From: Brandon Williams <bmwill@google.com>
To: git@vger.kernel.org
Cc: git@jeffhostetler.com, gitster@pobox.com, jrnieder@gmail.com,
pclouds@gmail.com, peff@peff.net, sbeller@google.com,
stolee@gmail.com, jonathantanmy@google.com,
Brandon Williams <bmwill@google.com>
Subject: [PATCH v6 22/35] fetch-pack: support shallow requests
Date: Thu, 15 Mar 2018 10:31:29 -0700 [thread overview]
Message-ID: <20180315173142.176023-23-bmwill@google.com> (raw)
In-Reply-To: <20180315173142.176023-1-bmwill@google.com>
Enable shallow clones and deepen requests using protocol version 2 if
the server 'fetch' command supports the 'shallow' feature.
Signed-off-by: Brandon Williams <bmwill@google.com>
---
Documentation/technical/protocol-v2.txt | 18 ++++---
connect.c | 22 ++++++++
connect.h | 2 +
fetch-pack.c | 71 ++++++++++++++++++++++++-
4 files changed, 105 insertions(+), 8 deletions(-)
diff --git a/Documentation/technical/protocol-v2.txt b/Documentation/technical/protocol-v2.txt
index 4f7f251569..136179d7d8 100644
--- a/Documentation/technical/protocol-v2.txt
+++ b/Documentation/technical/protocol-v2.txt
@@ -255,6 +255,10 @@ A `fetch` request can take the following arguments:
to its base by position in pack rather than by an oid. That is,
they can read OBJ_OFS_DELTA (ake type 6) in a packfile.
+If the 'shallow' feature is advertised the following arguments can be
+included in the clients request as well as the potential addition of the
+'shallow-info' section in the server's response as explained below.
+
shallow <oid>
A client must notify the server of all commits for which it only
has shallow copies (meaning that it doesn't have the parents of
@@ -338,13 +342,13 @@ header.
further negotiation is needed.
shallow-info section
- If the client has requested a shallow fetch/clone, a shallow
- client requests a fetch or the server is shallow then the
- server's response may include a shallow-info section. The
- shallow-info section will be included if (due to one of the
- above conditions) the server needs to inform the client of any
- shallow boundaries or adjustments to the clients already
- existing shallow boundaries.
+ * If the client has requested a shallow fetch/clone, a shallow
+ client requests a fetch or the server is shallow then the
+ server's response may include a shallow-info section. The
+ shallow-info section will be included if (due to one of the
+ above conditions) the server needs to inform the client of any
+ shallow boundaries or adjustments to the clients already
+ existing shallow boundaries.
* Always begins with the section header "shallow-info"
diff --git a/connect.c b/connect.c
index e42d779f71..5bb9d34844 100644
--- a/connect.c
+++ b/connect.c
@@ -82,6 +82,28 @@ int server_supports_v2(const char *c, int die_on_error)
return 0;
}
+int server_supports_feature(const char *c, const char *feature,
+ int die_on_error)
+{
+ int i;
+
+ for (i = 0; i < server_capabilities_v2.argc; i++) {
+ const char *out;
+ if (skip_prefix(server_capabilities_v2.argv[i], c, &out) &&
+ (!*out || *(out++) == '=')) {
+ if (parse_feature_request(out, feature))
+ return 1;
+ else
+ break;
+ }
+ }
+
+ if (die_on_error)
+ die("server doesn't support feature '%s'", feature);
+
+ return 0;
+}
+
static void process_capabilities_v2(struct packet_reader *reader)
{
while (packet_reader_read(reader) == PACKET_READ_NORMAL)
diff --git a/connect.h b/connect.h
index 8898d44952..0e69c6709c 100644
--- a/connect.h
+++ b/connect.h
@@ -17,5 +17,7 @@ struct packet_reader;
extern enum protocol_version discover_version(struct packet_reader *reader);
extern int server_supports_v2(const char *c, int die_on_error);
+extern int server_supports_feature(const char *c, const char *feature,
+ int die_on_error);
#endif
diff --git a/fetch-pack.c b/fetch-pack.c
index dffcfd66a5..837e1fd21d 100644
--- a/fetch-pack.c
+++ b/fetch-pack.c
@@ -1008,6 +1008,26 @@ static struct ref *do_fetch_pack(struct fetch_pack_args *args,
return ref;
}
+static void add_shallow_requests(struct strbuf *req_buf,
+ const struct fetch_pack_args *args)
+{
+ if (is_repository_shallow())
+ write_shallow_commits(req_buf, 1, NULL);
+ if (args->depth > 0)
+ packet_buf_write(req_buf, "deepen %d", args->depth);
+ if (args->deepen_since) {
+ timestamp_t max_age = approxidate(args->deepen_since);
+ packet_buf_write(req_buf, "deepen-since %"PRItime, max_age);
+ }
+ if (args->deepen_not) {
+ int i;
+ for (i = 0; i < args->deepen_not->nr; i++) {
+ struct string_list_item *s = args->deepen_not->items + i;
+ packet_buf_write(req_buf, "deepen-not %s", s->string);
+ }
+ }
+}
+
static void add_wants(const struct ref *wants, struct strbuf *req_buf)
{
for ( ; wants ; wants = wants->next) {
@@ -1093,6 +1113,12 @@ static int send_fetch_request(int fd_out, const struct fetch_pack_args *args,
if (prefer_ofs_delta)
packet_buf_write(&req_buf, "ofs-delta");
+ /* Add shallow-info and deepen request */
+ if (server_supports_feature("fetch", "shallow", 0))
+ add_shallow_requests(&req_buf, args);
+ else if (is_repository_shallow() || args->deepen)
+ die(_("Server does not support shallow requests"));
+
/* add wants */
add_wants(wants, &req_buf);
@@ -1122,7 +1148,7 @@ static int process_section_header(struct packet_reader *reader,
int ret;
if (packet_reader_peek(reader) != PACKET_READ_NORMAL)
- die("error reading packet");
+ die("error reading section header '%s'", section);
ret = !strcmp(reader->line, section);
@@ -1177,6 +1203,43 @@ static int process_acks(struct packet_reader *reader, struct oidset *common)
return received_ready ? 2 : (received_ack ? 1 : 0);
}
+static void receive_shallow_info(struct fetch_pack_args *args,
+ struct packet_reader *reader)
+{
+ process_section_header(reader, "shallow-info", 0);
+ while (packet_reader_read(reader) == PACKET_READ_NORMAL) {
+ const char *arg;
+ struct object_id oid;
+
+ if (skip_prefix(reader->line, "shallow ", &arg)) {
+ if (get_oid_hex(arg, &oid))
+ die(_("invalid shallow line: %s"), reader->line);
+ register_shallow(&oid);
+ continue;
+ }
+ if (skip_prefix(reader->line, "unshallow ", &arg)) {
+ if (get_oid_hex(arg, &oid))
+ die(_("invalid unshallow line: %s"), reader->line);
+ if (!lookup_object(oid.hash))
+ die(_("object not found: %s"), reader->line);
+ /* make sure that it is parsed as shallow */
+ if (!parse_object(&oid))
+ die(_("error in object: %s"), reader->line);
+ if (unregister_shallow(&oid))
+ die(_("no shallow found: %s"), reader->line);
+ continue;
+ }
+ die(_("expected shallow/unshallow, got %s"), reader->line);
+ }
+
+ if (reader->status != PACKET_READ_FLUSH &&
+ reader->status != PACKET_READ_DELIM)
+ die("error processing shallow info: %d", reader->status);
+
+ setup_alternate_shallow(&shallow_lock, &alternate_shallow_file, NULL);
+ args->deepen = 1;
+}
+
enum fetch_state {
FETCH_CHECK_LOCAL = 0,
FETCH_SEND_REQUEST,
@@ -1209,6 +1272,8 @@ static struct ref *do_fetch_pack_v2(struct fetch_pack_args *args,
/* v2 supports these by default */
allow_unadvertised_object_request |= ALLOW_REACHABLE_SHA1;
use_sideband = 2;
+ if (args->depth > 0 || args->deepen_since || args->deepen_not)
+ args->deepen = 1;
if (marked)
for_each_ref(clear_marks, NULL);
@@ -1245,6 +1310,10 @@ static struct ref *do_fetch_pack_v2(struct fetch_pack_args *args,
}
break;
case FETCH_GET_PACK:
+ /* Check for shallow-info section */
+ if (process_section_header(&reader, "shallow-info", 1))
+ receive_shallow_info(args, &reader);
+
/* get the pack */
process_section_header(&reader, "packfile", 0);
if (get_pack(args, fd, pack_lockfile))
--
2.16.2.804.g6dcf76e118-goog
next prev parent reply other threads:[~2018-03-15 17:32 UTC|newest]
Thread overview: 85+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-14 18:31 [PATCH v5 00/35] protocol version 2 Brandon Williams
2018-03-14 18:31 ` [PATCH v5 01/35] pkt-line: introduce packet_read_with_status Brandon Williams
2018-03-14 21:33 ` Junio C Hamano
2018-03-15 17:28 ` Brandon Williams
2018-03-15 18:37 ` Junio C Hamano
2018-03-14 18:31 ` [PATCH v5 02/35] pkt-line: allow peeking a packet line without consuming it Brandon Williams
2018-03-14 18:31 ` [PATCH v5 03/35] pkt-line: add delim packet support Brandon Williams
2018-03-14 18:31 ` [PATCH v5 04/35] upload-pack: convert to a builtin Brandon Williams
2018-03-14 18:31 ` [PATCH v5 05/35] upload-pack: factor out processing lines Brandon Williams
2018-03-14 18:31 ` [PATCH v5 06/35] transport: use get_refs_via_connect to get refs Brandon Williams
2018-03-14 18:31 ` [PATCH v5 07/35] connect: convert get_remote_heads to use struct packet_reader Brandon Williams
2018-03-14 18:31 ` [PATCH v5 08/35] connect: discover protocol version outside of get_remote_heads Brandon Williams
2018-03-14 18:31 ` [PATCH v5 09/35] transport: store protocol version Brandon Williams
2018-03-14 18:31 ` [PATCH v5 10/35] protocol: introduce enum protocol_version value protocol_v2 Brandon Williams
2018-03-14 18:31 ` [PATCH v5 11/35] test-pkt-line: introduce a packet-line test helper Brandon Williams
2018-03-14 18:31 ` [PATCH v5 12/35] serve: introduce git-serve Brandon Williams
2018-03-14 22:01 ` Junio C Hamano
2018-03-15 17:27 ` Brandon Williams
2018-03-14 18:31 ` [PATCH v5 13/35] ls-refs: introduce ls-refs server command Brandon Williams
2018-03-14 18:31 ` [PATCH v5 14/35] connect: request remote refs using v2 Brandon Williams
2018-03-14 18:31 ` [PATCH v5 15/35] transport: convert get_refs_list to take a list of ref prefixes Brandon Williams
2018-03-14 18:31 ` [PATCH v5 16/35] transport: convert transport_get_remote_refs " Brandon Williams
2018-03-14 18:31 ` [PATCH v5 17/35] ls-remote: pass ref prefixes when requesting a remote's refs Brandon Williams
2018-03-14 18:31 ` [PATCH v5 18/35] fetch: pass ref prefixes when fetching Brandon Williams
2018-03-14 18:31 ` [PATCH v5 19/35] push: pass ref prefixes when pushing Brandon Williams
2018-03-14 18:31 ` [PATCH v5 20/35] upload-pack: introduce fetch server command Brandon Williams
2018-03-14 18:31 ` [PATCH v5 21/35] fetch-pack: perform a fetch using v2 Brandon Williams
2018-03-14 18:31 ` [PATCH v5 22/35] fetch-pack: support shallow requests Brandon Williams
2018-03-14 18:32 ` [PATCH v5 23/35] connect: refactor git_connect to only get the protocol version once Brandon Williams
2018-03-14 18:32 ` [PATCH v5 24/35] connect: don't request v2 when pushing Brandon Williams
2018-03-14 18:32 ` [PATCH v5 25/35] transport-helper: remove name parameter Brandon Williams
2018-03-14 18:32 ` [PATCH v5 26/35] transport-helper: refactor process_connect_service Brandon Williams
2018-03-14 18:32 ` [PATCH v5 27/35] transport-helper: introduce stateless-connect Brandon Williams
2018-03-14 18:32 ` [PATCH v5 28/35] pkt-line: add packet_buf_write_len function Brandon Williams
2018-03-14 18:32 ` [PATCH v5 29/35] remote-curl: create copy of the service name Brandon Williams
2018-03-14 18:32 ` [PATCH v5 30/35] remote-curl: store the protocol version the server responded with Brandon Williams
2018-03-14 18:32 ` [PATCH v5 31/35] http: allow providing extra headers for http requests Brandon Williams
2018-03-14 18:32 ` [PATCH v5 32/35] http: don't always add Git-Protocol header Brandon Williams
2018-03-14 18:32 ` [PATCH v5 33/35] http: eliminate "# service" line when using protocol v2 Brandon Williams
2018-03-14 18:32 ` [PATCH v5 34/35] remote-curl: implement stateless-connect command Brandon Williams
2018-03-14 18:32 ` [PATCH v5 35/35] remote-curl: don't request v2 when pushing Brandon Williams
2018-03-15 17:31 ` [PATCH v6 00/35] protocol version 2 Brandon Williams
2018-03-15 17:31 ` [PATCH v6 01/35] pkt-line: introduce packet_read_with_status Brandon Williams
2018-03-15 17:31 ` [PATCH v6 02/35] pkt-line: allow peeking a packet line without consuming it Brandon Williams
2018-03-15 17:31 ` [PATCH v6 03/35] pkt-line: add delim packet support Brandon Williams
2018-03-15 17:31 ` [PATCH v6 04/35] upload-pack: convert to a builtin Brandon Williams
2018-03-15 17:31 ` [PATCH v6 05/35] upload-pack: factor out processing lines Brandon Williams
2018-03-15 17:31 ` [PATCH v6 06/35] transport: use get_refs_via_connect to get refs Brandon Williams
2018-03-15 17:31 ` [PATCH v6 07/35] connect: convert get_remote_heads to use struct packet_reader Brandon Williams
2018-03-27 15:27 ` Duy Nguyen
2018-03-27 16:11 ` Jeff King
2018-03-27 16:25 ` Duy Nguyen
2018-03-27 16:39 ` Duy Nguyen
2018-03-27 16:58 ` Brandon Williams
2018-03-15 17:31 ` [PATCH v6 08/35] connect: discover protocol version outside of get_remote_heads Brandon Williams
2018-03-15 17:31 ` [PATCH v6 09/35] transport: store protocol version Brandon Williams
2018-03-15 17:31 ` [PATCH v6 10/35] protocol: introduce enum protocol_version value protocol_v2 Brandon Williams
2018-03-15 17:31 ` [PATCH v6 11/35] test-pkt-line: introduce a packet-line test helper Brandon Williams
2018-03-15 17:31 ` [PATCH v6 12/35] serve: introduce git-serve Brandon Williams
2018-03-15 17:31 ` [PATCH v6 13/35] ls-refs: introduce ls-refs server command Brandon Williams
2018-03-15 17:31 ` [PATCH v6 14/35] connect: request remote refs using v2 Brandon Williams
2018-03-15 17:31 ` [PATCH v6 15/35] transport: convert get_refs_list to take a list of ref prefixes Brandon Williams
2018-03-15 17:31 ` [PATCH v6 16/35] transport: convert transport_get_remote_refs " Brandon Williams
2018-03-15 17:31 ` [PATCH v6 17/35] ls-remote: pass ref prefixes when requesting a remote's refs Brandon Williams
2018-03-15 17:31 ` [PATCH v6 18/35] fetch: pass ref prefixes when fetching Brandon Williams
2018-03-15 17:31 ` [PATCH v6 19/35] push: pass ref prefixes when pushing Brandon Williams
2018-03-15 17:31 ` [PATCH v6 20/35] upload-pack: introduce fetch server command Brandon Williams
2018-03-15 17:31 ` [PATCH v6 21/35] fetch-pack: perform a fetch using v2 Brandon Williams
2018-03-15 17:31 ` Brandon Williams [this message]
2018-03-15 17:31 ` [PATCH v6 23/35] connect: refactor git_connect to only get the protocol version once Brandon Williams
2018-03-15 17:31 ` [PATCH v6 24/35] connect: don't request v2 when pushing Brandon Williams
2018-03-15 17:31 ` [PATCH v6 25/35] transport-helper: remove name parameter Brandon Williams
2018-03-15 17:31 ` [PATCH v6 26/35] transport-helper: refactor process_connect_service Brandon Williams
2018-03-15 17:31 ` [PATCH v6 27/35] transport-helper: introduce stateless-connect Brandon Williams
2018-03-15 17:31 ` [PATCH v6 28/35] pkt-line: add packet_buf_write_len function Brandon Williams
2018-03-15 17:31 ` [PATCH v6 29/35] remote-curl: create copy of the service name Brandon Williams
2018-03-15 17:31 ` [PATCH v6 30/35] remote-curl: store the protocol version the server responded with Brandon Williams
2018-03-15 17:31 ` [PATCH v6 31/35] http: allow providing extra headers for http requests Brandon Williams
2018-03-15 17:31 ` [PATCH v6 32/35] http: don't always add Git-Protocol header Brandon Williams
2018-03-15 17:31 ` [PATCH v6 33/35] http: eliminate "# service" line when using protocol v2 Brandon Williams
2018-03-15 17:31 ` [PATCH v6 34/35] remote-curl: implement stateless-connect command Brandon Williams
2018-03-15 17:31 ` [PATCH v6 35/35] remote-curl: don't request v2 when pushing Brandon Williams
2018-03-30 9:29 ` [PATCH] {fetch,upload}-pack: clearly mark unreachable v2 code Ævar Arnfjörð Bjarmason
2018-03-30 19:03 ` Brandon Williams
2018-03-30 19:06 ` Stefan Beller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180315173142.176023-23-bmwill@google.com \
--to=bmwill@google.com \
--cc=git@jeffhostetler.com \
--cc=git@vger.kernel.org \
--cc=gitster@pobox.com \
--cc=jonathantanmy@google.com \
--cc=jrnieder@gmail.com \
--cc=pclouds@gmail.com \
--cc=peff@peff.net \
--cc=sbeller@google.com \
--cc=stolee@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.