\t#address-cells = <1>;\n"
  "+\t\t\t\t#size-cells = <0>;\n"
  "+\n"
- "+\t\t\t\tport at 0 {\n"
+ "+\t\t\t\tport@0 {\n"
  "+\t\t\t\t\treg = <0>;\n"
  "+\t\t\t\t\tlabel = \"lan1\";\n"
  "+\t\t\t\t};\n"
  "+\n"
- "+\t\t\t\tport at 1 {\n"
+ "+\t\t\t\tport@1 {\n"
  "+\t\t\t\t\treg = <1>;\n"
  "+\t\t\t\t\tlabel = \"lan5\";\n"
  "+\t\t\t\t};\n"
  "+\n"
- "+\t\t\t\tport at 2 {\n"
+ "+\t\t\t\tport@2 {\n"
  "+\t\t\t\t\treg = <2>;\n"
  "+\t\t\t\t\tlabel = \"lan2\";\n"
  "+\t\t\t\t};\n"
  "+\n"
- "+\t\t\t\tport at 3 {\n"
+ "+\t\t\t\tport@3 {\n"
  "+\t\t\t\t\treg = <3>;\n"
  "+\t\t\t\t\tlabel = \"lan6\";\n"
  "+\t\t\t\t};\n"
  "+\n"
- "+\t\t\t\tport at 4 {\n"
+ "+\t\t\t\tport@4 {\n"
  "+\t\t\t\t\treg = <4>;\n"
  "+\t\t\t\t\tlabel = \"lan3\";\n"
  "+\t\t\t\t};\n"
  "+\n"
- "+\t\t\t\tsw1_p8: port at 8 {\n"
+ "+\t\t\t\tsw1_p8: port@8 {\n"
  "+\t\t\t\t\treg = <8>;\n"
  "+\t\t\t\t\tethernet = <&sw0_p0>;\n"
  "+\t\t\t\t\tlabel = \"cpu\";\n"
@@ -334,7 +344,7 @@
  "-\t\t#phy-cells = <0>;\n"
  "-\t};\n"
  "-\n"
- " \taxi at 18000000 {\n"
+ " \taxi@18000000 {\n"
  " \t\tcompatible = \"brcm,bus-axi\";\n"
  " \t\treg = <0x18000000 0x1000>;\n"
  "@@ -359,7 +352,55 @@\n"
@@ -351,12 +361,12 @@
  "+\t\treg = <0x18003000 0x4>;\n"
  "+\t\tmux-mask = <0x200>;\n"
  "+\n"
- "+\t\tmdio_int: mdio at 0 {\t\t/* BIT(9) = 0 => internal mdio */\n"
+ "+\t\tmdio_int: mdio@0 {\t\t/* BIT(9) = 0 => internal mdio */\n"
  "+\t\t\treg = <0x0>;\n"
  "+\t\t\t#address-cells = <1>;\n"
  "+\t\t\t#size-cells = <0>;\n"
  "+\n"
- "+\t\t\tusb3_phy: usb3-phy at 10 {\n"
+ "+\t\t\tusb3_phy: usb3-phy@10 {\n"
  "+\t\t\t\tcompatible = \"brcm,ns-ax-usb3-phy\";\n"
  "+\t\t\t\treg = <0x10>;\n"
  "+\t\t\t\tusb3-dmp-syscon = <&usb3_dmp>;\n"
@@ -364,7 +374,7 @@
  "+\t\t\t};\n"
  "+\t\t};\n"
  "+\n"
- "+\t\tmdio_ext: mdio at 200 {\t\t/* BIT(9) = 1 => external mdio */\n"
+ "+\t\tmdio_ext: mdio@200 {\t\t/* BIT(9) = 1 => external mdio */\n"
  "+\t\t\treg = <0x200>;\n"
  "+\t\t\t#address-cells = <1>;\n"
  "+\t\t\t#size-cells = <0>;\n"
@@ -381,19 +391,25 @@
  "+\t\tmux-mask = <0xc0>;\t\t/* BIT(6) = mdc, BIT(7) = mdio */\n"
  " \t\tstatus = \"disabled\";\n"
  "+\n"
- "+\t\tmdio_mii: mdio-mii at 0 {\n"
+ "+\t\tmdio_mii: mdio-mii@0 {\n"
  "+\t\t\treg = <0x0>;\t\t/* Enable mii function */\n"
  "+\t\t\t#address-cells = <1>;\n"
  "+\t\t\t#size-cells = <0>;\n"
  "+\t\t};\n"
  "+\t};\n"
  "+\n"
- "+\tusb3_dmp: syscon at 18105000 {\n"
+ "+\tusb3_dmp: syscon@18105000 {\n"
  "+\t\treg = <0x18105000 0x1000>;\n"
  " \t};\n"
  " \n"
- " \ti2c0: i2c at 18009000 {\n"
+ " \ti2c0: i2c@18009000 {\n"
  "-- \n"
- 2.9.3
+ "2.9.3\n"
+ "\n"
+ "\n"
+ "_______________________________________________\n"
+ "linux-arm-kernel mailing list\n"
+ "linux-arm-kernel@lists.infradead.org\n"
+ http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
 
-62d32c4e7a785a9615374532f8c254292cc6371dd45e979495cba65795e2259c
+0d20f37dc6a5cb20036c50ace7f45b0df2ac0a6e7a5aa7086f64cae788ed5d25
