From: Greg KH <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org,
Andrew Morton <akpm@linux-foundation.org>,
torvalds@linux-foundation.org, stable@vger.kernel.org
Cc: lwn@lwn.net, Jiri Slaby <jslaby@suse.cz>
Subject: Re: Linux 4.14.23
Date: Wed, 28 Feb 2018 13:10:03 +0100 [thread overview]
Message-ID: <20180228121003.GB16637@kroah.com> (raw)
In-Reply-To: <20180228120959.GA16637@kroah.com>
diff --git a/Makefile b/Makefile
index 03d41143900c..169f3199274f 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
VERSION = 4
PATCHLEVEL = 14
-SUBLEVEL = 22
+SUBLEVEL = 23
EXTRAVERSION =
NAME = Petit Gorille
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index 582142ae92e1..345d4e521191 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -175,9 +175,11 @@ static const struct arm64_ftr_bits ftr_id_aa64mmfr2[] = {
};
static const struct arm64_ftr_bits ftr_ctr[] = {
- ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_EXACT, 31, 1, 1), /* RAO */
+ ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_EXACT, 31, 1, 1), /* RES1 */
+ ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, 29, 1, 1), /* DIC */
+ ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, 28, 1, 1), /* IDC */
ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_HIGHER_SAFE, 24, 4, 0), /* CWG */
- ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, 20, 4, 0), /* ERG */
+ ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_HIGHER_SAFE, 20, 4, 0), /* ERG */
ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, 16, 4, 1), /* DminLine */
/*
* Linux can handle differing I-cache policies. Userspace JITs will
diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
index 8383af15a759..4fc0e958770b 100644
--- a/arch/arm64/kernel/traps.c
+++ b/arch/arm64/kernel/traps.c
@@ -56,7 +56,7 @@ static const char *handler[]= {
"Error"
};
-int show_unhandled_signals = 1;
+int show_unhandled_signals = 0;
/*
* Dump out the contents of some kernel memory nicely...
@@ -573,14 +573,6 @@ asmlinkage long do_ni_syscall(struct pt_regs *regs)
}
#endif
- if (show_unhandled_signals_ratelimited()) {
- pr_info("%s[%d]: syscall %d\n", current->comm,
- task_pid_nr(current), regs->syscallno);
- dump_instr("", regs);
- if (user_mode(regs))
- __show_regs(regs);
- }
-
return sys_ni_syscall();
}
diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S
index 329a1c43365e..139320a7f7a2 100644
--- a/arch/arm64/mm/proc.S
+++ b/arch/arm64/mm/proc.S
@@ -155,7 +155,7 @@ ENDPROC(cpu_do_switch_mm)
.macro __idmap_cpu_set_reserved_ttbr1, tmp1, tmp2
adrp \tmp1, empty_zero_page
- msr ttbr1_el1, \tmp2
+ msr ttbr1_el1, \tmp1
isb
tlbi vmalle1
dsb nsh
diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig
index 0d9446c37ae8..498398d915c1 100644
--- a/arch/m32r/Kconfig
+++ b/arch/m32r/Kconfig
@@ -196,8 +196,8 @@ config TIMER_DIVIDE
default "128"
config CPU_BIG_ENDIAN
- bool "Generate big endian code"
- default n
+ bool
+ default !CPU_LITTLE_ENDIAN
config CPU_LITTLE_ENDIAN
bool "Generate little endian code"
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index 830ee7d42fa0..d269dd4b8279 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -36,16 +36,21 @@ endif
CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_DIV) += -mno-xl-soft-div
CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_BARREL) += -mxl-barrel-shift
CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR) += -mxl-pattern-compare
-CPUFLAGS-$(CONFIG_BIG_ENDIAN) += -mbig-endian
-CPUFLAGS-$(CONFIG_LITTLE_ENDIAN) += -mlittle-endian
+
+ifdef CONFIG_CPU_BIG_ENDIAN
+KBUILD_CFLAGS += -mbig-endian
+KBUILD_AFLAGS += -mbig-endian
+LD += -EB
+else
+KBUILD_CFLAGS += -mlittle-endian
+KBUILD_AFLAGS += -mlittle-endian
+LD += -EL
+endif
CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER))
# r31 holds current when in kernel mode
-KBUILD_CFLAGS += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2)
-
-LDFLAGS :=
-LDFLAGS_vmlinux :=
+KBUILD_CFLAGS += -ffixed-r31 $(CPUFLAGS-y) $(CPUFLAGS-1) $(CPUFLAGS-2)
head-y := arch/microblaze/kernel/head.o
libs-y += arch/microblaze/lib/
diff --git a/arch/mips/boot/Makefile b/arch/mips/boot/Makefile
index 1bd5c4f00d19..c22da16d67b8 100644
--- a/arch/mips/boot/Makefile
+++ b/arch/mips/boot/Makefile
@@ -126,6 +126,7 @@ $(obj)/vmlinux.its.S: $(addprefix $(srctree)/arch/mips/$(PLATFORM)/,$(ITS_INPUTS
quiet_cmd_cpp_its_S = ITS $@
cmd_cpp_its_S = $(CPP) $(cpp_flags) -P -C -o $@ $< \
+ -D__ASSEMBLY__ \
-DKERNEL_NAME="\"Linux $(KERNELRELEASE)\"" \
-DVMLINUX_BINARY="\"$(3)\"" \
-DVMLINUX_COMPRESSION="\"$(2)\"" \
diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h
index 49691331ada4..08ec0762ca50 100644
--- a/arch/mips/include/asm/compat.h
+++ b/arch/mips/include/asm/compat.h
@@ -86,7 +86,6 @@ struct compat_flock {
compat_off_t l_len;
s32 l_sysid;
compat_pid_t l_pid;
- short __unused;
s32 pad[4];
};
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index ffdbc4836b4f..abff76bda9e6 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -460,7 +460,7 @@ static int nmi_setup(void)
goto fail;
for_each_possible_cpu(cpu) {
- if (!cpu)
+ if (!IS_ENABLED(CONFIG_SMP) || !cpu)
continue;
memcpy(per_cpu(cpu_msrs, cpu).counters,
diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c
index 720fe4e8b497..8dad076661fc 100644
--- a/arch/xtensa/mm/init.c
+++ b/arch/xtensa/mm/init.c
@@ -79,19 +79,75 @@ void __init zones_init(void)
free_area_init_node(0, zones_size, ARCH_PFN_OFFSET, NULL);
}
+#ifdef CONFIG_HIGHMEM
+static void __init free_area_high(unsigned long pfn, unsigned long end)
+{
+ for (; pfn < end; pfn++)
+ free_highmem_page(pfn_to_page(pfn));
+}
+
+static void __init free_highpages(void)
+{
+ unsigned long max_low = max_low_pfn;
+ struct memblock_region *mem, *res;
+
+ reset_all_zones_managed_pages();
+ /* set highmem page free */
+ for_each_memblock(memory, mem) {
+ unsigned long start = memblock_region_memory_base_pfn(mem);
+ unsigned long end = memblock_region_memory_end_pfn(mem);
+
+ /* Ignore complete lowmem entries */
+ if (end <= max_low)
+ continue;
+
+ if (memblock_is_nomap(mem))
+ continue;
+
+ /* Truncate partial highmem entries */
+ if (start < max_low)
+ start = max_low;
+
+ /* Find and exclude any reserved regions */
+ for_each_memblock(reserved, res) {
+ unsigned long res_start, res_end;
+
+ res_start = memblock_region_reserved_base_pfn(res);
+ res_end = memblock_region_reserved_end_pfn(res);
+
+ if (res_end < start)
+ continue;
+ if (res_start < start)
+ res_start = start;
+ if (res_start > end)
+ res_start = end;
+ if (res_end > end)
+ res_end = end;
+ if (res_start != start)
+ free_area_high(start, res_start);
+ start = res_end;
+ if (start == end)
+ break;
+ }
+
+ /* And now free anything which remains */
+ if (start < end)
+ free_area_high(start, end);
+ }
+}
+#else
+static void __init free_highpages(void)
+{
+}
+#endif
+
/*
* Initialize memory pages.
*/
void __init mem_init(void)
{
-#ifdef CONFIG_HIGHMEM
- unsigned long tmp;
-
- reset_all_zones_managed_pages();
- for (tmp = max_low_pfn; tmp < max_pfn; tmp++)
- free_highmem_page(pfn_to_page(tmp));
-#endif
+ free_highpages();
max_mapnr = max_pfn - ARCH_PFN_OFFSET;
high_memory = (void *)__va(max_low_pfn << PAGE_SHIFT);
diff --git a/crypto/asymmetric_keys/pkcs7_verify.c b/crypto/asymmetric_keys/pkcs7_verify.c
index 986033e64a83..a18295651077 100644
--- a/crypto/asymmetric_keys/pkcs7_verify.c
+++ b/crypto/asymmetric_keys/pkcs7_verify.c
@@ -273,7 +273,7 @@ static int pkcs7_verify_sig_chain(struct pkcs7_message *pkcs7,
sinfo->index);
return 0;
}
- ret = public_key_verify_signature(p->pub, p->sig);
+ ret = public_key_verify_signature(p->pub, x509->sig);
if (ret < 0)
return ret;
x509->signer = p;
@@ -369,8 +369,7 @@ static int pkcs7_verify_one(struct pkcs7_message *pkcs7,
*
* (*) -EBADMSG if some part of the message was invalid, or:
*
- * (*) 0 if no signature chains were found to be blacklisted or to contain
- * unsupported crypto, or:
+ * (*) 0 if a signature chain passed verification, or:
*
* (*) -EKEYREJECTED if a blacklisted key was encountered, or:
*
@@ -426,8 +425,11 @@ int pkcs7_verify(struct pkcs7_message *pkcs7,
for (sinfo = pkcs7->signed_infos; sinfo; sinfo = sinfo->next) {
ret = pkcs7_verify_one(pkcs7, sinfo);
- if (sinfo->blacklisted && actual_ret == -ENOPKG)
- actual_ret = -EKEYREJECTED;
+ if (sinfo->blacklisted) {
+ if (actual_ret == -ENOPKG)
+ actual_ret = -EKEYREJECTED;
+ continue;
+ }
if (ret < 0) {
if (ret == -ENOPKG) {
sinfo->unsupported_crypto = true;
diff --git a/crypto/asymmetric_keys/public_key.c b/crypto/asymmetric_keys/public_key.c
index 3cd6e12cfc46..d1af69d2ff85 100644
--- a/crypto/asymmetric_keys/public_key.c
+++ b/crypto/asymmetric_keys/public_key.c
@@ -93,9 +93,11 @@ int public_key_verify_signature(const struct public_key *pkey,
BUG_ON(!pkey);
BUG_ON(!sig);
- BUG_ON(!sig->digest);
BUG_ON(!sig->s);
+ if (!sig->digest)
+ return -ENOPKG;
+
alg_name = sig->pkey_algo;
if (strcmp(sig->pkey_algo, "rsa") == 0) {
/* The data wangled by the RSA algorithm is typically padded
diff --git a/crypto/asymmetric_keys/restrict.c b/crypto/asymmetric_keys/restrict.c
index 86fb68508952..7c93c7728454 100644
--- a/crypto/asymmetric_keys/restrict.c
+++ b/crypto/asymmetric_keys/restrict.c
@@ -67,8 +67,9 @@ __setup("ca_keys=", ca_keys_setup);
*
* Returns 0 if the new certificate was accepted, -ENOKEY if we couldn't find a
* matching parent certificate in the trusted list, -EKEYREJECTED if the
- * signature check fails or the key is blacklisted and some other error if
- * there is a matching certificate but the signature check cannot be performed.
+ * signature check fails or the key is blacklisted, -ENOPKG if the signature
+ * uses unsupported crypto, or some other error if there is a matching
+ * certificate but the signature check cannot be performed.
*/
int restrict_link_by_signature(struct key *dest_keyring,
const struct key_type *type,
@@ -88,6 +89,8 @@ int restrict_link_by_signature(struct key *dest_keyring,
return -EOPNOTSUPP;
sig = payload->data[asym_auth];
+ if (!sig)
+ return -ENOPKG;
if (!sig->auth_ids[0] && !sig->auth_ids[1])
return -ENOKEY;
@@ -139,6 +142,8 @@ static int key_or_keyring_common(struct key *dest_keyring,
return -EOPNOTSUPP;
sig = payload->data[asym_auth];
+ if (!sig)
+ return -ENOPKG;
if (!sig->auth_ids[0] && !sig->auth_ids[1])
return -ENOKEY;
@@ -222,9 +227,9 @@ static int key_or_keyring_common(struct key *dest_keyring,
*
* Returns 0 if the new certificate was accepted, -ENOKEY if we
* couldn't find a matching parent certificate in the trusted list,
- * -EKEYREJECTED if the signature check fails, and some other error if
- * there is a matching certificate but the signature check cannot be
- * performed.
+ * -EKEYREJECTED if the signature check fails, -ENOPKG if the signature uses
+ * unsupported crypto, or some other error if there is a matching certificate
+ * but the signature check cannot be performed.
*/
int restrict_link_by_key_or_keyring(struct key *dest_keyring,
const struct key_type *type,
@@ -249,9 +254,9 @@ int restrict_link_by_key_or_keyring(struct key *dest_keyring,
*
* Returns 0 if the new certificate was accepted, -ENOKEY if we
* couldn't find a matching parent certificate in the trusted list,
- * -EKEYREJECTED if the signature check fails, and some other error if
- * there is a matching certificate but the signature check cannot be
- * performed.
+ * -EKEYREJECTED if the signature check fails, -ENOPKG if the signature uses
+ * unsupported crypto, or some other error if there is a matching certificate
+ * but the signature check cannot be performed.
*/
int restrict_link_by_key_or_keyring_chain(struct key *dest_keyring,
const struct key_type *type,
diff --git a/drivers/extcon/extcon-intel-int3496.c b/drivers/extcon/extcon-intel-int3496.c
index 1a45e745717d..a6661097b2f9 100644
--- a/drivers/extcon/extcon-intel-int3496.c
+++ b/drivers/extcon/extcon-intel-int3496.c
@@ -153,8 +153,9 @@ static int int3496_probe(struct platform_device *pdev)
return ret;
}
- /* queue initial processing of id-pin */
+ /* process id-pin so that we start with the right status */
queue_delayed_work(system_wq, &data->work, 0);
+ flush_delayed_work(&data->work);
platform_set_drvdata(pdev, data);
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c
index c13c51af0b68..c53095b3b0fb 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c
@@ -14,6 +14,16 @@
#include "amd_acpi.h"
+#define AMDGPU_PX_QUIRK_FORCE_ATPX (1 << 0)
+
+struct amdgpu_px_quirk {
+ u32 chip_vendor;
+ u32 chip_device;
+ u32 subsys_vendor;
+ u32 subsys_device;
+ u32 px_quirk_flags;
+};
+
struct amdgpu_atpx_functions {
bool px_params;
bool power_cntl;
@@ -35,6 +45,7 @@ struct amdgpu_atpx {
static struct amdgpu_atpx_priv {
bool atpx_detected;
bool bridge_pm_usable;
+ unsigned int quirks;
/* handle for device - and atpx */
acpi_handle dhandle;
acpi_handle other_handle;
@@ -205,13 +216,19 @@ static int amdgpu_atpx_validate(struct amdgpu_atpx *atpx)
atpx->is_hybrid = false;
if (valid_bits & ATPX_MS_HYBRID_GFX_SUPPORTED) {
- printk("ATPX Hybrid Graphics\n");
- /*
- * Disable legacy PM methods only when pcie port PM is usable,
- * otherwise the device might fail to power off or power on.
- */
- atpx->functions.power_cntl = !amdgpu_atpx_priv.bridge_pm_usable;
- atpx->is_hybrid = true;
+ if (amdgpu_atpx_priv.quirks & AMDGPU_PX_QUIRK_FORCE_ATPX) {
+ printk("ATPX Hybrid Graphics, forcing to ATPX\n");
+ atpx->functions.power_cntl = true;
+ atpx->is_hybrid = false;
+ } else {
+ printk("ATPX Hybrid Graphics\n");
+ /*
+ * Disable legacy PM methods only when pcie port PM is usable,
+ * otherwise the device might fail to power off or power on.
+ */
+ atpx->functions.power_cntl = !amdgpu_atpx_priv.bridge_pm_usable;
+ atpx->is_hybrid = true;
+ }
}
atpx->dgpu_req_power_for_displays = false;
@@ -547,6 +564,31 @@ static const struct vga_switcheroo_handler amdgpu_atpx_handler = {
.get_client_id = amdgpu_atpx_get_client_id,
};
+static const struct amdgpu_px_quirk amdgpu_px_quirk_list[] = {
+ /* HG _PR3 doesn't seem to work on this A+A weston board */
+ { 0x1002, 0x6900, 0x1002, 0x0124, AMDGPU_PX_QUIRK_FORCE_ATPX },
+ { 0x1002, 0x6900, 0x1028, 0x0812, AMDGPU_PX_QUIRK_FORCE_ATPX },
+ { 0x1002, 0x6900, 0x1028, 0x0813, AMDGPU_PX_QUIRK_FORCE_ATPX },
+ { 0, 0, 0, 0, 0 },
+};
+
+static void amdgpu_atpx_get_quirks(struct pci_dev *pdev)
+{
+ const struct amdgpu_px_quirk *p = amdgpu_px_quirk_list;
+
+ /* Apply PX quirks */
+ while (p && p->chip_device != 0) {
+ if (pdev->vendor == p->chip_vendor &&
+ pdev->device == p->chip_device &&
+ pdev->subsystem_vendor == p->subsys_vendor &&
+ pdev->subsystem_device == p->subsys_device) {
+ amdgpu_atpx_priv.quirks |= p->px_quirk_flags;
+ break;
+ }
+ ++p;
+ }
+}
+
/**
* amdgpu_atpx_detect - detect whether we have PX
*
@@ -570,6 +612,7 @@ static bool amdgpu_atpx_detect(void)
parent_pdev = pci_upstream_bridge(pdev);
d3_supported |= parent_pdev && parent_pdev->bridge_d3;
+ amdgpu_atpx_get_quirks(pdev);
}
while ((pdev = pci_get_class(PCI_CLASS_DISPLAY_OTHER << 8, pdev)) != NULL) {
@@ -579,6 +622,7 @@ static bool amdgpu_atpx_detect(void)
parent_pdev = pci_upstream_bridge(pdev);
d3_supported |= parent_pdev && parent_pdev->bridge_d3;
+ amdgpu_atpx_get_quirks(pdev);
}
if (has_atpx && vga_count == 2) {
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
index e630d918fefc..bc746a6e0ecc 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
@@ -2076,8 +2076,6 @@ int amdgpu_device_init(struct amdgpu_device *adev,
* ignore it */
vga_client_register(adev->pdev, adev, NULL, amdgpu_vga_set_decode);
- if (amdgpu_runtime_pm == 1)
- runtime = true;
if (amdgpu_device_is_px(ddev))
runtime = true;
if (!pci_is_thunderbolt_attached(adev->pdev))
diff --git a/drivers/gpu/drm/amd/amdgpu/si_dpm.c b/drivers/gpu/drm/amd/amdgpu/si_dpm.c
index d63873f3f574..a2aeb643ac51 100644
--- a/drivers/gpu/drm/amd/amdgpu/si_dpm.c
+++ b/drivers/gpu/drm/amd/amdgpu/si_dpm.c
@@ -3465,6 +3465,11 @@ static void si_apply_state_adjust_rules(struct amdgpu_device *adev,
(adev->pdev->device == 0x6667)) {
max_sclk = 75000;
}
+ if ((adev->pdev->revision == 0xC3) ||
+ (adev->pdev->device == 0x6665)) {
+ max_sclk = 60000;
+ max_mclk = 80000;
+ }
} else if (adev->asic_type == CHIP_OLAND) {
if ((adev->pdev->revision == 0xC7) ||
(adev->pdev->revision == 0x80) ||
diff --git a/drivers/gpu/drm/amd/amdgpu/soc15.c b/drivers/gpu/drm/amd/amdgpu/soc15.c
index 3e59c766722c..ff7d4827385e 100644
--- a/drivers/gpu/drm/amd/amdgpu/soc15.c
+++ b/drivers/gpu/drm/amd/amdgpu/soc15.c
@@ -661,8 +661,8 @@ static int soc15_common_early_init(void *handle)
AMD_CG_SUPPORT_MC_LS |
AMD_CG_SUPPORT_SDMA_MGCG |
AMD_CG_SUPPORT_SDMA_LS;
- adev->pg_flags = AMD_PG_SUPPORT_SDMA |
- AMD_PG_SUPPORT_MMHUB;
+ adev->pg_flags = AMD_PG_SUPPORT_SDMA;
+
adev->external_rev_id = 0x1;
break;
default:
diff --git a/drivers/gpu/drm/amd/amdgpu/vi.c b/drivers/gpu/drm/amd/amdgpu/vi.c
index 9ff69b90df36..4968b6bb9466 100644
--- a/drivers/gpu/drm/amd/amdgpu/vi.c
+++ b/drivers/gpu/drm/amd/amdgpu/vi.c
@@ -448,14 +448,19 @@ static bool vi_read_bios_from_rom(struct amdgpu_device *adev,
static void vi_detect_hw_virtualization(struct amdgpu_device *adev)
{
- uint32_t reg = RREG32(mmBIF_IOV_FUNC_IDENTIFIER);
- /* bit0: 0 means pf and 1 means vf */
- /* bit31: 0 means disable IOV and 1 means enable */
- if (reg & 1)
- adev->virt.caps |= AMDGPU_SRIOV_CAPS_IS_VF;
-
- if (reg & 0x80000000)
- adev->virt.caps |= AMDGPU_SRIOV_CAPS_ENABLE_IOV;
+ uint32_t reg = 0;
+
+ if (adev->asic_type == CHIP_TONGA ||
+ adev->asic_type == CHIP_FIJI) {
+ reg = RREG32(mmBIF_IOV_FUNC_IDENTIFIER);
+ /* bit0: 0 means pf and 1 means vf */
+ /* bit31: 0 means disable IOV and 1 means enable */
+ if (reg & 1)
+ adev->virt.caps |= AMDGPU_SRIOV_CAPS_IS_VF;
+
+ if (reg & 0x80000000)
+ adev->virt.caps |= AMDGPU_SRIOV_CAPS_ENABLE_IOV;
+ }
if (reg == 0) {
if (is_virtual_machine()) /* passthrough mode exclus sr-iov mode */
diff --git a/drivers/gpu/drm/cirrus/cirrus_mode.c b/drivers/gpu/drm/cirrus/cirrus_mode.c
index a4c4a465b385..130483f2cd7f 100644
--- a/drivers/gpu/drm/cirrus/cirrus_mode.c
+++ b/drivers/gpu/drm/cirrus/cirrus_mode.c
@@ -294,22 +294,7 @@ static void cirrus_crtc_prepare(struct drm_crtc *crtc)
{
}
-/*
- * This is called after a mode is programmed. It should reverse anything done
- * by the prepare function
- */
-static void cirrus_crtc_commit(struct drm_crtc *crtc)
-{
-}
-
-/*
- * The core can pass us a set of gamma values to program. We actually only
- * use this for 8-bit mode so can't perform smooth fades on deeper modes,
- * but it's a requirement that we provide the function
- */
-static int cirrus_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
- u16 *blue, uint32_t size,
- struct drm_modeset_acquire_ctx *ctx)
+static void cirrus_crtc_load_lut(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct cirrus_device *cdev = dev->dev_private;
@@ -317,7 +302,7 @@ static int cirrus_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
int i;
if (!crtc->enabled)
- return 0;
+ return;
r = crtc->gamma_store;
g = r + crtc->gamma_size;
@@ -330,6 +315,27 @@ static int cirrus_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
WREG8(PALETTE_DATA, *g++ >> 8);
WREG8(PALETTE_DATA, *b++ >> 8);
}
+}
+
+/*
+ * This is called after a mode is programmed. It should reverse anything done
+ * by the prepare function
+ */
+static void cirrus_crtc_commit(struct drm_crtc *crtc)
+{
+ cirrus_crtc_load_lut(crtc);
+}
+
+/*
+ * The core can pass us a set of gamma values to program. We actually only
+ * use this for 8-bit mode so can't perform smooth fades on deeper modes,
+ * but it's a requirement that we provide the function
+ */
+static int cirrus_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
+ u16 *blue, uint32_t size,
+ struct drm_modeset_acquire_ctx *ctx)
+{
+ cirrus_crtc_load_lut(crtc);
return 0;
}
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index fc7946eb6665..d52c9758d8cf 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -111,6 +111,9 @@ static const struct edid_quirk {
/* AEO model 0 reports 8 bpc, but is a 6 bpc panel */
{ "AEO", 0, EDID_QUIRK_FORCE_6BPC },
+ /* CPT panel of Asus UX303LA reports 8 bpc, but is a 6 bpc panel */
+ { "CPT", 0x17df, EDID_QUIRK_FORCE_6BPC },
+
/* Belinea 10 15 55 */
{ "MAX", 1516, EDID_QUIRK_PREFER_LARGE_60 },
{ "MAX", 0x77e, EDID_QUIRK_PREFER_LARGE_60 },
diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c
index 61a1c8ea74bc..1acf3b1479a1 100644
--- a/drivers/gpu/drm/drm_mm.c
+++ b/drivers/gpu/drm/drm_mm.c
@@ -834,9 +834,24 @@ struct drm_mm_node *drm_mm_scan_color_evict(struct drm_mm_scan *scan)
if (!mm->color_adjust)
return NULL;
- hole = list_first_entry(&mm->hole_stack, typeof(*hole), hole_stack);
- hole_start = __drm_mm_hole_node_start(hole);
- hole_end = hole_start + hole->hole_size;
+ /*
+ * The hole found during scanning should ideally be the first element
+ * in the hole_stack list, but due to side-effects in the driver it
+ * may not be.
+ */
+ list_for_each_entry(hole, &mm->hole_stack, hole_stack) {
+ hole_start = __drm_mm_hole_node_start(hole);
+ hole_end = hole_start + hole->hole_size;
+
+ if (hole_start <= scan->hit_start &&
+ hole_end >= scan->hit_end)
+ break;
+ }
+
+ /* We should only be called after we found the hole previously */
+ DRM_MM_BUG_ON(&hole->hole_stack == &mm->hole_stack);
+ if (unlikely(&hole->hole_stack == &mm->hole_stack))
+ return NULL;
DRM_MM_BUG_ON(hole_start > scan->hit_start);
DRM_MM_BUG_ON(hole_end < scan->hit_end);
diff --git a/drivers/gpu/drm/i915/intel_breadcrumbs.c b/drivers/gpu/drm/i915/intel_breadcrumbs.c
index 4e00e5cb9fa1..5095c095da04 100644
--- a/drivers/gpu/drm/i915/intel_breadcrumbs.c
+++ b/drivers/gpu/drm/i915/intel_breadcrumbs.c
@@ -541,29 +541,16 @@ void intel_engine_remove_wait(struct intel_engine_cs *engine,
spin_unlock_irq(&b->rb_lock);
}
-static bool signal_valid(const struct drm_i915_gem_request *request)
-{
- return intel_wait_check_request(&request->signaling.wait, request);
-}
-
static bool signal_complete(const struct drm_i915_gem_request *request)
{
if (!request)
return false;
- /* If another process served as the bottom-half it may have already
- * signalled that this wait is already completed.
- */
- if (intel_wait_complete(&request->signaling.wait))
- return signal_valid(request);
-
- /* Carefully check if the request is complete, giving time for the
+ /*
+ * Carefully check if the request is complete, giving time for the
* seqno to be visible or if the GPU hung.
*/
- if (__i915_request_irq_complete(request))
- return true;
-
- return false;
+ return __i915_request_irq_complete(request);
}
static struct drm_i915_gem_request *to_signaler(struct rb_node *rb)
@@ -606,9 +593,13 @@ static int intel_breadcrumbs_signaler(void *arg)
request = i915_gem_request_get_rcu(request);
rcu_read_unlock();
if (signal_complete(request)) {
- local_bh_disable();
- dma_fence_signal(&request->fence);
- local_bh_enable(); /* kick start the tasklets */
+ if (!test_bit(DMA_FENCE_FLAG_SIGNALED_BIT,
+ &request->fence.flags)) {
+ local_bh_disable();
+ dma_fence_signal(&request->fence);
+ GEM_BUG_ON(!i915_gem_request_completed(request));
+ local_bh_enable(); /* kick start the tasklets */
+ }
spin_lock_irq(&b->rb_lock);
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 5744eb729d24..ca2fbe56635a 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -2716,6 +2716,9 @@ static const struct hid_device_id hid_ignore_list[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MICROCASSYTIME) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MICROCASSYTEMPERATURE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MICROCASSYPH) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POWERANALYSERCASSY) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CONVERTERCONTROLLERCASSY) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MACHINETESTCASSY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_JWM) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_DMMP) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_UMIP) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index be2e005c3c51..ff539c0b4637 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -634,6 +634,9 @@
#define USB_DEVICE_ID_LD_MICROCASSYTIME 0x1033
#define USB_DEVICE_ID_LD_MICROCASSYTEMPERATURE 0x1035
#define USB_DEVICE_ID_LD_MICROCASSYPH 0x1038
+#define USB_DEVICE_ID_LD_POWERANALYSERCASSY 0x1040
+#define USB_DEVICE_ID_LD_CONVERTERCONTROLLERCASSY 0x1042
+#define USB_DEVICE_ID_LD_MACHINETESTCASSY 0x1043
#define USB_DEVICE_ID_LD_JWM 0x1080
#define USB_DEVICE_ID_LD_DMMP 0x1081
#define USB_DEVICE_ID_LD_UMIP 0x1090
diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c
index cd07a69e2e93..44deae78913e 100644
--- a/drivers/i2c/busses/i2c-bcm2835.c
+++ b/drivers/i2c/busses/i2c-bcm2835.c
@@ -50,6 +50,9 @@
#define BCM2835_I2C_S_CLKT BIT(9)
#define BCM2835_I2C_S_LEN BIT(10) /* Fake bit for SW error reporting */
+#define BCM2835_I2C_FEDL_SHIFT 16
+#define BCM2835_I2C_REDL_SHIFT 0
+
#define BCM2835_I2C_CDIV_MIN 0x0002
#define BCM2835_I2C_CDIV_MAX 0xFFFE
@@ -81,7 +84,7 @@ static inline u32 bcm2835_i2c_readl(struct bcm2835_i2c_dev *i2c_dev, u32 reg)
static int bcm2835_i2c_set_divider(struct bcm2835_i2c_dev *i2c_dev)
{
- u32 divider;
+ u32 divider, redl, fedl;
divider = DIV_ROUND_UP(clk_get_rate(i2c_dev->clk),
i2c_dev->bus_clk_rate);
@@ -100,6 +103,22 @@ static int bcm2835_i2c_set_divider(struct bcm2835_i2c_dev *i2c_dev)
bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DIV, divider);
+ /*
+ * Number of core clocks to wait after falling edge before
+ * outputting the next data bit. Note that both FEDL and REDL
+ * can't be greater than CDIV/2.
+ */
+ fedl = max(divider / 16, 1u);
+
+ /*
+ * Number of core clocks to wait after rising edge before
+ * sampling the next incoming data bit.
+ */
+ redl = max(divider / 4, 1u);
+
+ bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DEL,
+ (fedl << BCM2835_I2C_FEDL_SHIFT) |
+ (redl << BCM2835_I2C_REDL_SHIFT));
return 0;
}
diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index 418c233075d3..13e849bf9aa0 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -207,7 +207,7 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
i2c_dw_disable_int(dev);
/* Enable the adapter */
- __i2c_dw_enable(dev, true);
+ __i2c_dw_enable_and_wait(dev, true);
/* Clear and enable interrupts */
dw_readl(dev, DW_IC_CLR_INTR);
diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
index 172753b14a4f..04be8bd951be 100644
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -764,8 +764,6 @@ static int stm32h7_adc_enable(struct stm32_adc *adc)
int ret;
u32 val;
- /* Clear ADRDY by writing one, then enable ADC */
- stm32_adc_set_bits(adc, STM32H7_ADC_ISR, STM32H7_ADRDY);
stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_ADEN);
/* Poll for ADRDY to be set (after adc startup time) */
@@ -773,8 +771,11 @@ static int stm32h7_adc_enable(struct stm32_adc *adc)
val & STM32H7_ADRDY,
100, STM32_ADC_TIMEOUT_US);
if (ret) {
- stm32_adc_clr_bits(adc, STM32H7_ADC_CR, STM32H7_ADEN);
+ stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_ADDIS);
dev_err(&indio_dev->dev, "Failed to enable ADC\n");
+ } else {
+ /* Clear ADRDY by writing one */
+ stm32_adc_set_bits(adc, STM32H7_ADC_ISR, STM32H7_ADRDY);
}
return ret;
diff --git a/drivers/iio/imu/adis_trigger.c b/drivers/iio/imu/adis_trigger.c
index f53e9a803a0e..93b99bd93738 100644
--- a/drivers/iio/imu/adis_trigger.c
+++ b/drivers/iio/imu/adis_trigger.c
@@ -47,6 +47,10 @@ int adis_probe_trigger(struct adis *adis, struct iio_dev *indio_dev)
if (adis->trig == NULL)
return -ENOMEM;
+ adis->trig->dev.parent = &adis->spi->dev;
+ adis->trig->ops = &adis_trigger_ops;
+ iio_trigger_set_drvdata(adis->trig, adis);
+
ret = request_irq(adis->spi->irq,
&iio_trigger_generic_data_rdy_poll,
IRQF_TRIGGER_RISING,
@@ -55,9 +59,6 @@ int adis_probe_trigger(struct adis *adis, struct iio_dev *indio_dev)
if (ret)
goto error_free_trig;
- adis->trig->dev.parent = &adis->spi->dev;
- adis->trig->ops = &adis_trigger_ops;
- iio_trigger_set_drvdata(adis->trig, adis);
ret = iio_trigger_register(adis->trig);
indio_dev->trig = iio_trigger_get(adis->trig);
diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c
index d2b465140a6b..78482d456c3b 100644
--- a/drivers/iio/industrialio-buffer.c
+++ b/drivers/iio/industrialio-buffer.c
@@ -175,7 +175,7 @@ unsigned int iio_buffer_poll(struct file *filp,
struct iio_dev *indio_dev = filp->private_data;
struct iio_buffer *rb = indio_dev->buffer;
- if (!indio_dev->info)
+ if (!indio_dev->info || rb == NULL)
return 0;
poll_wait(filp, &rb->pollq, wait);
diff --git a/drivers/iio/proximity/Kconfig b/drivers/iio/proximity/Kconfig
index ae070950f920..c03de24d3c51 100644
--- a/drivers/iio/proximity/Kconfig
+++ b/drivers/iio/proximity/Kconfig
@@ -58,6 +58,8 @@ config SX9500
config SRF08
tristate "Devantech SRF02/SRF08/SRF10 ultrasonic ranger sensor"
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
depends on I2C
help
Say Y here to build a driver for Devantech SRF02/SRF08/SRF10
diff --git a/drivers/infiniband/core/rdma_core.c b/drivers/infiniband/core/rdma_core.c
index 85b5ee4defa4..4e1f76730855 100644
--- a/drivers/infiniband/core/rdma_core.c
+++ b/drivers/infiniband/core/rdma_core.c
@@ -196,7 +196,15 @@ static struct ib_uobject *lookup_get_idr_uobject(const struct uverbs_obj_type *t
goto free;
}
- uverbs_uobject_get(uobj);
+ /*
+ * The idr_find is guaranteed to return a pointer to something that
+ * isn't freed yet, or NULL, as the free after idr_remove goes through
+ * kfree_rcu(). However the object may still have been released and
+ * kfree() could be called at any time.
+ */
+ if (!kref_get_unless_zero(&uobj->ref))
+ uobj = ERR_PTR(-ENOENT);
+
free:
rcu_read_unlock();
return uobj;
diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c
index 93c1a57dbff1..186dce6bba8f 100644
--- a/drivers/infiniband/core/uverbs_cmd.c
+++ b/drivers/infiniband/core/uverbs_cmd.c
@@ -565,9 +565,10 @@ ssize_t ib_uverbs_open_xrcd(struct ib_uverbs_file *file,
if (f.file)
fdput(f);
+ mutex_unlock(&file->device->xrcd_tree_mutex);
+
uobj_alloc_commit(&obj->uobject);
- mutex_unlock(&file->device->xrcd_tree_mutex);
return in_len;
err_copy:
@@ -606,10 +607,8 @@ ssize_t ib_uverbs_close_xrcd(struct ib_uverbs_file *file,
uobj = uobj_get_write(uobj_get_type(xrcd), cmd.xrcd_handle,
file->ucontext);
- if (IS_ERR(uobj)) {
- mutex_unlock(&file->device->xrcd_tree_mutex);
+ if (IS_ERR(uobj))
return PTR_ERR(uobj);
- }
ret = uobj_remove_commit(uobj);
return ret ?: in_len;
@@ -1982,8 +1981,15 @@ static int modify_qp(struct ib_uverbs_file *file,
goto release_qp;
}
+ if ((cmd->base.attr_mask & IB_QP_AV) &&
+ !rdma_is_port_valid(qp->device, cmd->base.dest.port_num)) {
+ ret = -EINVAL;
+ goto release_qp;
+ }
+
if ((cmd->base.attr_mask & IB_QP_ALT_PATH) &&
- !rdma_is_port_valid(qp->device, cmd->base.alt_port_num)) {
+ (!rdma_is_port_valid(qp->device, cmd->base.alt_port_num) ||
+ !rdma_is_port_valid(qp->device, cmd->base.alt_dest.port_num))) {
ret = -EINVAL;
goto release_qp;
}
diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c
index dc2aed6fb21b..0f70ff91276e 100644
--- a/drivers/infiniband/core/uverbs_main.c
+++ b/drivers/infiniband/core/uverbs_main.c
@@ -647,12 +647,21 @@ static int verify_command_mask(struct ib_device *ib_dev, __u32 command)
return -1;
}
+static bool verify_command_idx(u32 command, bool extended)
+{
+ if (extended)
+ return command < ARRAY_SIZE(uverbs_ex_cmd_table);
+
+ return command < ARRAY_SIZE(uverbs_cmd_table);
+}
+
static ssize_t ib_uverbs_write(struct file *filp, const char __user *buf,
size_t count, loff_t *pos)
{
struct ib_uverbs_file *file = filp->private_data;
struct ib_device *ib_dev;
struct ib_uverbs_cmd_hdr hdr;
+ bool extended_command;
__u32 command;
__u32 flags;
int srcu_key;
@@ -685,6 +694,15 @@ static ssize_t ib_uverbs_write(struct file *filp, const char __user *buf,
}
command = hdr.command & IB_USER_VERBS_CMD_COMMAND_MASK;
+ flags = (hdr.command &
+ IB_USER_VERBS_CMD_FLAGS_MASK) >> IB_USER_VERBS_CMD_FLAGS_SHIFT;
+
+ extended_command = flags & IB_USER_VERBS_CMD_FLAG_EXTENDED;
+ if (!verify_command_idx(command, extended_command)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
if (verify_command_mask(ib_dev, command)) {
ret = -EOPNOTSUPP;
goto out;
@@ -696,12 +714,8 @@ static ssize_t ib_uverbs_write(struct file *filp, const char __user *buf,
goto out;
}
- flags = (hdr.command &
- IB_USER_VERBS_CMD_FLAGS_MASK) >> IB_USER_VERBS_CMD_FLAGS_SHIFT;
-
if (!flags) {
- if (command >= ARRAY_SIZE(uverbs_cmd_table) ||
- !uverbs_cmd_table[command]) {
+ if (!uverbs_cmd_table[command]) {
ret = -EINVAL;
goto out;
}
@@ -722,8 +736,7 @@ static ssize_t ib_uverbs_write(struct file *filp, const char __user *buf,
struct ib_udata uhw;
size_t written_count = count;
- if (command >= ARRAY_SIZE(uverbs_ex_cmd_table) ||
- !uverbs_ex_cmd_table[command]) {
+ if (!uverbs_ex_cmd_table[command]) {
ret = -ENOSYS;
goto out;
}
diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index 3b35271114ee..ae9ff72e83ee 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -660,7 +660,7 @@ static void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
* Ensure that stores to Normal memory are visible to the
* other CPUs before issuing the IPI.
*/
- smp_wmb();
+ wmb();
for_each_cpu(cpu, mask) {
unsigned long cluster_id = cpu_logical_map(cpu) & ~0xffUL;
diff --git a/drivers/irqchip/irq-mips-gic.c b/drivers/irqchip/irq-mips-gic.c
index c90976d7e53c..a9f300efce54 100644
--- a/drivers/irqchip/irq-mips-gic.c
+++ b/drivers/irqchip/irq-mips-gic.c
@@ -427,8 +427,6 @@ static int gic_shared_irq_domain_map(struct irq_domain *d, unsigned int virq,
spin_lock_irqsave(&gic_lock, flags);
write_gic_map_pin(intr, GIC_MAP_PIN_MAP_TO_PIN | gic_cpu_pin);
write_gic_map_vp(intr, BIT(mips_cm_vp_id(cpu)));
- gic_clear_pcpu_masks(intr);
- set_bit(intr, per_cpu_ptr(pcpu_masks, cpu));
irq_data_update_effective_affinity(data, cpumask_of(cpu));
spin_unlock_irqrestore(&gic_lock, flags);
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index b65ce26ff72f..1802debbd3c7 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -2632,7 +2632,6 @@ void t4_get_regs(struct adapter *adap, void *buf, size_t buf_size)
}
#define EEPROM_STAT_ADDR 0x7bfc
-#define VPD_SIZE 0x800
#define VPD_BASE 0x400
#define VPD_BASE_OLD 0
#define VPD_LEN 1024
@@ -2670,15 +2669,6 @@ int t4_get_raw_vpd_params(struct adapter *adapter, struct vpd_params *p)
if (!vpd)
return -ENOMEM;
- /* We have two VPD data structures stored in the adapter VPD area.
- * By default, Linux calculates the size of the VPD area by traversing
- * the first VPD area at offset 0x0, so we need to tell the OS what
- * our real VPD size is.
- */
- ret = pci_set_vpd_size(adapter->pdev, VPD_SIZE);
- if (ret < 0)
- goto out;
-
/* Card information normally starts at VPD_BASE but early cards had
* it at 0.
*/
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 4c3feb96f391..d18824772f6c 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3412,22 +3412,29 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PORT_RIDGE,
static void quirk_chelsio_extend_vpd(struct pci_dev *dev)
{
- pci_set_vpd_size(dev, 8192);
-}
-
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x20, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x21, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x22, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x23, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x24, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x25, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x26, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x30, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x31, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x32, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x35, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x36, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x37, quirk_chelsio_extend_vpd);
+ int chip = (dev->device & 0xf000) >> 12;
+ int func = (dev->device & 0x0f00) >> 8;
+ int prod = (dev->device & 0x00ff) >> 0;
+
+ /*
+ * If this is a T3-based adapter, there's a 1KB VPD area at offset
+ * 0xc00 which contains the preferred VPD values. If this is a T4 or
+ * later based adapter, the special VPD is at offset 0x400 for the
+ * Physical Functions (the SR-IOV Virtual Functions have no VPD
+ * Capabilities). The PCI VPD Access core routines will normally
+ * compute the size of the VPD by parsing the VPD Data Structure at
+ * offset 0x000. This will result in silent failures when attempting
+ * to accesses these other VPD areas which are beyond those computed
+ * limits.
+ */
+ if (chip == 0x0 && prod >= 0x20)
+ pci_set_vpd_size(dev, 8192);
+ else if (chip >= 0x4 && func < 0x8)
+ pci_set_vpd_size(dev, 2048);
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID,
+ quirk_chelsio_extend_vpd);
#ifdef CONFIG_ACPI
/*
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.h b/drivers/scsi/ibmvscsi/ibmvfc.h
index 9a0696f68f37..b81a53c4a9a8 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.h
+++ b/drivers/scsi/ibmvscsi/ibmvfc.h
@@ -367,7 +367,7 @@ enum ibmvfc_fcp_rsp_info_codes {
};
struct ibmvfc_fcp_rsp_info {
- __be16 reserved;
+ u8 reserved[3];
u8 rsp_code;
u8 reserved2[4];
}__attribute__((packed, aligned (2)));
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index c05c4f877750..774c97bb1c08 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -225,6 +225,9 @@ static const struct usb_device_id usb_quirk_list[] = {
{ USB_DEVICE(0x1a0a, 0x0200), .driver_info =
USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL },
+ /* Corsair K70 RGB */
+ { USB_DEVICE(0x1b1c, 0x1b13), .driver_info = USB_QUIRK_DELAY_INIT },
+
/* Corsair Strafe RGB */
{ USB_DEVICE(0x1b1c, 0x1b20), .driver_info = USB_QUIRK_DELAY_INIT },
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 75e6cb044eb2..89fe53c846ef 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -884,7 +884,12 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
trb++;
trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
trace_dwc3_complete_trb(ep0, trb);
- ep0->trb_enqueue = 0;
+
+ if (r->direction)
+ dwc->eps[1]->trb_enqueue = 0;
+ else
+ dwc->eps[0]->trb_enqueue = 0;
+
dwc->ep0_bounced = false;
}
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 97e52c0d1a72..0ebdb313bb00 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2774,6 +2774,8 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
break;
}
+ dwc->eps[1]->endpoint.maxpacket = dwc->gadget.ep0->maxpacket;
+
/* Enable USB2 LPM Capability */
if ((dwc->revision > DWC3_REVISION_194A) &&
diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index c0491dd73f53..a9c9ab01592b 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -1856,44 +1856,20 @@ static int ffs_func_eps_enable(struct ffs_function *func)
spin_lock_irqsave(&func->ffs->eps_lock, flags);
while(count--) {
- struct usb_endpoint_descriptor *ds;
- struct usb_ss_ep_comp_descriptor *comp_desc = NULL;
- int needs_comp_desc = false;
- int desc_idx;
-
- if (ffs->gadget->speed == USB_SPEED_SUPER) {
- desc_idx = 2;
- needs_comp_desc = true;
- } else if (ffs->gadget->speed == USB_SPEED_HIGH)
- desc_idx = 1;
- else
- desc_idx = 0;
-
- /* fall-back to lower speed if desc missing for current speed */
- do {
- ds = ep->descs[desc_idx];
- } while (!ds && --desc_idx >= 0);
-
- if (!ds) {
- ret = -EINVAL;
- break;
- }
-
ep->ep->driver_data = ep;
- ep->ep->desc = ds;
- if (needs_comp_desc) {
- comp_desc = (struct usb_ss_ep_comp_descriptor *)(ds +
- USB_DT_ENDPOINT_SIZE);
- ep->ep->maxburst = comp_desc->bMaxBurst + 1;
- ep->ep->comp_desc = comp_desc;
+ ret = config_ep_by_speed(func->gadget, &func->function, ep->ep);
+ if (ret) {
+ pr_err("%s: config_ep_by_speed(%s) returned %d\n",
+ __func__, ep->ep->name, ret);
+ break;
}
ret = usb_ep_enable(ep->ep);
if (likely(!ret)) {
epfile->ep = ep;
- epfile->in = usb_endpoint_dir_in(ds);
- epfile->isoc = usb_endpoint_xfer_isoc(ds);
+ epfile->in = usb_endpoint_dir_in(ep->ep->desc);
+ epfile->isoc = usb_endpoint_xfer_isoc(ep->ep->desc);
} else {
break;
}
@@ -2980,10 +2956,8 @@ static int _ffs_func_bind(struct usb_configuration *c,
struct ffs_data *ffs = func->ffs;
const int full = !!func->ffs->fs_descs_count;
- const int high = gadget_is_dualspeed(func->gadget) &&
- func->ffs->hs_descs_count;
- const int super = gadget_is_superspeed(func->gadget) &&
- func->ffs->ss_descs_count;
+ const int high = !!func->ffs->hs_descs_count;
+ const int super = !!func->ffs->ss_descs_count;
int fs_len, hs_len, ss_len, ret, i;
struct ffs_ep *eps_ptr;
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index df169c8e7225..37ef2ac9cdae 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -787,12 +787,12 @@ static struct urb *request_single_step_set_feature_urb(
atomic_inc(&urb->use_count);
atomic_inc(&urb->dev->urbnum);
urb->setup_dma = dma_map_single(
- hcd->self.controller,
+ hcd->self.sysdev,
urb->setup_packet,
sizeof(struct usb_ctrlrequest),
DMA_TO_DEVICE);
urb->transfer_dma = dma_map_single(
- hcd->self.controller,
+ hcd->self.sysdev,
urb->transfer_buffer,
urb->transfer_buffer_length,
DMA_FROM_DEVICE);
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 44924824fa41..1099465b27f0 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -73,6 +73,7 @@ static const char hcd_name [] = "ohci_hcd";
#define STATECHANGE_DELAY msecs_to_jiffies(300)
#define IO_WATCHDOG_DELAY msecs_to_jiffies(275)
+#define IO_WATCHDOG_OFF 0xffffff00
#include "ohci.h"
#include "pci-quirks.h"
@@ -230,7 +231,7 @@ static int ohci_urb_enqueue (
}
/* Start up the I/O watchdog timer, if it's not running */
- if (!timer_pending(&ohci->io_watchdog) &&
+ if (ohci->prev_frame_no == IO_WATCHDOG_OFF &&
list_empty(&ohci->eds_in_use) &&
!(ohci->flags & OHCI_QUIRK_QEMU)) {
ohci->prev_frame_no = ohci_frame_no(ohci);
@@ -501,6 +502,7 @@ static int ohci_init (struct ohci_hcd *ohci)
setup_timer(&ohci->io_watchdog, io_watchdog_func,
(unsigned long) ohci);
+ ohci->prev_frame_no = IO_WATCHDOG_OFF;
ohci->hcca = dma_alloc_coherent (hcd->self.controller,
sizeof(*ohci->hcca), &ohci->hcca_dma, GFP_KERNEL);
@@ -730,7 +732,7 @@ static void io_watchdog_func(unsigned long _ohci)
u32 head;
struct ed *ed;
struct td *td, *td_start, *td_next;
- unsigned frame_no;
+ unsigned frame_no, prev_frame_no = IO_WATCHDOG_OFF;
unsigned long flags;
spin_lock_irqsave(&ohci->lock, flags);
@@ -835,7 +837,7 @@ static void io_watchdog_func(unsigned long _ohci)
}
}
if (!list_empty(&ohci->eds_in_use)) {
- ohci->prev_frame_no = frame_no;
+ prev_frame_no = frame_no;
ohci->prev_wdh_cnt = ohci->wdh_cnt;
ohci->prev_donehead = ohci_readl(ohci,
&ohci->regs->donehead);
@@ -845,6 +847,7 @@ static void io_watchdog_func(unsigned long _ohci)
}
done:
+ ohci->prev_frame_no = prev_frame_no;
spin_unlock_irqrestore(&ohci->lock, flags);
}
@@ -973,6 +976,7 @@ static void ohci_stop (struct usb_hcd *hcd)
if (quirk_nec(ohci))
flush_work(&ohci->nec_work);
del_timer_sync(&ohci->io_watchdog);
+ ohci->prev_frame_no = IO_WATCHDOG_OFF;
ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
ohci_usb_reset(ohci);
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 248eb7702463..aca57bcb9afe 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -310,8 +310,10 @@ static int ohci_bus_suspend (struct usb_hcd *hcd)
rc = ohci_rh_suspend (ohci, 0);
spin_unlock_irq (&ohci->lock);
- if (rc == 0)
+ if (rc == 0) {
del_timer_sync(&ohci->io_watchdog);
+ ohci->prev_frame_no = IO_WATCHDOG_OFF;
+ }
return rc;
}
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index 641fed609911..24edb7674710 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -1018,6 +1018,8 @@ static void finish_unlinks(struct ohci_hcd *ohci)
* have modified this list. normally it's just prepending
* entries (which we'd ignore), but paranoia won't hurt.
*/
+ *last = ed->ed_next;
+ ed->ed_next = NULL;
modified = 0;
/* unlink urbs as requested, but rescan the list after
@@ -1076,21 +1078,22 @@ static void finish_unlinks(struct ohci_hcd *ohci)
goto rescan_this;
/*
- * If no TDs are queued, take ED off the ed_rm_list.
+ * If no TDs are queued, ED is now idle.
* Otherwise, if the HC is running, reschedule.
- * If not, leave it on the list for further dequeues.
+ * If the HC isn't running, add ED back to the
+ * start of the list for later processing.
*/
if (list_empty(&ed->td_list)) {
- *last = ed->ed_next;
- ed->ed_next = NULL;
ed->state = ED_IDLE;
list_del(&ed->in_use_list);
} else if (ohci->rh_state == OHCI_RH_RUNNING) {
- *last = ed->ed_next;
- ed->ed_next = NULL;
ed_schedule(ohci, ed);
} else {
- last = &ed->ed_next;
+ ed->ed_next = ohci->ed_rm_list;
+ ohci->ed_rm_list = ed;
+ /* Don't loop on the same ED */
+ if (last == &ohci->ed_rm_list)
+ last = &ed->ed_next;
}
if (modified)
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index 680bddb3ce05..6635a3c990f6 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -46,6 +46,9 @@
#define USB_DEVICE_ID_LD_MICROCASSYTIME 0x1033 /* USB Product ID of Micro-CASSY Time (reserved) */
#define USB_DEVICE_ID_LD_MICROCASSYTEMPERATURE 0x1035 /* USB Product ID of Micro-CASSY Temperature */
#define USB_DEVICE_ID_LD_MICROCASSYPH 0x1038 /* USB Product ID of Micro-CASSY pH */
+#define USB_DEVICE_ID_LD_POWERANALYSERCASSY 0x1040 /* USB Product ID of Power Analyser CASSY */
+#define USB_DEVICE_ID_LD_CONVERTERCONTROLLERCASSY 0x1042 /* USB Product ID of Converter Controller CASSY */
+#define USB_DEVICE_ID_LD_MACHINETESTCASSY 0x1043 /* USB Product ID of Machine Test CASSY */
#define USB_DEVICE_ID_LD_JWM 0x1080 /* USB Product ID of Joule and Wattmeter */
#define USB_DEVICE_ID_LD_DMMP 0x1081 /* USB Product ID of Digital Multimeter P (reserved) */
#define USB_DEVICE_ID_LD_UMIP 0x1090 /* USB Product ID of UMI P */
@@ -88,6 +91,9 @@ static const struct usb_device_id ld_usb_table[] = {
{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MICROCASSYTIME) },
{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MICROCASSYTEMPERATURE) },
{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MICROCASSYPH) },
+ { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POWERANALYSERCASSY) },
+ { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CONVERTERCONTROLLERCASSY) },
+ { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MACHINETESTCASSY) },
{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_JWM) },
{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_DMMP) },
{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_UMIP) },
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index b17450a59882..b5cc08d8aa22 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -418,13 +418,7 @@ static void musb_advance_schedule(struct musb *musb, struct urb *urb,
}
}
- /*
- * The pipe must be broken if current urb->status is set, so don't
- * start next urb.
- * TODO: to minimize the risk of regression, only check urb->status
- * for RX, until we have a test case to understand the behavior of TX.
- */
- if ((!status || !is_in) && qh && qh->is_ready) {
+ if (qh != NULL && qh->is_ready) {
musb_dbg(musb, "... next ep%d %cX urb %p",
hw_ep->epnum, is_in ? 'R' : 'T', next_urb(qh));
musb_start_urb(musb, is_in, qh);
diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c
index 50285b01da92..5d369b38868a 100644
--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -998,6 +998,10 @@ static int usbhsf_dma_prepare_pop_with_usb_dmac(struct usbhs_pkt *pkt,
if ((uintptr_t)pkt->buf & (USBHS_USB_DMAC_XFER_SIZE - 1))
goto usbhsf_pio_prepare_pop;
+ /* return at this time if the pipe is running */
+ if (usbhs_pipe_is_running(pipe))
+ return 0;
+
usbhs_pipe_config_change_bfre(pipe, 1);
ret = usbhsf_fifo_select(pipe, fifo, 0);
@@ -1188,6 +1192,7 @@ static int usbhsf_dma_pop_done_with_usb_dmac(struct usbhs_pkt *pkt,
usbhsf_fifo_clear(pipe, fifo);
pkt->actual = usbhs_dma_calc_received_size(pkt, chan, rcv_len);
+ usbhs_pipe_running(pipe, 0);
usbhsf_dma_stop(pipe, fifo);
usbhsf_dma_unmap(pkt);
usbhsf_fifo_unselect(pipe, pipe->fifo);
diff --git a/drivers/xen/tmem.c b/drivers/xen/tmem.c
index bf13d1ec51f3..04e7b3b29bac 100644
--- a/drivers/xen/tmem.c
+++ b/drivers/xen/tmem.c
@@ -284,6 +284,10 @@ static int tmem_frontswap_store(unsigned type, pgoff_t offset,
int pool = tmem_frontswap_poolid;
int ret;
+ /* THP isn't supported */
+ if (PageTransHuge(page))
+ return -1;
+
if (pool < 0)
return -1;
if (ind64 != ind)
diff --git a/include/linux/kconfig.h b/include/linux/kconfig.h
index fec5076eda91..dcde9471897d 100644
--- a/include/linux/kconfig.h
+++ b/include/linux/kconfig.h
@@ -4,6 +4,12 @@
#include <generated/autoconf.h>
+#ifdef CONFIG_CPU_BIG_ENDIAN
+#define __BIG_ENDIAN 4321
+#else
+#define __LITTLE_ENDIAN 1234
+#endif
+
#define __ARG_PLACEHOLDER_1 0,
#define __take_second_arg(__ignored, val, ...) val
@@ -64,4 +70,7 @@
*/
#define IS_ENABLED(option) __or(IS_BUILTIN(option), IS_MODULE(option))
+/* Make sure we always have all types and struct attributes defined. */
+#include <linux/compiler_types.h>
+
#endif /* __LINUX_KCONFIG_H */
diff --git a/mm/zswap.c b/mm/zswap.c
index d39581a076c3..597008a44f70 100644
--- a/mm/zswap.c
+++ b/mm/zswap.c
@@ -970,6 +970,12 @@ static int zswap_frontswap_store(unsigned type, pgoff_t offset,
u8 *src, *dst;
struct zswap_header *zhdr;
+ /* THP isn't supported */
+ if (PageTransHuge(page)) {
+ ret = -EINVAL;
+ goto reject;
+ }
+
if (!zswap_enabled || !tree) {
ret = -ENODEV;
goto reject;
diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c
index c7df4969f80a..f56aab54e0c8 100644
--- a/net/ipv4/ip_sockglue.c
+++ b/net/ipv4/ip_sockglue.c
@@ -1563,10 +1563,7 @@ int ip_getsockopt(struct sock *sk, int level,
if (get_user(len, optlen))
return -EFAULT;
- lock_sock(sk);
- err = nf_getsockopt(sk, PF_INET, optname, optval,
- &len);
- release_sock(sk);
+ err = nf_getsockopt(sk, PF_INET, optname, optval, &len);
if (err >= 0)
err = put_user(len, optlen);
return err;
@@ -1598,9 +1595,7 @@ int compat_ip_getsockopt(struct sock *sk, int level, int optname,
if (get_user(len, optlen))
return -EFAULT;
- lock_sock(sk);
err = compat_nf_getsockopt(sk, PF_INET, optname, optval, &len);
- release_sock(sk);
if (err >= 0)
err = put_user(len, optlen);
return err;
diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c
index 24b69384bdbf..1276d5bd5675 100644
--- a/net/ipv6/ipv6_sockglue.c
+++ b/net/ipv6/ipv6_sockglue.c
@@ -1355,10 +1355,7 @@ int ipv6_getsockopt(struct sock *sk, int level, int optname,
if (get_user(len, optlen))
return -EFAULT;
- lock_sock(sk);
- err = nf_getsockopt(sk, PF_INET6, optname, optval,
- &len);
- release_sock(sk);
+ err = nf_getsockopt(sk, PF_INET6, optname, optval, &len);
if (err >= 0)
err = put_user(len, optlen);
}
@@ -1397,10 +1394,7 @@ int compat_ipv6_getsockopt(struct sock *sk, int level, int optname,
if (get_user(len, optlen))
return -EFAULT;
- lock_sock(sk);
- err = compat_nf_getsockopt(sk, PF_INET6,
- optname, optval, &len);
- release_sock(sk);
+ err = compat_nf_getsockopt(sk, PF_INET6, optname, optval, &len);
if (err >= 0)
err = put_user(len, optlen);
}
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index fb15d3b97cb2..84f757c5d91a 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -2863,7 +2863,7 @@ cfg80211_beacon_dup(struct cfg80211_beacon_data *beacon)
}
if (beacon->probe_resp_len) {
new_beacon->probe_resp_len = beacon->probe_resp_len;
- beacon->probe_resp = pos;
+ new_beacon->probe_resp = pos;
memcpy(pos, beacon->probe_resp, beacon->probe_resp_len);
pos += beacon->probe_resp_len;
}
prev parent reply other threads:[~2018-02-28 12:10 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-28 12:09 Linux 4.14.23 Greg KH
2018-02-28 12:10 ` Greg KH [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180228121003.GB16637@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=jslaby@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=lwn@lwn.net \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.