Re: [PATCH v4 1/4] HID: add driver for Valve Steam Controller

[Marcus Folkesson <marcus.folkesson@gmail.com>]

Rodrigo,

On Wed, Feb 28, 2018 at 11:49:26PM +0100, Rodrigo Rivas Costa wrote:
> On Wed, Feb 28, 2018 at 09:21:15PM +0200, Andy Shevchenko wrote:
> > On Wed, Feb 28, 2018 at 8:43 PM, Rodrigo Rivas Costa
> > <rodrigorivascosta@gmail.com> wrote:
> > > There are two ways to connect the Steam Controller: directly to the USB
> > > or with the USB wireless adapter.  Both methods are similar, but the
> > > wireless adapter can connect up to 4 devices at the same time.
> > >
> > > The wired device will appear as 3 interfaces: a virtual mouse, a virtual
> > > keyboard and a custom HID device.
> > >
> > > The wireless device will appear as 5 interfaces: a virtual keyboard and
> > > 4 custom HID devices, that will remain silent until a device is actually
> > > connected.
> > >
> > > The custom HID device has a report descriptor with all vendor specific
> > > usages, so the hid-generic is not very useful. In a PC/SteamBox Valve
> > > Steam Client provices a software translation by using direct USB access
> > > and a creates a uinput virtual gamepad.
> > >
> > > This driver was reverse engineered to provide direct kernel support in
> > > case you cannot, or do not want to, use Valve Steam Client. It disables
> > > the virtual keyboard and mouse, as they are not so useful when you have
> > > a working gamepad.
> > 
> > 
> > > +// SPDX-License-Identifier: GPL-2.0
> > 
> > > +MODULE_LICENSE("GPL");
> > 
> > Not the same.
> 
> Hmmm... I copied from usb-skeleton.c, IIRC...
> I'll change to GPL-2.0+, that would be correct, I think.

Yep, the usb-skeleton.c is wrong.
I have prepared a patch, just not submitted it yet..

GPL-2.0+ is "GPLv2 or later" if that is what you want.

Best regards
Marcus Folkesson