From: "Daniel P. Berrangé" <berrange@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Daniel P. Berrangé" <berrange@redhat.com>,
"Gerd Hoffmann" <kraxel@redhat.com>,
"Markus Armbruster" <armbru@redhat.com>,
"Eric Blake" <eblake@redhat.com>,
"Marc-André Lureau" <marcandre.lureau@redhat.com>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Peter Maydell" <peter.maydell@linaro.org>
Subject: [Qemu-devel] [PULL 6/9] sockets: check that the named file descriptor is a socket
Date: Mon, 12 Mar 2018 20:13:02 +0000 [thread overview]
Message-ID: <20180312201305.16972-7-berrange@redhat.com> (raw)
In-Reply-To: <20180312201305.16972-1-berrange@redhat.com>
From: "Daniel P. Berrange" <berrange@redhat.com>
The SocketAddress struct has an "fd" type, which references the name of a
file descriptor passed over the monitor using the "getfd" command. We
currently blindly assume the FD is a socket, which can lead to hard to
diagnose errors later. This adds an explicit check that the FD is actually
a socket to improve the error diagnosis.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
---
tests/test-util-sockets.c | 89 +++++++++++++++++++++++++++++++++++++++++++++++
util/qemu-sockets.c | 18 ++++++++--
2 files changed, 105 insertions(+), 2 deletions(-)
diff --git a/tests/test-util-sockets.c b/tests/test-util-sockets.c
index 65190e0530..06eb0e4a28 100644
--- a/tests/test-util-sockets.c
+++ b/tests/test-util-sockets.c
@@ -23,6 +23,7 @@
#include "qemu/sockets.h"
#include "qapi/error.h"
#include "socket-helpers.h"
+#include "monitor/monitor.h"
static void test_fd_is_socket_bad(void)
{
@@ -49,6 +50,90 @@ static void test_fd_is_socket_good(void)
close(fd);
}
+static int mon_fd = -1;
+static const char *mon_fdname;
+
+int monitor_get_fd(Monitor *mon, const char *fdname, Error **errp)
+{
+ g_assert(cur_mon);
+ g_assert(mon == cur_mon);
+ if (mon_fd == -1 || !g_str_equal(mon_fdname, fdname)) {
+ error_setg(errp, "No fd named %s", fdname);
+ return -1;
+ }
+ return dup(mon_fd);
+}
+
+/* Syms in libqemustub.a are discarded at .o file granularity.
+ * To replace monitor_get_fd() we must ensure everything in
+ * stubs/monitor.c is defined, to make sure monitor.o is discarded
+ * otherwise we get duplicate syms at link time.
+ */
+Monitor *cur_mon;
+void monitor_init(Chardev *chr, int flags) {}
+
+
+static void test_socket_fd_pass_good(void)
+{
+ SocketAddress addr;
+ int fd;
+
+ cur_mon = g_malloc(1); /* Fake a monitor */
+ mon_fdname = "myfd";
+ mon_fd = qemu_socket(AF_INET, SOCK_STREAM, 0);
+ g_assert_cmpint(mon_fd, >, STDERR_FILENO);
+
+ addr.type = SOCKET_ADDRESS_TYPE_FD;
+ addr.u.fd.str = g_strdup(mon_fdname);
+
+ fd = socket_connect(&addr, &error_abort);
+ g_assert_cmpint(fd, !=, -1);
+ g_assert_cmpint(fd, !=, mon_fd);
+ close(fd);
+
+ fd = socket_listen(&addr, &error_abort);
+ g_assert_cmpint(fd, !=, -1);
+ g_assert_cmpint(fd, !=, mon_fd);
+ close(fd);
+
+ g_free(addr.u.fd.str);
+ mon_fdname = NULL;
+ close(mon_fd);
+ mon_fd = -1;
+ g_free(cur_mon);
+ cur_mon = NULL;
+}
+
+static void test_socket_fd_pass_bad(void)
+{
+ SocketAddress addr;
+ Error *err = NULL;
+ int fd;
+
+ cur_mon = g_malloc(1); /* Fake a monitor */
+ mon_fdname = "myfd";
+ mon_fd = dup(STDOUT_FILENO);
+ g_assert_cmpint(mon_fd, >, STDERR_FILENO);
+
+ addr.type = SOCKET_ADDRESS_TYPE_FD;
+ addr.u.fd.str = g_strdup(mon_fdname);
+
+ fd = socket_connect(&addr, &err);
+ g_assert_cmpint(fd, ==, -1);
+ error_free_or_abort(&err);
+
+ fd = socket_listen(&addr, &err);
+ g_assert_cmpint(fd, ==, -1);
+ error_free_or_abort(&err);
+
+ g_free(addr.u.fd.str);
+ mon_fdname = NULL;
+ close(mon_fd);
+ mon_fd = -1;
+ g_free(cur_mon);
+ cur_mon = NULL;
+}
+
int main(int argc, char **argv)
{
bool has_ipv4, has_ipv6;
@@ -71,6 +156,10 @@ int main(int argc, char **argv)
test_fd_is_socket_bad);
g_test_add_func("/util/socket/is-socket/good",
test_fd_is_socket_good);
+ g_test_add_func("/socket/fd-pass/good",
+ test_socket_fd_pass_good);
+ g_test_add_func("/socket/fd-pass/bad",
+ test_socket_fd_pass_bad);
}
return g_test_run();
diff --git a/util/qemu-sockets.c b/util/qemu-sockets.c
index fa79471647..6dc4613855 100644
--- a/util/qemu-sockets.c
+++ b/util/qemu-sockets.c
@@ -1042,6 +1042,20 @@ fail:
return NULL;
}
+static int socket_get_fd(const char *fdstr, Error **errp)
+{
+ int fd = monitor_get_fd(cur_mon, fdstr, errp);
+ if (fd < 0) {
+ return -1;
+ }
+ if (!fd_is_socket(fd)) {
+ error_setg(errp, "File descriptor '%s' is not a socket", fdstr);
+ close(fd);
+ return -1;
+ }
+ return fd;
+}
+
int socket_connect(SocketAddress *addr, Error **errp)
{
int fd;
@@ -1056,7 +1070,7 @@ int socket_connect(SocketAddress *addr, Error **errp)
break;
case SOCKET_ADDRESS_TYPE_FD:
- fd = monitor_get_fd(cur_mon, addr->u.fd.str, errp);
+ fd = socket_get_fd(addr->u.fd.str, errp);
break;
case SOCKET_ADDRESS_TYPE_VSOCK:
@@ -1083,7 +1097,7 @@ int socket_listen(SocketAddress *addr, Error **errp)
break;
case SOCKET_ADDRESS_TYPE_FD:
- fd = monitor_get_fd(cur_mon, addr->u.fd.str, errp);
+ fd = socket_get_fd(addr->u.fd.str, errp);
break;
case SOCKET_ADDRESS_TYPE_VSOCK:
--
2.14.3
next prev parent reply other threads:[~2018-03-12 20:13 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-12 20:12 [Qemu-devel] [PULL 0/9] Socket next patches Daniel P. Berrangé
2018-03-12 20:12 ` [Qemu-devel] [PULL 1/9] char: don't silently skip tn3270 protocol init when TLS is enabled Daniel P. Berrangé
2018-03-12 20:12 ` [Qemu-devel] [PULL 2/9] cutils: add qemu_strtoi & qemu_strtoui parsers for int/unsigned int types Daniel P. Berrangé
2018-03-13 18:11 ` Daniel P. Berrangé
2018-03-13 19:10 ` Kamil Rytarowski
2018-03-12 20:12 ` [Qemu-devel] [PULL 3/9] sockets: pull code for testing IP availability out of specific test Daniel P. Berrangé
2018-03-12 20:13 ` [Qemu-devel] [PULL 4/9] sockets: strengthen test suite IP protocol availability checks Daniel P. Berrangé
2018-03-12 20:13 ` [Qemu-devel] [PULL 5/9] sockets: move fd_is_socket() into common sockets code Daniel P. Berrangé
2018-03-12 20:13 ` Daniel P. Berrangé [this message]
2018-03-12 20:13 ` [Qemu-devel] [PULL 7/9] sockets: allow SocketAddress 'fd' to reference numeric file descriptors Daniel P. Berrangé
2018-03-12 20:13 ` [Qemu-devel] [PULL 8/9] char: refactor parsing of socket address information Daniel P. Berrangé
2018-03-12 20:13 ` [Qemu-devel] [PULL 9/9] char: allow passing pre-opened socket file descriptor at startup Daniel P. Berrangé
2018-03-12 20:27 ` [Qemu-devel] [PULL 0/9] Socket next patches no-reply
2018-03-13 16:20 ` Peter Maydell
2018-03-13 16:27 ` Daniel P. Berrangé
2018-03-13 18:23 ` Daniel P. Berrangé
2018-03-13 18:26 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180312201305.16972-7-berrange@redhat.com \
--to=berrange@redhat.com \
--cc=armbru@redhat.com \
--cc=eblake@redhat.com \
--cc=kraxel@redhat.com \
--cc=marcandre.lureau@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.